Problems with hald automounting my digicam

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Problems with hald automounting my digicam

Florian Ehinger
Hello

I have problems with mounting the my digitalcamera. It used to be no problem
that KDE was mounting it as a normal USB Storage device but recently it is
not working anymore.

KDE still recognizes the camara and pops up the window. But when I try to open
it Konqueror gives the error "no such medium"

I am not sure since when the problem occurs. I have recently updated to KDE
3.5.8 as well as the kernel (2.6.18.8-0.7) and hald
(hal-0.5.8_git20061106-31.3).

I get the following messages in  /var/log/messages (whole output at the end of
the mail)

Oct 28 17:58:14 Idefix hald[10538]: forcibly attempting to lazy
     unmount /dev/sdb1 as enclosing drive was disconnected
Oct 28 17:58:14 Idefix hald: unmounted /dev/sdb1 from '/media/disk' on behalf
     of uid 0

The blockdevice "/dev/sdb1 " is not existing any more after this messages,
however when I disable hald I can mount the camera without any problems
manually.

KDE still can mount my memory stick without any problems. But I have
discovered that the stick is using ehci instead of ohci like the camera.

Any ideas?
Is it possible to disable the hald for the camera?

Thank you
 Florian


/var/log/messages

Oct 28 17:58:10 Idefix kernel: usb 2-1: new full speed USB device using
uhci_hcd and address 7
Oct 28 17:58:10 Idefix kernel: usb 2-1: new device found, idVendor=04da,
idProduct=2372
Oct 28 17:58:10 Idefix kernel: usb 2-1: new device strings: Mfr=1, Product=2,
SerialNumber=0
Oct 28 17:58:10 Idefix kernel: usb 2-1: Product: DMC-LZ2
Oct 28 17:58:10 Idefix kernel: usb 2-1: Manufacturer: Panasonic
Oct 28 17:58:10 Idefix kernel: usb 2-1: configuration #1 chosen from 1 choice
Oct 28 17:58:10 Idefix kernel: scsi6 : SCSI emulation for USB Mass Storage
devices
Oct 28 17:58:10 Idefix kernel: usb-storage: device found at 7
Oct 28 17:58:10 Idefix kernel: usb-storage: waiting for device to settle
before scanning
Oct 28 17:58:11 Idefix kernel:   Vendor: MATSHITA  Model: DMC-LZ2          
Rev: 0100
Oct 28 17:58:11 Idefix kernel:   Type:   Direct-Access                      
ANSI SCSI revision: 02
Oct 28 17:58:11 Idefix kernel: SCSI device sdb: 3970048 512-byte hdwr sectors
(2033 MB)
Oct 28 17:58:11 Idefix kernel: sdb: Write Protect is off
Oct 28 17:58:11 Idefix kernel: sdb: Mode Sense: 04 00 00 00
Oct 28 17:58:11 Idefix kernel: sdb: assuming drive cache: write through
Oct 28 17:58:11 Idefix kernel: SCSI device sdb: 3970048 512-byte hdwr sectors
(2033 MB)
Oct 28 17:58:11 Idefix kernel: sdb: Write Protect is off
Oct 28 17:58:11 Idefix kernel: sdb: Mode Sense: 04 00 00 00
Oct 28 17:58:11 Idefix kernel: sdb: assuming drive cache: write through
Oct 28 17:58:11 Idefix kernel:  sdb: sdb1
Oct 28 17:58:11 Idefix kernel: sd 6:0:0:0: Attached scsi removable disk sdb
Oct 28 17:58:11 Idefix kernel: sd 6:0:0:0: Attached scsi generic sg1 type 0
Oct 28 17:58:11 Idefix kernel: usb-storage: device scan complete
Oct 28 17:58:12 Idefix hald: mounted /dev/sdb1 on behalf of uid 1003
Oct 28 17:58:14 Idefix hald[10538]: forcibly attempting to lazy
unmount /dev/sdb1 as enclosing drive was disconnected
Oct 28 17:58:14 Idefix hald: unmounted /dev/sdb1 from '/media/disk' on behalf
of uid 0
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users