[digiKam-users] digikam 6.0.0-git reading metadata from MP4 issues
Locked
[digiKam-users] digikam 6.0.0-git reading metadata from MP4 issues
 
|
Hello, I can't make the yesterday's appimage read metadata from this file: However, this file being read just fine (GPS location, dimensions, etc. show up): Both videos taken by the same camera and compressed by the same ffmpeg script. The only difference between them is that the first one I tagged, rated, etc. in digikam 5.9.0. first and then opened in 6.0.0 and re-read metadata from file. The second one I did not do anything in 5.9.0 and opened in 6.0.0 right away. Do you know what might cause that issue? Best regards, Andrey |
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
Hi, In 5.9.0, i suppose that XMP side car are generated to tag video, and this will include the date inside. Right ? Best Gilles Caulier 2018-06-06 16:07 GMT+02:00 Andrey Goreev <[hidden email]>:
|
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
I haven't checked if XMP sidecar was actually created but yes it should be there. Sent from my Samsung Galaxy smartphone. -------- Original message -------- From: Gilles Caulier <[hidden email]> Date: 2018-06-06 8:56 AM (GMT-07:00) To: digiKam - Home Manage your photographs as a professional with the power of open source <[hidden email]> Subject: Re: [digiKam-users] digikam 6.0.0-git reading metadata from MP4 issues Hi, In 5.9.0, i suppose that XMP side car are generated to tag video, and this will include the date inside. Right ? Best Gilles Caulier 2018-06-06 16:07 GMT+02:00 Andrey Goreev <[hidden email]>:
|
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
Yes, XMP sidecar was there. I removed it and digikam read metadata properly after that. Is that expected behavior ? Best regards, On Wed, Jun 6, 2018 at 10:21 AM, Andrey Goreev <[hidden email]> wrote:
|
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
Which sidecar settings did you set exactly?
Maik Am Mittwoch, 6. Juni 2018, 22:36:30 CEST schrieb Andrey Goreev: > Yes, XMP sidecar was there. I removed it and digikam read metadata properly > after that. > Is that expected behavior ? > > Best regards, > > On Wed, Jun 6, 2018 at 10:21 AM, Andrey Goreev <[hidden email]> wrote: > > I haven't checked if XMP sidecar was actually created but yes it should be > > there. > > > > > > > > Sent from my Samsung Galaxy smartphone. > > > > -------- Original message -------- > > From: Gilles Caulier <[hidden email]> > > Date: 2018-06-06 8:56 AM (GMT-07:00) > > To: digiKam - Home Manage your photographs as a professional with the > > power of open source <[hidden email]> > > Subject: Re: [digiKam-users] digikam 6.0.0-git reading metadata from MP4 > > issues > > > > Hi, > > > > In 5.9.0, i suppose that XMP side car are generated to tag video, and this > > will include the date inside. Right ? > > > > Best > > > > Gilles Caulier > > > > 2018-06-06 16:07 GMT+02:00 Andrey Goreev <[hidden email]>: > >> Hello, > >> > >> I can't make the yesterday's appimage read metadata from this file: > >> https://drive.google.com/open?id=1tRqd0hspDm74naVv1Emc_ZS7SaoObptP > >> > >> However, this file being read just fine (GPS location, dimensions, etc. > >> show up): > >> https://drive.google.com/open?id=18gnuIuTkh39Kcoxrat2j5vd3SLj83c3k > >> > >> Both videos taken by the same camera and compressed by the same ffmpeg > >> script. > >> > >> The only difference between them is that the first one I tagged, rated, > >> etc. in digikam 5.9.0. first and then opened in 6.0.0 and re-read > >> metadata > >> from file. The second one I did not do anything in 5.9.0 and opened in > >> 6.0.0 right away. > >> > >> Do you know what might cause that issue? > >> > >> Best regards, > >> Andrey |
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
[x] read form sidecars [x] write to sidecars write to XMP sidecar for read-only item only Best regards, On Wed, Jun 6, 2018 at 2:49 PM, Maik Qualmann <[hidden email]> wrote: Which sidecar settings did you set exactly? |
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
> [x] read form sidecars
Yes that's it, if a sidecar is present, this one will be used. Maik Am Mittwoch, 6. Juni 2018, 22:51:31 CEST schrieb Andrey Goreev: > [x] read form sidecars > [x] write to sidecars > > write to XMP sidecar for read-only item only > > Best regards, > > On Wed, Jun 6, 2018 at 2:49 PM, Maik Qualmann <[hidden email]> wrote: > > Which sidecar settings did you set exactly? > > > > Maik > > > > Am Mittwoch, 6. Juni 2018, 22:36:30 CEST schrieb Andrey Goreev: > > > Yes, XMP sidecar was there. I removed it and digikam read metadata > > > > properly > > > > > after that. > > > Is that expected behavior ? > > > > > > Best regards, > > > > > > On Wed, Jun 6, 2018 at 10:21 AM, Andrey Goreev <[hidden email]> > > > > wrote: > > > > I haven't checked if XMP sidecar was actually created but yes it > > > > should be > > > > > > there. > > > > > > > > > > > > > > > > Sent from my Samsung Galaxy smartphone. > > > > > > > > -------- Original message -------- > > > > From: Gilles Caulier <[hidden email]> > > > > Date: 2018-06-06 8:56 AM (GMT-07:00) > > > > To: digiKam - Home Manage your photographs as a professional with the > > > > power of open source <[hidden email]> > > > > Subject: Re: [digiKam-users] digikam 6.0.0-git reading metadata from > > > > MP4 > > > > > > issues > > > > > > > > Hi, > > > > > > > > In 5.9.0, i suppose that XMP side car are generated to tag video, and > > > > this > > > > > > will include the date inside. Right ? > > > > > > > > Best > > > > > > > > Gilles Caulier > > > > > > > > 2018-06-06 16:07 GMT+02:00 Andrey Goreev <[hidden email]>: > > > >> Hello, > > > >> > > > >> I can't make the yesterday's appimage read metadata from this file: > > > >> https://drive.google.com/open?id=1tRqd0hspDm74naVv1Emc_ZS7SaoObptP > > > >> > > > >> However, this file being read just fine (GPS location, dimensions, > > > > etc. > > > > > >> show up): > > > >> https://drive.google.com/open?id=18gnuIuTkh39Kcoxrat2j5vd3SLj83c3k > > > >> > > > >> Both videos taken by the same camera and compressed by the same > > > >> ffmpeg > > > >> script. > > > >> > > > >> The only difference between them is that the first one I tagged, > > > > rated, > > > > > >> etc. in digikam 5.9.0. first and then opened in 6.0.0 and re-read > > > >> metadata > > > >> from file. The second one I did not do anything in 5.9.0 and opened > > > >> in > > > >> 6.0.0 right away. > > > >> > > > >> Do you know what might cause that issue? > > > >> > > > >> Best regards, > > > >> Andrey |
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
So they are higher priority than embedded metadata? Best regards, On Wed, Jun 6, 2018 at 2:55 PM, Maik Qualmann <[hidden email]> wrote: > [x] read form sidecars |
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
Yes, if the option is activated, only the sidecar will read.
Maik Am Mittwoch, 6. Juni 2018, 22:58:39 CEST schrieb Andrey Goreev: > So they are higher priority than embedded metadata? > > Best regards, > > On Wed, Jun 6, 2018 at 2:55 PM, Maik Qualmann <[hidden email]> wrote: > > > [x] read form sidecars > > > > Yes that's it, if a sidecar is present, this one will be used. > > > > Maik > > > > Am Mittwoch, 6. Juni 2018, 22:51:31 CEST schrieb Andrey Goreev: > > > [x] read form sidecars > > > [x] write to sidecars > > > > > > write to XMP sidecar for read-only item only > > > > > > Best regards, > > > > > > On Wed, Jun 6, 2018 at 2:49 PM, Maik Qualmann <[hidden email]> > > > > wrote: > > > > Which sidecar settings did you set exactly? > > > > > > > > Maik > > > > > > > > Am Mittwoch, 6. Juni 2018, 22:36:30 CEST schrieb Andrey Goreev: > > > > > Yes, XMP sidecar was there. I removed it and digikam read metadata > > > > > > > > properly > > > > > > > > > after that. > > > > > Is that expected behavior ? > > > > > > > > > > Best regards, > > > > > > > > > > On Wed, Jun 6, 2018 at 10:21 AM, Andrey Goreev <[hidden email]> > > > > > > > > wrote: > > > > > > I haven't checked if XMP sidecar was actually created but yes it > > > > > > > > should be > > > > > > > > > > there. > > > > > > > > > > > > > > > > > > > > > > > > Sent from my Samsung Galaxy smartphone. > > > > > > > > > > > > -------- Original message -------- > > > > > > From: Gilles Caulier <[hidden email]> > > > > > > Date: 2018-06-06 8:56 AM (GMT-07:00) > > > > > > To: digiKam - Home Manage your photographs as a professional with > > > > the > > > > > > > > power of open source <[hidden email]> > > > > > > Subject: Re: [digiKam-users] digikam 6.0.0-git reading metadata > > > > from > > > > > > MP4 > > > > > > > > > > issues > > > > > > > > > > > > Hi, > > > > > > > > > > > > In 5.9.0, i suppose that XMP side car are generated to tag video, > > > > and > > > > > > this > > > > > > > > > > will include the date inside. Right ? > > > > > > > > > > > > Best > > > > > > > > > > > > Gilles Caulier > > > > > > > > > > > > 2018-06-06 16:07 GMT+02:00 Andrey Goreev <[hidden email]>: > > > > > >> Hello, > > > > > >> > > > > > >> I can't make the yesterday's appimage read metadata from this > > > > file: > > > > > >> https://drive.google.com/open?id=1tRqd0hspDm74naVv1Emc_ > > > > ZS7SaoObptP > > > > > > > >> However, this file being read just fine (GPS location, > > > > > >> dimensions, > > > > > > > > etc. > > > > > > > > > >> show up): > > > > > >> https://drive.google.com/open?id=18gnuIuTkh39Kcoxrat2j5vd3SLj83 > > > > c3k > > > > > > > >> Both videos taken by the same camera and compressed by the same > > > > > >> ffmpeg > > > > > >> script. > > > > > >> > > > > > >> The only difference between them is that the first one I tagged, > > > > > > > > rated, > > > > > > > > > >> etc. in digikam 5.9.0. first and then opened in 6.0.0 and re-read > > > > > >> metadata > > > > > >> from file. The second one I did not do anything in 5.9.0 and > > > > opened > > > > > > > >> in > > > > > >> 6.0.0 right away. > > > > > >> > > > > > >> Do you know what might cause that issue? > > > > > >> > > > > > >> Best regards, > > > > > >> Andrey |
Re: digikam 6.0.0-git reading metadata from MP4 issues
|
|
Thanks Maik I will add that comment to the handbook if you don't mind. Sent from my Samsung Galaxy smartphone. -------- Original message -------- From: Maik Qualmann <[hidden email]> Date: 2018-06-06 3:13 PM (GMT-07:00) To: [hidden email] Cc: Andrey Goreev <[hidden email]> Subject: Re: [digiKam-users] digikam 6.0.0-git reading metadata from MP4 issues Maik Am Mittwoch, 6. Juni 2018, 22:58:39 CEST schrieb Andrey Goreev: > So they are higher priority than embedded metadata? > > Best regards, > > On Wed, Jun 6, 2018 at 2:55 PM, Maik Qualmann <[hidden email]> wrote: > > > [x] read form sidecars > > > > Yes that's it, if a sidecar is present, this one will be used. > > > > Maik > > > > Am Mittwoch, 6. Juni 2018, 22:51:31 CEST schrieb Andrey Goreev: > > > [x] read form sidecars > > > [x] write to sidecars > > > > > > write to XMP sidecar for read-only item only > > > > > > Best regards, > > > > > > On Wed, Jun 6, 2018 at 2:49 PM, Maik Qualmann <[hidden email]> > > > > wrote: > > > > Which sidecar settings did you set exactly? > > > > > > > > Maik > > > > > > > > Am Mittwoch, 6. Juni 2018, 22:36:30 CEST schrieb Andrey Goreev: > > > > > Yes, XMP sidecar was there. I removed it and digikam read metadata > > > > > > > > properly > > > > > > > > > after that. > > > > > Is that expected behavior ? > > > > > > > > > > Best regards, > > > > > > > > > > On Wed, Jun 6, 2018 at 10:21 AM, Andrey Goreev <[hidden email]> > > > > > > > > wrote: > > > > > > I haven't checked if XMP sidecar was actually created but yes it > > > > > > > > should be > > > > > > > > > > there. > > > > > > > > > > > > > > > > > > > > > > > > Sent from my Samsung Galaxy smartphone. > > > > > > > > > > > > -------- Original message -------- > > > > > > From: Gilles Caulier <[hidden email]> > > > > > > Date: 2018-06-06 8:56 AM (GMT-07:00) > > > > > > To: digiKam - Home Manage your photographs as a professional with > > > > the > > > > > > > > power of open source <[hidden email]> > > > > > > Subject: Re: [digiKam-users] digikam 6.0.0-git reading metadata > > > > from > > > > > > MP4 > > > > > > > > > > issues > > > > > > > > > > > > Hi, > > > > > > > > > > > > In 5.9.0, i suppose that XMP side car are generated to tag video, > > > > and > > > > > > this > > > > > > > > > > will include the date inside. Right ? > > > > > > > > > > > > Best > > > > > > > > > > > > Gilles Caulier > > > > > > > > > > > > 2018-06-06 16:07 GMT+02:00 Andrey Goreev <[hidden email]>: > > > > > >> Hello, > > > > > >> > > > > > >> I can't make the yesterday's appimage read metadata from this > > > > file: > > > > > >> https://drive.google.com/open?id=1tRqd0hspDm74naVv1Emc_ > > > > ZS7SaoObptP > > > > > > > >> However, this file being read just fine (GPS location, > > > > > >> dimensions, > > > > > > > > etc. > > > > > > > > > >> show up): > > > > > >> https://drive.google.com/open?id=18gnuIuTkh39Kcoxrat2j5vd3SLj83 > > > > c3k > > > > > > > >> Both videos taken by the same camera and compressed by the same > > > > > >> ffmpeg > > > > > >> script. > > > > > >> > > > > > >> The only difference between them is that the first one I tagged, > > > > > > > > rated, > > > > > > > > > >> etc. in digikam 5.9.0. first and then opened in 6.0.0 and re-read > > > > > >> metadata > > > > > >> from file. The second one I did not do anything in 5.9.0 and > > > > opened > > > > > > > >> in > > > > > >> 6.0.0 right away. > > > > > >> > > > > > >> Do you know what might cause that issue? > > > > > >> > > > > > >> Best regards, > > > > > >> Andrey |
«
Return to digikam-users
|
1 view|%1 views
| Free forum by Nabble | Edit this page |