Hello,
My old CRT is failing :( Time to buy new monitor. What LCD you use and could recommend? Unfortunately I have rather limited resources. Cheap 19" PVA (some BenQ model) is top possibility. Are TN models really so bad for colors? TIA m. _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
At home and in my office i'm using a LG flatron 15S (19''). It's not expensive...
In my office, this flat screen is now a standard. We have built around 50 flat screens to change old CRT (scientific job : matlab with complex graph etc...) All is perfect. The screen is given with a CD including ICC profiles witch are compatible with digiKam. Photo color are perfect for me. Note : I have never tested a calib. screen device to compute real ICC profile. Perhaps later... Gilles 2007/4/11, Mikolaj Machowski <[hidden email]>: Hello, _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
On Wed, 11 Apr 2007, Gilles Caulier wrote:
[...] > The screen is given with a CD including ICC profiles witch are compatible > with digiKam. Photo color are perfect for me. Hmm, but if one changes brightness etc., doesn't this mean one gets maybe a different gamma? (this question might just show off my non-knowledge on ICC profiles and monitor calibration ...) > Note : I have never tested a calib. screen device to compute real ICC > profile. Perhaps later... The problem is that none of the cheaper calibrators is supported under linux (the spyder hack reverse engineering effort did not yet succeed: http://yan-ke.com/spyder/) Only Xrite DTP-94 and Xrite DTP-92 together with the Argyll Color Management System seem to provide a 100% linux solution... It seems that currently ``many`` people calibrate under Windows (on a dual-boot machine) and use the profile under linux, http://en.wikipedia.org/wiki/Linux_color_management Best, Arnd _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
In reply to this post by Gilles Caulier-4
I think the problem with the "cheap" LCDs is that the color of the
picture showed on the LCD changes with the angle from where you watch the screen. If you move your head up-down, left-right you will see that the color is not "constant". Of course I think for most of the people it is not a problem. But when you want to work with your photos a bit more professional way (either because it is required, or just your level of standard is higher) this "effect" is not really desirable. I am still using my Eizo CRT, and the next LCD I would buy is the Eizo ColorEdge CG19. But unfortunately that is not the cheap category (more than 1000 euro). Regards, Gabor Gilles Caulier wrote: > At home and in my office i'm using a LG flatron 15S (19''). It's not > expensive... > > In my office, this flat screen is now a standard. We have built around > 50 flat screens to change old CRT (scientific job : matlab with > complex graph etc...) All is perfect. > > The screen is given with a CD including ICC profiles witch are > compatible with digiKam. Photo color are perfect for me. > > Note : I have never tested a calib. screen device to compute real ICC > profile. Perhaps later... > > Gilles > > 2007/4/11, Mikolaj Machowski <[hidden email] <mailto:[hidden email]>>: > > Hello, > > My old CRT is failing :( > > Time to buy new monitor. > > What LCD you use and could recommend? > > Unfortunately I have rather limited resources. Cheap 19" PVA (some > BenQ > model) is top possibility. Are TN models really so bad for colors? > > TIA > > m. > > _______________________________________________ > Digikam-users mailing list > [hidden email] <mailto:[hidden email]> > https://mail.kde.org/mailman/listinfo/digikam-users > > > ------------------------------------------------------------------------ > > _______________________________________________ > Digikam-users mailing list > [hidden email] > https://mail.kde.org/mailman/listinfo/digikam-users > _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
In reply to this post by Bugzilla from mikmach@wp.pl
Am Wednesday 11 April 2007 schrieb Mikolaj Machowski:
> Hello, > > My old CRT is failing :( > > Time to buy new monitor. > > What LCD you use and could recommend? > > Unfortunately I have rather limited resources. Cheap 19" PVA (some BenQ > model) is top possibility. Are TN models really so bad for colors? > > TIA screens (we need no speed and no wrong contrast, no lateral angle, but we need large gamut, good vertical angle, color temperature, gamma, uniformity over screen). In the affordable range there's Samsung Syncmaster 205BW 1680*1050 that can be had for 230Euros. Next best is ViewSonic VG1930wm and Eizo Flexscan 1901, all at about the same price tag. Personally I have a Belinea 1020, 20" 1600*1200, and I'm very happy with it. But before summer I will switch for a 30" cinerama model, and for someone like you I would sell it really low price (but the postage could be expensive?) Gerhard -- Hakuna matata http://www.gerhard.fr _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users attachment0 (196 bytes) Download Attachment |
Dnia piątek 13 kwiecień 2007, Gerhard Kulzer napisał:
> In the affordable range there's Samsung Syncmaster 205BW 1680*1050 that > can be had for 230Euros. Next best is ViewSonic VG1930wm and Eizo > Flexscan 1901, all at about the same price tag. Thanks. Interesting (and heartening) results. All are on TN matrix which means it is not so bad as some say. > > Personally I have a Belinea 1020, 20" 1600*1200, and I'm very happy with > it. But before summer I will switch for a 30" cinerama model, and for > someone like you I would sell it really low price (but the postage could > be expensive?) Prohibitive. Thanks to all and I hope this slightly off-topic thread will help others :) m. _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
On 14/04/07, Mikolaj Machowski <[hidden email]> wrote:
> Dnia piątek 13 kwiecień 2007, Gerhard Kulzer napisał: > > In the affordable range there's Samsung Syncmaster 205BW 1680*1050 that > > can be had for 230Euros. Next best is ViewSonic VG1930wm and Eizo > > Flexscan 1901, all at about the same price tag. > > Thanks. Interesting (and heartening) results. All are on TN matrix which > means it is not so bad as some say. > > > > Personally I have a Belinea 1020, 20" 1600*1200, and I'm very happy with > > it. But before summer I will switch for a 30" cinerama model, and for > > someone like you I would sell it really low price (but the postage could > > be expensive?) > > Prohibitive. > > Thanks to all and I hope this slightly off-topic thread will help others > :) > > m. > I took a USB drive with some photos to Bug, a local computer chain. The only CRT they had, a Viewpro 20" made much better pictures than even their most expensive LCD. That convinced me: I'll save some money and trade desktop space for a CRT when I next buy. The current LCD's are good compared to the old, but CRT's are still much better for photos. Note, for reading text I do prefer my laptops LCD to the desktop's CRT. But for photos it won't do. Dotan Cohen http://chat-message-boards.com http://what-is-what.com/what_is/computer.html _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
On Montag, 16. April 2007, Dotan Cohen wrote:
> I took a USB drive with some photos to Bug, a local computer chain. > The only CRT they had, a Viewpro 20" made much better pictures than > even their most expensive LCD. That convinced me: I'll save some money > and trade desktop space for a CRT when I next buy. The current LCD's > are good compared to the old, but CRT's are still much better for > photos. > > Note, for reading text I do prefer my laptops LCD to the desktop's > CRT. But for photos it won't do. > > Dotan Cohen This is somehow true and somehow not... There are quite cheap CRTs giving good color quality, but there are also CRTs showing such disgusting results that even the cheapest LCD is better. On the other hand there are LCDs having such a restricted viewing angle that you would have to fix your head with screws to always look on the screen from the exact same angle... There are now professional high-end LCDs available that can be calibrated perfectly, but they are at the same prices as the CRTs were, when there still were CRTs :-) (3-5000 Swiss Francs... look here http://www.lb-ag.ch/news/digital/Quato/ip230E/index.html ) If you don't want (or like me: can't) afford such a piece of excellence you must simply go and look at the available monitors. Take a CD with you with a color chart and a photo you know how it should look and let the seller display it. Move it to all the edges and positions of the screen (you will wonder how much difference there can be depending on the position on the screen...). Try it with different ambient light (in different shops...). I think technology goes on so very fast and brands change their suppliers (where they buy the LCD or CRT etc.) so often that in the "economy class" you can't rely on infos that are not absolutely up-to-date (if monitor A was ways better than monitor B 3 month ago, it can absolutely be vice-versa right now and change to the contrary in short again...). As you will have to look at your screen (hopefully) for years, I think its worthwhile to take your time and look around personally and carefully... Good luck! Daniel -- Daniel Bauer photographer Basel Switzerland professional photography: http://www.daniel-bauer.com Madagascar special: http://www.sanic.ch _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
2007/4/16, Daniel Bauer <[hidden email]>: On Montag, 16. April 2007, Dotan Cohen wrote: Remember than CRT will be an obsolete technology in a near future. All screens production will be remplaced by LCD. The problem of screen with photo is to have the most large gamut to render properlly all colors from images. Its exactly the same problem with TV LCD screen. With some movies, you can see than the high color are overburned. This give a poor color quality rendering. The next generation of LCD will provide better gamut than current LCD. Promise technology are LED-LCD for example (named SED in the past by Sony, now renamed FED). http://www.computerpoweruser.com/articles/archive/c0505/26c05/26c05.pdf The advantage of computer between TV stuff is to have Color Management rule to adapt automaticly the image color to the screen gamut. If you want the better render of colors on your screen, calibrate your screen under Win32, get the ICC color profile generated, and set digiKam to use it like Monitor color profile in Color Management setup. Of course, you need to buy a color calibration device for that. Gilles _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
In reply to this post by Daniel Bauer-2
Daniel Bauer wrote:
> There are now professional high-end LCDs available that can be calibrated > perfectly, but they are at the same prices as the CRTs were, when there still > were CRTs :-) the fact is nobody want any more CRT, but the ggod thing is that excellent (professional) CRT are now very cheap, second hand :-). My Sony 20SFII was 80 euros one year ago, probably less now, and it's _very_ good jdd -- http://www.dodin.net Lucien Dodin, inventeur http://lucien.dodin.net/index.shtml _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
In reply to this post by Gilles Caulier-4
Does this really work? I have never tried it because I figured that
there would be too many differences from one OS to the next. Say you get the ICC profile under Windows. You now boot Linux and try to use that profile. The way an image is displayed could be very different. You are using video drivers that probably are made for a different OS and may not even be from the video card's manufacturer. Additionally, the differing drivers may have different default parameters for display properties. As I said, I have never tried this method. If anyone has had good luck, I'd love to hear about it! :-) Paul Gilles Caulier wrote: > If you want the better render of colors on your screen, calibrate your > screen under Win32, get the ICC color profile generated, and set > digiKam to use it like Monitor color profile in Color Management > setup. Of course, you need to buy a color calibration device for that. > > Gilles _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
On Mon, 16 Apr 2007, Paul Waldo wrote: > Does this really work? I have never tried it because I figured that > there would be too many differences from one OS to the next. Say you > get the ICC profile under Windows. You now boot Linux and try to use > that profile. The way an image is displayed could be very different. > You are using video drivers that probably are made for a different OS > and may not even be from the video card's manufacturer. Additionally, > the differing drivers may have different default parameters for display > properties. > > As I said, I have never tried this method. If anyone has had good luck, > I'd love to hear about it! :-) It seems people use it (I haven't ...), see http://en.wikipedia.org/wiki/Linux_color_management Another option is to hope for the spyder hack, http://yan-ke.com/spyder/, to succeed in providing linux support. Best, Arnd _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
Hi all,
As I said, I have never tried this method. If anyone has had good luck, I'd love to hear about it! :-)It seems people use it (I haven't ...), see http://en.wikipedia.org/wiki/Linux_color_management Another option is to hope for the spyder hack, http://yan-ke.com/spyder/, to succeed in providing linux support. I did it and works great. Did a couple of measurements back then, see the figures by yourself: http://linux.vilars.com/dotclear/index.php?2006/10/21/4-are-loaded-profile-under-linux-as-accurate-as-in-windows _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
In reply to this post by Gilles Caulier-4
Am Monday 16 April 2007 schrieb Gilles Caulier:
> > Remember than CRT will be an obsolete technology in a near future. All > screens production will be remplaced by LCD. > > The problem of screen with photo is to have the most large gamut to render > properlly all colors from images. Its exactly the same problem with TV LCD > screen. With some movies, you can see than the high color are overburned. > This give a poor color quality rendering. > > The next generation of LCD will provide better gamut than current LCD. > Promise technology are LED-LCD for example (named SED in the past by Sony, > now renamed FED). > > http://www.computerpoweruser.com/articles/archive/c0505/26c05/26c05.pdf > > The advantage of computer between TV stuff is to have Color Management rule > to adapt automaticly the image color to the screen gamut. > > If you want the better render of colors on your screen, calibrate your > screen under Win32, get the ICC color profile generated, and set digiKam to > use it like Monitor color profile in Color Management setup. Of course, you > need to buy a color calibration device for that. > > Gilles magazine Nr.292. They cover everything in Colormanagement, LCD testing for photographers, and selling pictures in France in the right portion of black and white (not colors) money without being caught ;-) Cheap calibration devices are Huey <90Euro and Spyder2express <100Euro Gerhard -- Hakuna matata http://www.gerhard.fr _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users attachment0 (196 bytes) Download Attachment |
In reply to this post by Daniel Bauer-2
Dnia poniedziałek 16 kwiecień 2007, Daniel Bauer napisał:
> I think technology goes on so very fast and brands change their > suppliers (where they buy the LCD or CRT etc.) so often that in the > "economy class" you can't rely on infos that are not absolutely > up-to-date (if monitor A was ways better than monitor B 3 month ago, it > can absolutely be vice-versa right now and change to the contrary in > short again...). Especially as some producers are waiting few months to get good reviews and are placing worse matrices in the same model. m. _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
On 16/04/07, Mikolaj Machowski <[hidden email]> wrote:
> Dnia poniedziałek 16 kwiecień 2007, Daniel Bauer napisał: > > I think technology goes on so very fast and brands change their > > suppliers (where they buy the LCD or CRT etc.) so often that in the > > "economy class" you can't rely on infos that are not absolutely > > up-to-date (if monitor A was ways better than monitor B 3 month ago, it > > can absolutely be vice-versa right now and change to the contrary in > > short again...). > > Especially as some producers are waiting few months to get good reviews > and are placing worse matrices in the same model. > Nothing like a good conspiracy theory! Dotan Cohen http://lyricslist.com/ http://what-is-what.com/ _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
Dnia poniedziałek 16 kwiecień 2007, Dotan Cohen napisał:
> On 16/04/07, Mikolaj Machowski <[hidden email]> wrote: > > Dnia poniedziałek 16 kwiecień 2007, Daniel Bauer napisał: > > > I think technology goes on so very fast and brands change their > > > suppliers (where they buy the LCD or CRT etc.) so often that in the > > > "economy class" you can't rely on infos that are not absolutely > > > up-to-date (if monitor A was ways better than monitor B 3 month ago, > > > it can absolutely be vice-versa right now and change to the contrary > > > in short again...). > > > > Especially as some producers are waiting few months to get good > > reviews and are placing worse matrices in the same model. > > Nothing like a good conspiracy theory! Check history of Fujitsu Siemens P19-2. m. _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
In reply to this post by Dotan Cohen
>From: "Dotan Cohen" <[hidden email]>
>Reply-To: digiKam - Digital Photo Management for the masses ><[hidden email]> >To: "digiKam - Digital Photo Management for the masses" ><[hidden email]> >Subject: Re: [Digikam-users] LCD for photos >Date: Mon, 16 Apr 2007 17:53:31 +0200 > >On 16/04/07, Mikolaj Machowski <[hidden email]> wrote: [...] > > Especially as some producers are waiting few months to get good reviews > > and are placing worse matrices in the same model. > > > >Nothing like a good conspiracy theory! > >Dotan Cohen unfortunately, true. Dell 2407WFP. _________________________________________________________________ Get the Kung Fu Bunny Theme pack free! http://www.imagine-windowslive.com/Themes/Messenger/Reward/Default.aspx?Locale=en-CA# _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
Free forum by Nabble | Edit this page |