no download possible via USB mass storage

[Uwe Haider]

Hi together,

back again with a problem I can't solve for me alone.

I got a few digicams here (Nikon D50, Casio Exilim Z9, Sanyo, Pentax). A
few weeks ago all are working fine with the digikam download. Since I
bought the Casio the download of all is broken...

I simply get the message "Es ist ein Fehler aufgetreten" (= an error
occurred). Nothing else.

The camera ist detectet and shows up. I have permissions to write to my
digikam-drive - extern USB Western Digital with 320 GB.

I am busy making pictures, so I have to download urgently. Where should
I search for the reason of this strange behavior?

Every hint or tip is very much appreciated - thanks a lot!
--
Mit freundlichen Grüßen/best regards

Uwe Haider
[hidden email]
http://www.familie-haider.de

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

Dnia Tuesday 16 of September 2008, Uwe Haider napisał:
> Every hint or tip is very much appreciated - thanks a lot!

Quick solution: try to download outside of digiKam and import later.

For digiKam try to start from konsole and copy'n'paste messages from it.

m.

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

Op Tuesday 16 September 2008, schreef Uwe Haider:

> Every hint or tip is very much appreciated - thanks a lot!

I always use an external card reader myself. Never had any problems, doesn't
drain the camera batteries and is lightning fast. That's what i would
recommend.

Dennis

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Uwe Haider]

Card Reader doesn't works too... There appears no device, no files...

Perhaps an USB-Problem?

But the pictures show up in digikam or thunar, showfoto etc... So usb
works a bit?
Kernel is 2.6.25-gentoo-r7. I am not sure, how to config the kernel for
usb.

best regards
uwe



Am Mittwoch, den 17.09.2008, 09:11 +0200 schrieb Dennis Meulensteen:

> Op Tuesday 16 September 2008, schreef Uwe Haider:
>
> > Every hint or tip is very much appreciated - thanks a lot!
>
> I always use an external card reader myself. Never had any problems, doesn't
> drain the camera batteries and is lightning fast. That's what i would
> recommend.
>
> Dennis
>
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users

--
Mit freundlichen Grüßen

Uwe Haider
[hidden email]
http://www.familie-haider.de

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Uwe Haider]

ok, here we go:

starting digikam in terminal I get this errors after opening my nikon
D50:

digikam: WARNING: media:/camera mlu media:/camera
File 'curve.ntc' is not readable.
File 'curve.ntc' is not readable.
File 'DSC_0001.JPG' is not readable.

The files can be shown in Showfoto direct from the Nikon. Nikon can be
opened with the filemanager.

Any ideas? Once upon a time it works fine....:O

best regards

uwe

Am Mittwoch, den 17.09.2008, 21:54 +0200 schrieb Uwe Haider:

> Card Reader doesn't works too... There appears no device, no files...
>
> Perhaps an USB-Problem?
>
> But the pictures show up in digikam or thunar, showfoto etc... So usb
> works a bit?
> Kernel is 2.6.25-gentoo-r7. I am not sure, how to config the kernel for
> usb.
>
> best regards
> uwe
>
>
>
> Am Mittwoch, den 17.09.2008, 09:11 +0200 schrieb Dennis Meulensteen:
> > Op Tuesday 16 September 2008, schreef Uwe Haider:
> >
> > > Every hint or tip is very much appreciated - thanks a lot!
> >
> > I always use an external card reader myself. Never had any problems, doesn't
> > drain the camera batteries and is lightning fast. That's what i would
> > recommend.
> >
> > Dennis
> >
> > _______________________________________________
> > Digikam-users mailing list
> > [hidden email]
> > https://mail.kde.org/mailman/listinfo/digikam-users

--
Mit freundlichen Grüßen

Uwe Haider
[hidden email]
http://www.familie-haider.de

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Uwe Haider]

It is getting better, isn't it?

I got roundabout 20 files down from the nikon. But the others give the
same error.

I used usb direct from the Nikon with usb mass storage mode in digikam.

Any ideas?

best regards
uwe


Am Sonntag, den 21.09.2008, 13:38 +0200 schrieb Uwe Haider:

> ok, here we go:
>
> starting digikam in terminal I get this errors after opening my nikon
> D50:
>
> digikam: WARNING: media:/camera mlu media:/camera
> File 'curve.ntc' is not readable.
> File 'curve.ntc' is not readable.
> File 'DSC_0001.JPG' is not readable.
>
> The files can be shown in Showfoto direct from the Nikon. Nikon can be
> opened with the filemanager.
>
> Any ideas? Once upon a time it works fine....:O
>
> best regards
>
> uwe
>
> Am Mittwoch, den 17.09.2008, 21:54 +0200 schrieb Uwe Haider:
> > Card Reader doesn't works too... There appears no device, no files...
> >
> > Perhaps an USB-Problem?
> >
> > But the pictures show up in digikam or thunar, showfoto etc... So usb
> > works a bit?
> > Kernel is 2.6.25-gentoo-r7. I am not sure, how to config the kernel for
> > usb.
> >
> > best regards
> > uwe
> >
> >
> >
> > Am Mittwoch, den 17.09.2008, 09:11 +0200 schrieb Dennis Meulensteen:
> > > Op Tuesday 16 September 2008, schreef Uwe Haider:
> > >
> > > > Every hint or tip is very much appreciated - thanks a lot!
> > >
> > > I always use an external card reader myself. Never had any problems, doesn't
> > > drain the camera batteries and is lightning fast. That's what i would
> > > recommend.
> > >
> > > Dennis
> > >
> > > _______________________________________________
> > > Digikam-users mailing list
> > > [hidden email]
> > > https://mail.kde.org/mailman/listinfo/digikam-users

--
Mit freundlichen Grüßen

Uwe Haider
[hidden email]
http://www.familie-haider.de

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users