branches/extragear/kde3/graphics/digikam/utilities/imageeditor/rawimport

[Gilles Caulier-4]

SVN commit 845390 by cgilles:

Raw Import tool :
- Separate preview and settings implementation from dialog. In fact the dialog will deseapear and editor will support
a widget stack mechanism to display canvas view or tool preview. This will include all image plugins (but it's not yet done.)!
Note than the settings will be hosted by a new right sidebar tab which will be visible only when the tool running.
This moc-up is similar than Risto paper. I'm sure than Mik will be very impatient to test it (:=)))

-Add Lineary adjustmant using curve widget (as UFRAW).

Still Color management improvements to do to complete RAW Import tool. Please, let's me more free time...

CCMAIL: [hidden email]



 M  +2 -1      Makefile.am  
 M  +63 -440   rawimportdlg.cpp  
 M  +7 -2      rawimportdlg.h  
 M  +24 -31    rawpreview.cpp  
 M  +3 -4      rawpreview.h  
 AM            rawsettingsbox.cpp   [License: GPL (v2+)]
 AM            rawsettingsbox.h   [License: GPL (v2+)]


_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Monday 11 of August 2008, Gilles Caulier napisał:
> SVN commit 845390 by cgilles:
>
> Raw Import tool :
> - Separate preview and settings implementation from dialog. In fact the
> dialog will deseapear and editor will support a widget stack mechanism
> to display canvas view or tool preview. This will include all image
> plugins (but it's not yet done.)!

As I am writing this it looks like it is almost done. There are rough
edges but will not comment on that because don't know if this is on
"commentable" level or not.

> Note than the settings will be hosted
> by a new right sidebar tab which will be visible only when the tool
> running. This moc-up is similar than Risto paper. I'm sure than Mik will
> be very impatient to test it (:=)))

:)

> -Add Lineary adjustmant using curve widget (as UFRAW).

Doesn't work :( (svn 845503)
Widget is there, I can play with curve but without effects.

> Please, let's me more free time...

Sure, take your time :) You are doing excellent work.

Since RAW import dialog itself is almost complete I will allow myself
for some remarks ;)

- not clear way for zoom. Ctrl-MouseWheel works but definitely not
  enough - especially no way to set 1:1 zoom factor
- cannot abandon action and return to Album view, have to import with
  default settings and close editor window to return there; should be
  Cancel action which will return user directly to main window
- most RAW import tools I know use E.V. for exposure correction - 99% of
  users will expect that somewhere
- some way to save settings and use those profiles to import other
  photos?
- even when imported with 16-bit checkbox unchecked Properties in image
  editor shows that image as 48 bpp - but when saved as tiff (without
  any other settings changed) this is regular 24 bpp image. I understand
  this is because in IE this is still 48 bpp RAW image it will be only
  later exported with 24 bpp depth - but this is misleading.
- I have FujiCCD - when I select 'don't stretch or rotate pixels'
  preview is OK (rotated 45 degrees), but imported is rotated image.

m.

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

2008/8/11 Mikolaj Machowski <[hidden email]>:

> Dnia Monday 11 of August 2008, Gilles Caulier napisał:
>> SVN commit 845390 by cgilles:
>>
>> Raw Import tool :
>> - Separate preview and settings implementation from dialog. In fact the
>> dialog will deseapear and editor will support a widget stack mechanism
>> to display canvas view or tool preview. This will include all image
>> plugins (but it's not yet done.)!
>
> As I am writing this it looks like it is almost done. There are rough
> edges but will not comment on that because don't know if this is on
> "commentable" level or not.
>
>> Note than the settings will be hosted
>> by a new right sidebar tab which will be visible only when the tool
>> running. This moc-up is similar than Risto paper. I'm sure than Mik will
>> be very impatient to test it (:=)))
>
> :)
>
>> -Add Lineary adjustmant using curve widget (as UFRAW).
>
> Doesn't work :( (svn 845503)
> Widget is there, I can play with curve but without effects.

It take effect to press on preview for the moment.

>
>> Please, let's me more free time...
>
> Sure, take your time :) You are doing excellent work.
>
> Since RAW import dialog itself is almost complete I will allow myself
> for some remarks ;)
>
> - not clear way for zoom. Ctrl-MouseWheel works but definitely not
>  enough - especially no way to set 1:1 zoom factor

yes zoom/pan button are missing. When dialog will be removed, the
editor zooming buttons from toolbar will be used for that.

> - cannot abandon action and return to Album view, have to import with
>  default settings and close editor window to return there; should be
>  Cancel action which will return user directly to main window

yes. same problem here. when dialog will be removed, you just need to
close editore. that all.

> - most RAW import tools I know use E.V. for exposure correction - 99% of
>  users will expect that somewhere

well the unit is EV in current exposure settings. What that you need exactly ?

> - some way to save settings and use those profiles to import other
>  photos?

Ah. yes. it's in my todo list, but in the future with KDE4 only,
because i will use DB for that.

In KDE3, RAW import remember settings between sessions.

> - even when imported with 16-bit checkbox unchecked Properties in image
>  editor shows that image as 48 bpp - but when saved as tiff (without
>  any other settings changed) this is regular 24 bpp image. I understand
>  this is because in IE this is still 48 bpp RAW image it will be only
>  later exported with 24 bpp depth - but this is misleading.

No it's abnormal. i will try to reproduce here.

> - I have FujiCCD - when I select 'don't stretch or rotate pixels'
>  preview is OK (rotated 45 degrees), but imported is rotated image.

It's another problem. i will try to check it too...

If you can, please send me in private a RAW sample from you Fuji
camera. I have only one Fuji sample in my RAW repository.

Thanks for this report.

Gilles
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

2008/8/11 Mikolaj Machowski <[hidden email]>:

> Dnia Monday 11 of August 2008, Gilles Caulier napisał:
>> SVN commit 845390 by cgilles:
>>
>> Raw Import tool :
>> - Separate preview and settings implementation from dialog. In fact the
>> dialog will deseapear and editor will support a widget stack mechanism
>> to display canvas view or tool preview. This will include all image
>> plugins (but it's not yet done.)!
>
> As I am writing this it looks like it is almost done. There are rough
> edges but will not comment on that because don't know if this is on
> "commentable" level or not.
>
>> Note than the settings will be hosted
>> by a new right sidebar tab which will be visible only when the tool
>> running. This moc-up is similar than Risto paper. I'm sure than Mik will
>> be very impatient to test it (:=)))
>
> :)
>
>> -Add Lineary adjustmant using curve widget (as UFRAW).
>
> Doesn't work :( (svn 845503)
> Widget is there, I can play with curve but without effects.
>
>> Please, let's me more free time...
>
> Sure, take your time :) You are doing excellent work.
>
> Since RAW import dialog itself is almost complete I will allow myself
> for some remarks ;)
>
> - not clear way for zoom. Ctrl-MouseWheel works but definitely not
>  enough - especially no way to set 1:1 zoom factor
> - cannot abandon action and return to Album view, have to import with
>  default settings and close editor window to return there; should be
>  Cancel action which will return user directly to main window
> - most RAW import tools I know use E.V. for exposure correction - 99% of
>  users will expect that somewhere
> - some way to save settings and use those profiles to import other
>  photos?
> - even when imported with 16-bit checkbox unchecked Properties in image
>  editor shows that image as 48 bpp - but when saved as tiff (without
>  any other settings changed) this is regular 24 bpp image. I understand
>  this is because in IE this is still 48 bpp RAW image it will be only
>  later exported with 24 bpp depth - but this is misleading.

It's not reproductible here. I have loaded a DNG raw file in editor
using RAW import with 16 bits color depth, and saved it to tiff as
well. Target file use the right color depth. Look my screenshot :

http://digikam3rdparty.free.fr/Screenshots/temp/raw2tiff16bits.png

Best

Gilles
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:

> > - even when imported with 16-bit checkbox unchecked Properties in
> > image editor shows that image as 48 bpp - but when saved as tiff
> > (without any other settings changed) this is regular 24 bpp image. I
> > understand this is because in IE this is still 48 bpp RAW image it
> > will be only later exported with 24 bpp depth - but this is
> > misleading.
>
> It's not reproductible here. I have loaded a DNG raw file in editor
> using RAW import with 16 bits color depth, and saved it to tiff as
> well. Target file use the right color depth. Look my screenshot :
>
> http://digikam3rdparty.free.fr/Screenshots/temp/raw2tiff16bits.png

For 16-bits its working for me too. Did you try with 8-bit import?

m.

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
> >> -Add Lineary adjustmant using curve widget (as UFRAW).
> >
> > Doesn't work :( (svn 845503)
> > Widget is there, I can play with curve but without effects.
>
> It take effect to press on preview for the moment.

Doesn't work for me.

> > - most RAW import tools I know use E.V. for exposure correction - 99%
> > of users will expect that somewhere
>
> well the unit is EV in current exposure settings. What that you need
> exactly ?

Where is it noted? I see Exposure Exposure with -0.50 +0.50 range

Somewhere in White Balance? BTW I think layout of White Balance in RAW
import and White Balance as plugin should be more similar.

m.

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
> If you can, please send me in private a RAW sample from you Fuji
> camera. I have only one Fuji sample in my RAW repository.

Do you know this site:

http://raw.fotosite.pl/

m.

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

2008/8/12 Mikolaj Machowski <[hidden email]>:

> Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
>> >> -Add Lineary adjustmant using curve widget (as UFRAW).
>> >
>> > Doesn't work :( (svn 845503)
>> > Widget is there, I can play with curve but without effects.
>>
>> It take effect to press on preview for the moment.
>
> Doesn't work for me.
>

Hum. I have simplified image loading with commit #846035. checkout and try again

>> > - most RAW import tools I know use E.V. for exposure correction - 99%
>> > of users will expect that somewhere
>>
>> well the unit is EV in current exposure settings. What that you need
>> exactly ?
>
> Where is it noted? I see Exposure Exposure with -0.50 +0.50 range

Shift+F1 over the slider...

>
> Somewhere in White Balance? BTW I think layout of White Balance in RAW
> import and White Balance as plugin should be more similar.

yes, i will improve it again

Gilles
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

2008/8/12 Mikolaj Machowski <[hidden email]>:
> Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
>> If you can, please send me in private a RAW sample from you Fuji
>> camera. I have only one Fuji sample in my RAW repository.
>
> Do you know this site:
>
> http://raw.fotosite.pl/

Very interresting. Thanks for the link

Gilles
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:

> 2008/8/12 Mikolaj Machowski <[hidden email]>:
> > Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
> >> >> -Add Lineary adjustmant using curve widget (as UFRAW).
> >> >
> >> > Doesn't work :( (svn 845503)
> >> > Widget is there, I can play with curve but without effects.
> >>
> >> It take effect to press on preview for the moment.
> >
> > Doesn't work for me.
>
> Hum. I have simplified image loading with commit #846035. checkout and
> try again

Well, now it takes effect but widget is completely broken. See
attached image.

> >> > - most RAW import tools I know use E.V. for exposure correction -
> >> > 99% of users will expect that somewhere
> >>
> >> well the unit is EV in current exposure settings. What that you need
> >> exactly ?
> >
> > Where is it noted? I see Exposure Exposure with -0.50 +0.50 range
>
> Shift+F1 over the slider...

OK - but why only -0.5 +0.5 range? I would expect more like -3 +3 range
for fixing of badly broken images.

m.


_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

2008/8/13 Mikolaj Machowski <[hidden email]>:

> Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
>> 2008/8/12 Mikolaj Machowski <[hidden email]>:
>> > Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
>> >> >> -Add Lineary adjustmant using curve widget (as UFRAW).
>> >> >
>> >> > Doesn't work :( (svn 845503)
>> >> > Widget is there, I can play with curve but without effects.
>> >>
>> >> It take effect to press on preview for the moment.
>> >
>> > Doesn't work for me.
>>
>> Hum. I have simplified image loading with commit #846035. checkout and
>> try again
>
> Well, now it takes effect but widget is completely broken. See
> attached image.

Sound like your curves saved in rc file beween session  is broken
somewhere. Press curve reset button (on the bottom left) and try again

>
>> >> > - most RAW import tools I know use E.V. for exposure correction -
>> >> > 99% of users will expect that somewhere
>> >>
>> >> well the unit is EV in current exposure settings. What that you need
>> >> exactly ?
>> >
>> > Where is it noted? I see Exposure Exposure with -0.50 +0.50 range
>>
>> Shift+F1 over the slider...
>
> OK - but why only -0.5 +0.5 range? I would expect more like -3 +3 range
> for fixing of badly broken images.
>

you have right. I will fix it.

Gilles
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Thursday 14 of August 2008, Gilles Caulier napisał:
> > Well, now it takes effect but widget is completely broken. See
> > attached image.
>
> Sound like your curves saved in rc file beween session  is broken
> somewhere. Press curve reset button (on the bottom left) and try again

It wasn't only rc file. Had to make distclean in digikam directory and
build from scratc - but it works now, thanks.

m.

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gerhard Kulzer-3]

On Wednesday 13 August 2008 08:18:24 Gilles Caulier wrote:

> 2008/8/13 Mikolaj Machowski <[hidden email]>:

> > Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:

> >> 2008/8/12 Mikolaj Machowski <[hidden email]>:

> >> > Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:

> >> >> >> -Add Lineary adjustmant using curve widget (as UFRAW).

> >> >> >

> >> >> > Doesn't work :( (svn 845503)

> >> >> > Widget is there, I can play with curve but without effects.

> >> >>

> >> >> It take effect to press on preview for the moment.

> >> >

> >> > Doesn't work for me.

> >>

> >> Hum. I have simplified image loading with commit #846035. checkout and

> >> try again

> >

> > Well, now it takes effect but widget is completely broken. See

> > attached image.

>

> Sound like your curves saved in rc file beween session is broken

> somewhere. Press curve reset button (on the bottom left) and try again

>

> >> >> > - most RAW import tools I know use E.V. for exposure correction -

> >> >> > 99% of users will expect that somewhere

> >> >>

> >> >> well the unit is EV in current exposure settings. What that you need

> >> >> exactly ?

> >> >

> >> > Where is it noted? I see Exposure Exposure with -0.50 +0.50 range

> >>

> >> Shift+F1 over the slider...

> >

> > OK - but why only -0.5 +0.5 range? I would expect more like -3 +3 range

> > for fixing of badly broken images.

>

> you have right. I will fix it.

>

> Gilles

Hi Gilles,

I've been battling for hours with this error in 0.9.5-svn because I want to test the rawimport, but I can't find a remedy. Configuration goes fine and then I get this error message:

...

config.status: creating config.h

config.status: config.h is unchanged

config.status: executing depfiles commands

-- digiKam configure results -------------------

-- using internal libsqlite3...... YES

-- libgphoto2 library found....... YES

-- libtiff library found..... .... YES

-- libpng library found........... YES

-- libjasper library found........ YES

-- liblcms library found.......... YES

-- libkipi library found.......... YES

-- libkexiv2 library found........ YES

-- libkdcraw library found........ YES

------------------------------------------------

Good - your configure finished. Start make now

./configure --prefix=/usr

make: *** No rule to make target `../acinclude.m4', needed by `Makefile.in'. Stop.

When I use the tarball of 0.9.4 all compiles well. So I don't believe that I've lost some dependency files.

Got any idea?

Thanks in advance

Gerhard

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Gerhard,

from where are you starting configure? From within graphics or digiKam? To
make configure work fine I suggest to start from the graphics folder (like
mentioned on the digiKam website).

If your checkout is a little bit older and you were able to compile before,
you might need to repeat those steps:

make -f Makefile.cvs
./configure --enable-debug=full --prefix=/usr (or appropriate path)

Sometimes the autotools don't recognize that something significant has changed
and they don't update all the makefile dependencies.

On Saturday 16 August 2008 08:38:38 Gerhard Kulzer wrote:

> Good - your configure finished. Start make now
>
> ./configure --prefix=/usr
> make: *** No rule to make target `../acinclude.m4', needed by
> `Makefile.in'. Stop.
>

This looks like the described autotools problem in the above post. I hope this
will fix it.

Andi
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gerhard Kulzer-3]

On Saturday 16 August 2008 09:49:09 Andi Clemens wrote:

> Gerhard,

>

> from where are you starting configure? From within graphics or digiKam? To

> make configure work fine I suggest to start from the graphics folder (like

> mentioned on the digiKam website).

I alway configure from graphics, I actually use a script that has been running just fine over the last two years without changes. I did not update my autotools recently.

> If your checkout is a little bit older and you were able to compile before,

> you might need to repeat those steps:

>

> make -f Makefile.cvs

> ./configure --enable-debug=full --prefix=/usr (or appropriate path)

Sure, always like that, and I build in a separate folder which is removed clean every time.

Gerhard

> Sometimes the autotools don't recognize that something significant has

> changed and they don't update all the makefile dependencies.

>

> On Saturday 16 August 2008 08:38:38 Gerhard Kulzer wrote:

> > Good - your configure finished. Start make now

> >

> > ./configure --prefix=/usr

> > make: *** No rule to make target `../acinclude.m4', needed by

> > `Makefile.in'. Stop.

>

> This looks like the described autotools problem in the above post. I hope

> this will fix it.

>

> Andi

> _______________________________________________

> Digikam-devel mailing list

> [hidden email]

> https://mail.kde.org/mailman/listinfo/digikam-devel

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Hmm strange, I just did a fresh checkout and configure, works fine here...

Andi


On Saturday 16 August 2008 10:25:11 Gerhard Kulzer wrote:

> On Saturday 16 August 2008 09:49:09 Andi Clemens wrote:
> > Gerhard,
> >
> > from where are you starting configure? From within graphics or digiKam?
> > To make configure work fine I suggest to start from the graphics folder
> > (like mentioned on the digiKam website).
>
> I alway configure from graphics, I actually use a script that has been
> running just fine over the last two years without changes. I did not update
> my autotools recently.
>
> > If your checkout is a little bit older and you were able to compile
> > before, you might need to repeat those steps:
> >
> > make -f Makefile.cvs
> > ./configure --enable-debug=full --prefix=/usr (or appropriate path)
>
> Sure, always like that, and I build in a separate folder which is removed
> clean every time.
>
> Gerhard
>
> > Sometimes the autotools don't recognize that something significant has
> > changed and they don't update all the makefile dependencies.
> >
> > On Saturday 16 August 2008 08:38:38 Gerhard Kulzer wrote:
> > > Good - your configure finished. Start make now
> > >
> > > ./configure --prefix=/usr
> > > make: *** No rule to make target `../acinclude.m4', needed by
> > > `Makefile.in'. Stop.
> >
> > This looks like the described autotools problem in the above post. I hope
> > this will fix it.
> >
> > Andi
> > _______________________________________________
> > Digikam-devel mailing list
> > [hidden email]
> > https://mail.kde.org/mailman/listinfo/digikam-devel

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

Dnia Saturday 16 of August 2008, Gerhard Kulzer napisał:

> On Saturday 16 August 2008 09:49:09 Andi Clemens wrote:
> > Gerhard,
> >
> > from where are you starting configure? From within graphics or
> > digiKam? To make configure work fine I suggest to start from the
> > graphics folder (like mentioned on the digiKam website).
>
> I alway configure from graphics, I actually use a script that has been
> running just fine over the last two years without changes. I did not
> update my autotools recently.
>

You need at least make distclean, or even fresh checkout of whole
digikam dir.

m.

_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

2008/8/16, Gerhard Kulzer <[hidden email]>:

> On Wednesday 13 August 2008 08:18:24 Gilles Caulier wrote:
>> 2008/8/13 Mikolaj Machowski <[hidden email]>:
>> > Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
>> >> 2008/8/12 Mikolaj Machowski <[hidden email]>:
>> >> > Dnia Tuesday 12 of August 2008, Gilles Caulier napisał:
>> >> >> >> -Add Lineary adjustmant using curve widget (as UFRAW).
>> >> >> >
>> >> >> > Doesn't work :( (svn 845503)
>> >> >> > Widget is there, I can play with curve but without effects.
>> >> >>
>> >> >> It take effect to press on preview for the moment.
>> >> >
>> >> > Doesn't work for me.
>> >>
>> >> Hum. I have simplified image loading with commit #846035. checkout and
>> >> try again
>> >
>> > Well, now it takes effect but widget is completely broken. See
>> > attached image.
>>
>> Sound like your curves saved in rc file beween session  is broken
>> somewhere. Press curve reset button (on the bottom left) and try again
>>
>> >> >> > - most RAW import tools I know use E.V. for exposure correction -
>> >> >> > 99% of users will expect that somewhere
>> >> >>
>> >> >> well the unit is EV in current exposure settings. What that you need
>> >> >> exactly ?
>> >> >
>> >> > Where is it noted? I see Exposure Exposure with -0.50 +0.50 range
>> >>
>> >> Shift+F1 over the slider...
>> >
>> > OK - but why only -0.5 +0.5 range? I would expect more like -3 +3 range
>> > for fixing of badly broken images.
>>
>> you have right. I will fix it.
>>
>> Gilles
>
> Hi Gilles,
> I've been battling for hours with this error in 0.9.5-svn because I want to
> test the rawimport, but I can't find a remedy. Configuration goes fine and
> then I
> get this error message:
> ...
> config.status: creating config.h
> config.status: config.h is unchanged
> config.status: executing depfiles commands
>
> -- digiKam configure results -------------------
> -- using internal libsqlite3...... YES
> -- libgphoto2 library found....... YES
> -- libtiff library found..... .... YES
> -- libpng library found........... YES
> -- libjasper library found........ YES
> -- liblcms library found.......... YES
> -- libkipi library found.......... YES
> -- libkexiv2 library found........ YES
> -- libkdcraw library found........ YES
> ------------------------------------------------
>
> Good - your configure finished. Start make now
>
> ./configure --prefix=/usr
> make: *** No rule to make target `../acinclude.m4', needed by `Makefile.in'.
>
> Stop.
>
> When I use the tarball of 0.9.4 all compiles well. So I don't believe that
> I've lost some dependency files.
> Got any idea?
>
> Thanks in advance
>

Gerhard

With KDE3 code, you need to checkout admin folder with all autotools
macros relevant of KDE3. Are you checkout this folder as described
here :

http://www.digikam.org/drupal/download?q=download/svn

best

Gilles
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel