Olympus Camedia C-480 Zoom camera and Digikam 0.9.2-final

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Olympus Camedia C-480 Zoom camera and Digikam 0.9.2-final

Wolfgang Pfeiffer
Chandra, Markus: Hi All

First let's hope all addresses I use for this email are the correct
ones. Sorry if not.

I can confirm the solution mentioned by Chandra to comment out
lines like so:

#ATTRS{idVendor}=="07b4", ATTRS{idProduct}=="0109", MODE="0664", GROUP="plugdev

The line above (about 4 or 5 instances of it, IINM .. :) is here, on a
relatively fresh Debian/unstable in:
/etc/udev/libgphoto2.rules

There's also a link to that file:

$ ls -l  /etc/udev/rules.d/025_libgphoto2.rules
lrwxrwxrwx 1 root root 19 Apr  7  2006 /etc/udev/rules.d/025_libgphoto2.rules -> ../libgphoto2.rules

The camera here is an Olympus C370Z.

Before that solution, /dev/sda1, which is the xd picture card in
the device, could not be started/attached to the system since quite a
few days in KDE. sda1 *could* be seen in FVWM tho', IIRC ...  and I'm
not sure whether FVWM uses the triggers in /etc/udev.d/ ...

I'm not sure, but i think the camera was much easier attached to the
computer, in KDE, many months ago (i.e. a year ago, or so?) when being
plugged in - without rewriting /etc/udev/libgphoto2.rules.

The computer is a Powerbook5,8 (aka alubook5,8)

The system here, as already mentioned, is Debian/unstable, last full
software update for most packages was done today.

KDE version: Release 3.5.9
udev: 114, as it seems
Kernel: 2.6.26-rc5

Thanks a lot to Markus Meissner and Chandra Chandrasekhar: Good work,
fine solution.

Please let me know if you need more information.

Best Regards
Wolfgang

Oh, nearly forgot it: I'm not subscribed to [hidden email].
--
http://heelsbroke.blogspot.com/
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users
Reply | Threaded
Open this post in threaded view
|

Re: Olympus Camedia C-480 Zoom camera and Digikam 0.9.2-final

Marcus Meissner
On Sun, Jun 08, 2008 at 11:16:15PM +0200, Wolfgang Pfeiffer wrote:

> Chandra, Markus: Hi All
>
> First let's hope all addresses I use for this email are the correct
> ones. Sorry if not.
>
> I can confirm the solution mentioned by Chandra to comment out
> lines like so:
>
> #ATTRS{idVendor}=="07b4", ATTRS{idProduct}=="0109", MODE="0664", GROUP="plugdev
>
> The line above (about 4 or 5 instances of it, IINM .. :) is here, on a
> relatively fresh Debian/unstable in:
> /etc/udev/libgphoto2.rules
>
> There's also a link to that file:
>
> $ ls -l  /etc/udev/rules.d/025_libgphoto2.rules
> lrwxrwxrwx 1 root root 19 Apr  7  2006 /etc/udev/rules.d/025_libgphoto2.rules -> ../libgphoto2.rules
>
> The camera here is an Olympus C370Z.
>
> Before that solution, /dev/sda1, which is the xd picture card in
> the device, could not be started/attached to the system since quite a
> few days in KDE. sda1 *could* be seen in FVWM tho', IIRC ...  and I'm
> not sure whether FVWM uses the triggers in /etc/udev.d/ ...
>
> I'm not sure, but i think the camera was much easier attached to the
> computer, in KDE, many months ago (i.e. a year ago, or so?) when being
> plugged in - without rewriting /etc/udev/libgphoto2.rules.
>
> The computer is a Powerbook5,8 (aka alubook5,8)
>
> The system here, as already mentioned, is Debian/unstable, last full
> software update for most packages was done today.
>
> KDE version: Release 3.5.9
> udev: 114, as it seems
> Kernel: 2.6.26-rc5
>
> Thanks a lot to Markus Meissner and Chandra Chandrasekhar: Good work,
> fine solution.
>
> Please let me know if you need more information.

Using libgphoto2 2.4.1 this would not be a problem, the ID
is not generated there anymore.

Ciao, Marcus
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users
Reply | Threaded
Open this post in threaded view
|

Re: Olympus Camedia C-480 Zoom camera and Digikam 0.9.2-final

Wolfgang Pfeiffer
Hi Marcus

On Sun, Jun 08 2008, at 23:25 +0200, Marcus Meissner wrote:

> Using libgphoto2 2.4.1 this would not be a problem, the ID
> is not generated there anymore.

Debian unstable here:

$ apt-cache policy libgphoto2-2
libgphoto2-2:
  Installed: 2.4.0-9
  Candidate: 2.4.0-9

Looks like I'll have to wait a bit until this version is available on
Debian .. :)

Thanks for your fast response.

Best Regards
Wolfgang
--
http://heelsbroke.blogspot.com/
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users