Fwd: No Photos in Import Dialog

[Axel Klein]

Hi *,

I am runnung digikam 4.0.0 on Ubuntu trusty thar.
I installed it from msylwester's ppa although I had a version 3.5.0
installed previously that I compiled by myself which I deleted.

When I want to import photos from my Canon 500D that is connected by
USB, I don't see any picture in the import dialog and below I read the
message:
'Fehler beim Verbinden mit der Kamera. Bitte überprüfen Sie, ob die
Kamera korrekt angeschlossen und eingeschaltet ist.'

On the command line I read the following:
snip--
digikam(30733)/digikam (core) Digikam::DigikamApp::checkSolidCamera:
Solid returns unsupported driver handle for gphoto2
digikam(30733)/digikam (core) Digikam::ImportStackedView::syncSelection:
one or both of the models are null?! from:
Digikam::ImportIconView(0x5be1230) to:
Digikam::ImportThumbnailBar(0x6212df0)
QObject::connect: Cannot connect
(null)::signalThumbInfo(QString,QString,CamItemInfo,QImage) to
Digikam::MapViewModelHelper::slotThumbnailLoaded(QString,QString,CamItemInfo,QImage)
digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
could be retrieved for url KUrl("")
digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
could be retrieved for url KUrl("")
digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
could be retrieved for url KUrl("")
digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
could be retrieved for url KUrl("")
void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
QMenu*, int, int, const QStringList&): No id for action
void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
QMenu*, int, int, const QStringList&): No id for action
--snip

I have set-up the camera in the settings both as Canon 500D and as
'Automatische Erkennung' - no success, always the same error.

With nemo or nautilus the camera is shown as:
gphoto2://[usb:002,007]/
and I have access to all files.

The same happens when I connect my Motorola G to the computer.

Thank you in advance for your help.
Best regards
Axel


_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Anders Lund]

This was actually finally fixed in one of the most recent 3.x versions, and the
fix was lost with 4.0. Also hits my canon cameras. :\

On Tirsdag den 10. juni 2014 11:37:38, Axel Klein wrote:

> Hi *,
>
> I am runnung digikam 4.0.0 on Ubuntu trusty thar.
> I installed it from msylwester's ppa although I had a version 3.5.0
> installed previously that I compiled by myself which I deleted.
>
> When I want to import photos from my Canon 500D that is connected by
> USB, I don't see any picture in the import dialog and below I read the
> message:
> 'Fehler beim Verbinden mit der Kamera. Bitte überprüfen Sie, ob die
> Kamera korrekt angeschlossen und eingeschaltet ist.'
>
> On the command line I read the following:
> snip--
> digikam(30733)/digikam (core) Digikam::DigikamApp::checkSolidCamera:
> Solid returns unsupported driver handle for gphoto2
> digikam(30733)/digikam (core) Digikam::ImportStackedView::syncSelection:
> one or both of the models are null?! from:
> Digikam::ImportIconView(0x5be1230) to:
> Digikam::ImportThumbnailBar(0x6212df0)
> QObject::connect: Cannot connect
> (null)::signalThumbInfo(QString,QString,CamItemInfo,QImage) to
> Digikam::MapViewModelHelper::slotThumbnailLoaded(QString,QString,CamItemInfo
> ,QImage) digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No
> location could be retrieved for url KUrl("")
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
> QMenu*, int, int, const QStringList&): No id for action
> void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
> QMenu*, int, int, const QStringList&): No id for action
> --snip
>
> I have set-up the camera in the settings both as Canon 500D and as
> 'Automatische Erkennung' - no success, always the same error.
>
> With nemo or nautilus the camera is shown as:
> gphoto2://[usb:002,007]/
> and I have access to all files.
>
> The same happens when I connect my Motorola G to the computer.
>
> Thank you in advance for your help.
> Best regards
> Axel
>
>
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users

--
Anders
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Robert Zeller]

I had a similar problem long time ago. After I had discovered that
nautilus was occupying the USB-port I killed the nautilus process and
the problem disappeared.

On 06/10/2014 11:37 AM, Axel Klein wrote:

> Hi *,
>
> I am runnung digikam 4.0.0 on Ubuntu trusty thar.
> I installed it from msylwester's ppa although I had a version 3.5.0
> installed previously that I compiled by myself which I deleted.
>
> When I want to import photos from my Canon 500D that is connected by
> USB, I don't see any picture in the import dialog and below I read the
> message:
> 'Fehler beim Verbinden mit der Kamera. Bitte überprüfen Sie, ob die
> Kamera korrekt angeschlossen und eingeschaltet ist.'
>
> On the command line I read the following:
> snip--
> digikam(30733)/digikam (core) Digikam::DigikamApp::checkSolidCamera:
> Solid returns unsupported driver handle for gphoto2
> digikam(30733)/digikam (core) Digikam::ImportStackedView::syncSelection:
> one or both of the models are null?! from:
> Digikam::ImportIconView(0x5be1230) to:
> Digikam::ImportThumbnailBar(0x6212df0)
> QObject::connect: Cannot connect
> (null)::signalThumbInfo(QString,QString,CamItemInfo,QImage) to
> Digikam::MapViewModelHelper::slotThumbnailLoaded(QString,QString,CamItemInfo,QImage)
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> could be retrieved for url KUrl("")
> void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
> QMenu*, int, int, const QStringList&): No id for action
> void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
> QMenu*, int, int, const QStringList&): No id for action
> --snip
>
> I have set-up the camera in the settings both as Canon 500D and as
> 'Automatische Erkennung' - no success, always the same error.
>
> With nemo or nautilus the camera is shown as:
> gphoto2://[usb:002,007]/
> and I have access to all files.
>
> The same happens when I connect my Motorola G to the computer.
>
> Thank you in advance for your help.
> Best regards
> Axel
>
>
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users
>

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Anders Lund]

AndersOn Tirsdag den 10. juni 2014 11:46:55,  Lund wrote:
> This was actually finally fixed in one of the most recent 3.x versions, and
> the fix was lost with 4.0. Also hits my canon cameras. :\

Sorry, wrong - all I am missing are the previews :)

> On Tirsdag den 10. juni 2014 11:37:38, Axel Klein wrote:
> > Hi *,
> >
> > I am runnung digikam 4.0.0 on Ubuntu trusty thar.
> > I installed it from msylwester's ppa although I had a version 3.5.0
> > installed previously that I compiled by myself which I deleted.
> >
> > When I want to import photos from my Canon 500D that is connected by
> > USB, I don't see any picture in the import dialog and below I read the
> > message:
> > 'Fehler beim Verbinden mit der Kamera. Bitte überprüfen Sie, ob die
> > Kamera korrekt angeschlossen und eingeschaltet ist.'
> >
> > On the command line I read the following:
> > snip--
> > digikam(30733)/digikam (core) Digikam::DigikamApp::checkSolidCamera:
> > Solid returns unsupported driver handle for gphoto2
> > digikam(30733)/digikam (core) Digikam::ImportStackedView::syncSelection:
> > one or both of the models are null?! from:
> > Digikam::ImportIconView(0x5be1230) to:
> > Digikam::ImportThumbnailBar(0x6212df0)
> > QObject::connect: Cannot connect
> > (null)::signalThumbInfo(QString,QString,CamItemInfo,QImage) to
> > Digikam::MapViewModelHelper::slotThumbnailLoaded(QString,QString,CamItemIn
> > fo ,QImage) digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo:
> > No location could be retrieved for url KUrl("")
> > digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> > could be retrieved for url KUrl("")
> > digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> > could be retrieved for url KUrl("")
> > digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location
> > could be retrieved for url KUrl("")
> > void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
> > QMenu*, int, int, const QStringList&): No id for action
> > void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,
> > QMenu*, int, int, const QStringList&): No id for action
> > --snip
> >
> > I have set-up the camera in the settings both as Canon 500D and as
> > 'Automatische Erkennung' - no success, always the same error.
> >
> > With nemo or nautilus the camera is shown as:
> > gphoto2://[usb:002,007]/
> > and I have access to all files.
> >
> > The same happens when I connect my Motorola G to the computer.
> >
> > Thank you in advance for your help.
> > Best regards
> > Axel
> >
> >
> > _______________________________________________
> > Digikam-users mailing list
> > [hidden email]
> > https://mail.kde.org/mailman/listinfo/digikam-users

--
Anders
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Paulux]

Hi !

 

I've the same problem since DK 4.0.0, with my canon 60D. All the previews are missing in the download dialog.

 

Don't understand why.

 

Paulux

 

 

Le mardi 10 juin 2014, 12:25:08 Anders Lund a écrit :

> AndersOn Tirsdag den 10. juni 2014 11:46:55, Lund wrote:

> > This was actually finally fixed in one of the most recent 3.x versions, and

> > the fix was lost with 4.0. Also hits my canon cameras. :\

>

> Sorry, wrong - all I am missing are the previews :)

>

> > On Tirsdag den 10. juni 2014 11:37:38, Axel Klein wrote:

> > > Hi *,

> > >

> > > I am runnung digikam 4.0.0 on Ubuntu trusty thar.

> > > I installed it from msylwester's ppa although I had a version 3.5.0

> > > installed previously that I compiled by myself which I deleted.

> > >

> > > When I want to import photos from my Canon 500D that is connected by

> > > USB, I don't see any picture in the import dialog and below I read the

> > > message:

> > > 'Fehler beim Verbinden mit der Kamera. Bitte überprüfen Sie, ob die

> > > Kamera korrekt angeschlossen und eingeschaltet ist.'

> > >

> > > On the command line I read the following:

> > > snip--

> > > digikam(30733)/digikam (core) Digikam::DigikamApp::checkSolidCamera:

> > > Solid returns unsupported driver handle for gphoto2

> > > digikam(30733)/digikam (core) Digikam::ImportStackedView::syncSelection:

> > > one or both of the models are null?! from:

> > > Digikam::ImportIconView(0x5be1230) to:

> > > Digikam::ImportThumbnailBar(0x6212df0)

> > > QObject::connect: Cannot connect

> > > (null)::signalThumbInfo(QString,QString,CamItemInfo,QImage) to

> > > Digikam::MapViewModelHelper::slotThumbnailLoaded(QString,QString,CamItemIn

> > > fo ,QImage) digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo:

> > > No location could be retrieved for url KUrl("")

> > > digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location

> > > could be retrieved for url KUrl("")

> > > digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location

> > > could be retrieved for url KUrl("")

> > > digikam(30733)/digikam (core) Digikam::ImageInfo::ImageInfo: No location

> > > could be retrieved for url KUrl("")

> > > void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,

> > > QMenu*, int, int, const QStringList&): No id for action

> > > void DBusMenuExporterPrivate::fillLayoutItem(DBusMenuLayoutItem*,

> > > QMenu*, int, int, const QStringList&): No id for action

> > > --snip

> > >

> > > I have set-up the camera in the settings both as Canon 500D and as

> > > 'Automatische Erkennung' - no success, always the same error.

> > >

> > > With nemo or nautilus the camera is shown as:

> > > gphoto2://[usb:002,007]/

> > > and I have access to all files.

> > >

> > > The same happens when I connect my Motorola G to the computer.

> > >

> > > Thank you in advance for your help.

> > > Best regards

> > > Axel

> > >

> > >

> > > _______________________________________________

> > > Digikam-users mailing list

> > > [hidden email]

> > > https://mail.kde.org/mailman/listinfo/digikam-users

>

>

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users