Print Assistant
Locked
12
12
 
|
I have just tried to print a photo from digikam using the Print
Assistant and found that I am unable to select some of the paper sizes supported by my printer, a Canon IP7250. I can load most of the normal A4 type and Envelope sizes but it will not select 5x7 Borderless when I click on it, which is what I wanted to use. I have used Gimp to print the photo now as I wanted but still cannot get it to allow that size either in the Print Assistant or just Print Images. Anyone any ideas please? Stuart -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
|
|
In Print assistant, there are few config template files which define paper layout to use with printers (if i remember)... Look here for details : But, i feel that your printer driver is not complete and do not provide all device information to use in high level side. Gilles Caulier 2016-08-03 18:46 GMT+02:00 Stuart T Rogers <[hidden email]>: I have just tried to print a photo from digikam using the Print Assistant and found that I am unable to select some of the paper sizes supported by my printer, a Canon IP7250. I can load most of the normal A4 type and Envelope sizes but it will not select 5x7 Borderless when I click on it, which is what I wanted to use. _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
|
|
Gilles
I will check that out but all I can say is the driver works perfectly in V4.14 of digikam, and in other programs. It shows the papaer sizes but will not allow me to select them, it still leaves the previous setting when I click on the photo paper size I want. Stuart On 04/08/16 11:06, Gilles Caulier wrote: > In Print assistant, there are few config template files which define > paper layout to use with printers (if i remember)... > > Look here for details : > > https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > > But, i feel that your printer driver is not complete and do not provide > all device information to use in high level side. > > Gilles Caulier > > > 2016-08-03 18:46 GMT+02:00 Stuart T Rogers <[hidden email] > <mailto:[hidden email]>>: > > I have just tried to print a photo from digikam using the Print > Assistant and found that I am unable to select some of the paper > sizes supported by my printer, a Canon IP7250. I can load most of > the normal A4 type and Envelope sizes but it will not select 5x7 > Borderless when I click on it, which is what I wanted to use. > > I have used Gimp to print the photo now as I wanted but still cannot > get it to allow that size either in the Print Assistant or just > Print Images. > > Anyone any ideas please? > > Stuart > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > _______________________________________________ > Digikam-users mailing list > [hidden email] <mailto:[hidden email]> > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > > > > _______________________________________________ > Digikam-users mailing list > [hidden email] > https://mail.kde.org/mailman/listinfo/digikam-users > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
|
|
Further testing shows that the printer driver works perfectly with
darktable and shotwell as well as Gimp. It only fails using digikam, showfoto and gwenview. Stuart On 04/08/16 20:07, Stuart T Rogers wrote: > Gilles > > I will check that out but all I can say is the driver works perfectly in > V4.14 of digikam, and in other programs. It shows the papaer sizes but > will not allow me to select them, it still leaves the previous setting > when I click on the photo paper size I want. > > Stuart > > On 04/08/16 11:06, Gilles Caulier wrote: >> In Print assistant, there are few config template files which define >> paper layout to use with printers (if i remember)... >> >> Look here for details : >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> But, i feel that your printer driver is not complete and do not provide >> all device information to use in high level side. >> >> Gilles Caulier >> >> >> 2016-08-03 18:46 GMT+02:00 Stuart T Rogers <[hidden email] >> <mailto:[hidden email]>>: >> >> I have just tried to print a photo from digikam using the Print >> Assistant and found that I am unable to select some of the paper >> sizes supported by my printer, a Canon IP7250. I can load most of >> the normal A4 type and Envelope sizes but it will not select 5x7 >> Borderless when I click on it, which is what I wanted to use. >> >> I have used Gimp to print the photo now as I wanted but still cannot >> get it to allow that size either in the Print Assistant or just >> Print Images. >> >> Anyone any ideas please? >> >> Stuart >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] <mailto:[hidden email]> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> >> >> >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> https://mail.kde.org/mailman/listinfo/digikam-users >> > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org _______________________________________________ Digikam-users mailing list [hidden email] https://mail.kde.org/mailman/listinfo/digikam-users |
|
|
Well the driver for Qt application pass through the Qt5Print interface. The problem must be located in Qt5... Gilles Caulier 2016-08-04 23:01 GMT+02:00 Stuart T Rogers <[hidden email]>: Further testing shows that the printer driver works perfectly with darktable and shotwell as well as Gimp. It only fails using digikam, showfoto and gwenview. |
|
|
I have been doing some more on this. When I start the Print Assistant I
see two lines in the top left box, one saying Unsupported Paper Size and a second line saying Custom and that's it, no templates at all. I can see the templates.xml file in /usr/share/kipiplugin_printimages/templates/ and it seems to contain what it should and I've checked the permissions and all files are publicly readable. I do not have my own templates file in my home directory. Surely I should see the templates from this file when I start the Print Assistant. I think I need to fix this before trying to progress further. Also found that I am unable to change orientation between portrait and landscape, it changes on the dialog but when I OK it and go back into the dialog portrait is still selected. Stuart On 06/08/16 06:42, Gilles Caulier wrote: > Well the driver for Qt application pass through the Qt5Print interface. > The problem must be located in Qt5... > > Gilles Caulier > > 2016-08-04 23:01 GMT+02:00 Stuart T Rogers <[hidden email] > <mailto:[hidden email]>>: > > Further testing shows that the printer driver works perfectly with > darktable and shotwell as well as Gimp. It only fails using digikam, > showfoto and gwenview. > > Stuart > > > On 04/08/16 20:07, Stuart T Rogers wrote: > > Gilles > > I will check that out but all I can say is the driver works > perfectly in > V4.14 of digikam, and in other programs. It shows the papaer > sizes but > will not allow me to select them, it still leaves the previous > setting > when I click on the photo paper size I want. > > Stuart > > On 04/08/16 11:06, Gilles Caulier wrote: > > In Print assistant, there are few config template files > which define > paper layout to use with printers (if i remember)... > > Look here for details : > > https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > > But, i feel that your printer driver is not complete and do > not provide > all device information to use in high level side. > > Gilles Caulier > > > 2016-08-03 18:46 GMT+02:00 Stuart T Rogers > <[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>: > > I have just tried to print a photo from digikam using > the Print > Assistant and found that I am unable to select some of > the paper > sizes supported by my printer, a Canon IP7250. I can > load most of > the normal A4 type and Envelope sizes but it will not > select 5x7 > Borderless when I click on it, which is what I wanted to > use. > > I have used Gimp to print the photo now as I wanted but > still cannot > get it to allow that size either in the Print Assistant > or just > Print Images. > > Anyone any ideas please? > > Stuart > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > _______________________________________________ > Digikam-users mailing list > [hidden email] <mailto:[hidden email]> > <mailto:[hidden email] <mailto:[hidden email]>> > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > > > > _______________________________________________ > Digikam-users mailing list > [hidden email] <mailto:[hidden email]> > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > _______________________________________________ > Digikam-users mailing list > [hidden email] <mailto:[hidden email]> > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
Can anyone here please let me know whether or not they see this issue? I
am getting nowhere trying to figure out why this does not work for me in V5 but does in 4.14 on the same openSUSE Tumbleweed system. I'd like to try and work out if this is a bug in the Print Assistant or if it is something to do with the openSUSE implementation/compilation. I must point out that Print Images also fails I assume the Print Assistant is part of the Kipi Plugins which are at V5.1.0 and digiKam itself is 5.1.0. Stuart On 10/08/16 10:32, Stuart T Rogers wrote: > I have been doing some more on this. When I start the Print Assistant I > see two lines in the top left box, one saying Unsupported Paper Size and > a second line saying Custom and that's it, no templates at all. > > I can see the templates.xml file in > /usr/share/kipiplugin_printimages/templates/ and it seems to contain > what it should and I've checked the permissions and all files are > publicly readable. I do not have my own templates file in my home > directory. Surely I should see the templates from this file when I start > the Print Assistant. I think I need to fix this before trying to > progress further. > > Also found that I am unable to change orientation between portrait and > landscape, it changes on the dialog but when I OK it and go back into > the dialog portrait is still selected. > > Stuart > > On 06/08/16 06:42, Gilles Caulier wrote: >> Well the driver for Qt application pass through the Qt5Print interface. >> The problem must be located in Qt5... >> >> Gilles Caulier >> >> 2016-08-04 23:01 GMT+02:00 Stuart T Rogers <[hidden email] >> <mailto:[hidden email]>>: >> >> Further testing shows that the printer driver works perfectly with >> darktable and shotwell as well as Gimp. It only fails using digikam, >> showfoto and gwenview. >> >> Stuart >> >> >> On 04/08/16 20:07, Stuart T Rogers wrote: >> >> Gilles >> >> I will check that out but all I can say is the driver works >> perfectly in >> V4.14 of digikam, and in other programs. It shows the papaer >> sizes but >> will not allow me to select them, it still leaves the previous >> setting >> when I click on the photo paper size I want. >> >> Stuart >> >> On 04/08/16 11:06, Gilles Caulier wrote: >> >> In Print assistant, there are few config template files >> which define >> paper layout to use with printers (if i remember)... >> >> Look here for details : >> >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> But, i feel that your printer driver is not complete and do >> not provide >> all device information to use in high level side. >> >> Gilles Caulier >> >> >> 2016-08-03 18:46 GMT+02:00 Stuart T Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>: >> >> I have just tried to print a photo from digikam using >> the Print >> Assistant and found that I am unable to select some of >> the paper >> sizes supported by my printer, a Canon IP7250. I can >> load most of >> the normal A4 type and Envelope sizes but it will not >> select 5x7 >> Borderless when I click on it, which is what I wanted to >> use. >> >> I have used Gimp to print the photo now as I wanted but >> still cannot >> get it to allow that size either in the Print Assistant >> or just >> Print Images. >> >> Anyone any ideas please? >> >> Stuart >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] <mailto:[hidden email]> >> <mailto:[hidden email] <mailto:[hidden email]>> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> >> >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] <mailto:[hidden email]> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] <mailto:[hidden email]> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> >> > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
2016-08-13 11:07 GMT+02:00 Stuart T Rogers <[hidden email]>: Can anyone here please let me know whether or not they see this issue? I am getting nowhere trying to figure out why this does not work for me in V5 but does in 4.14 on the same openSUSE Tumbleweed system. I'd like to try and work out if this is a bug in the Print Assistant or if it is something to do with the openSUSE implementation/compilation. I must point out that Print Images also fails No idea about OpenSuse. If it work with 4.x and not 5.x, i suspect something different with Qt5 about Print interface and the way to handle printer features/configuration. The tools have been ported as well from Qt4 to Qt5. Nothing have been removed especially. I assume the Print Assistant is part of the Kipi Plugins which are at V5.1.0 and digiKam itself is 5.1.0. yes it is... Gilles Caulier
|
|
|
I can see this bug on Debian Testing as well.
Messages from the console are: kipi.plugins: 0x4c219d8 kipi.plugins: printers: 1 kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" kipi.plugins: current "Select page layout" kipi.plugins: "Select page layout" kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(-1, -1) kipi.plugins: d->m_photoSizes.count()= 0 kipi.plugins: d->m_photoSizes.isEmpty()= true kipi.plugins: Empty photoSize-list, create default size I'm guessing that perhaps in parsing the templates.xml file it looks for a paper size of 210x297 and fails to match against the A4 size of 210.0x297.0? That does not explain why the selection of a different paper size or orientation does not stick though. Andrew On 13/08/16 10:21, Gilles Caulier wrote: > > > 2016-08-13 11:07 GMT+02:00 Stuart T Rogers <[hidden email] > <mailto:[hidden email]>>: > > Can anyone here please let me know whether or not they see this > issue? I am getting nowhere trying to figure out why this does not > work for me in V5 but does in 4.14 on the same openSUSE Tumbleweed > system. I'd like to try and work out if this is a bug in the Print > Assistant or if it is something to do with the openSUSE > implementation/compilation. I must point out that Print Images also > fails > > No idea about OpenSuse. > > If it work with 4.x and not 5.x, i suspect something different with Qt5 > about Print interface and the way to handle printer features/configuration. > > The tools have been ported as well from Qt4 to Qt5. Nothing have been > removed especially. > > > > I assume the Print Assistant is part of the Kipi Plugins which are > at V5.1.0 and digiKam itself is 5.1.0. > > > yes it is... > > Gilles Caulier > > > > Stuart > > > On 10/08/16 10:32, Stuart T Rogers wrote: > > I have been doing some more on this. When I start the Print > Assistant I > see two lines in the top left box, one saying Unsupported Paper > Size and > a second line saying Custom and that's it, no templates at all. > > I can see the templates.xml file in > /usr/share/kipiplugin_printimages/templates/ and it seems to contain > what it should and I've checked the permissions and all files are > publicly readable. I do not have my own templates file in my home > directory. Surely I should see the templates from this file when > I start > the Print Assistant. I think I need to fix this before trying to > progress further. > > Also found that I am unable to change orientation between > portrait and > landscape, it changes on the dialog but when I OK it and go back > into > the dialog portrait is still selected. > > Stuart > > On 06/08/16 06:42, Gilles Caulier wrote: > > Well the driver for Qt application pass through the Qt5Print > interface. > The problem must be located in Qt5... > > Gilles Caulier > > 2016-08-04 23:01 GMT+02:00 Stuart T Rogers > <[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>: > > Further testing shows that the printer driver works > perfectly with > darktable and shotwell as well as Gimp. It only fails > using digikam, > showfoto and gwenview. > > Stuart > > > On 04/08/16 20:07, Stuart T Rogers wrote: > > Gilles > > I will check that out but all I can say is the > driver works > perfectly in > V4.14 of digikam, and in other programs. It shows > the papaer > sizes but > will not allow me to select them, it still leaves > the previous > setting > when I click on the photo paper size I want. > > Stuart > > On 04/08/16 11:06, Gilles Caulier wrote: > > In Print assistant, there are few config > template files > which define > paper layout to use with printers (if i remember)... > > Look here for details : > > > https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> > > > > But, i feel that your printer driver is not > complete and do > not provide > all device information to use in high level side. > > Gilles Caulier > > > 2016-08-03 18:46 GMT+02:00 Stuart T Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>: > > I have just tried to print a photo from > digikam using > the Print > Assistant and found that I am unable to > select some of > the paper > sizes supported by my printer, a Canon > IP7250. I can > load most of > the normal A4 type and Envelope sizes but it > will not > select 5x7 > Borderless when I click on it, which is what > I wanted to > use. > > I have used Gimp to print the photo now as I > wanted but > still cannot > get it to allow that size either in the > Print Assistant > or just > Print Images. > > Anyone any ideas please? > > Stuart > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>>> > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > _______________________________________________ > Digikam-users mailing list > [hidden email] <mailto:[hidden email]> > <mailto:[hidden email] <mailto:[hidden email]>> > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > |
|
|
I have run digikam from a console and see these messages when trying to
use the Print Assistant. Can anyone here please help in fixing this? I am more than happy to do some testing but need some advice on how to proceed. kipi.plugins: printers: 1 kipi.plugins: printer: "iP7200series-TurboPrint" kipi.plugins: current "Select page layout" kipi.plugins: "Select page layout" kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(-1, -1) kipi.plugins: d->m_photoSizes.count()= 0 kipi.plugins: d->m_photoSizes.isEmpty()= true kipi.plugins: Empty photoSize-list, create default size digikam.dimg: "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : JPEG file identified digikam.metaengine: Loading image history "" digikam.metaengine: DateTime => Exif.Photo.DateTimeOriginal => QDateTime(2015-12-26 16:41:57.000 GMT Qt::TimeSpec(LocalTime)) digikam.metaengine: Exif color-space tag is sRGB. Using default sRGB ICC profile. digikam.metaengine: Orientation => Exif.Image.Orientation => 1 kipi.plugins: Creating new ImageListViewItem with url QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") for list view KIPIPlugins::KPImagesListView(0x482c7b0) kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(210, 297) kipi.plugins: "Select page layout" kipi.plugins: before "Select page layout" kipi.plugins: current "Select page layout" kipi.plugins: Creating new ImageListViewItem with url QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") for list view KIPIPlugins::KPImagesListView(0x482c7b0) kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(210, 297) kipi.plugins: Request to update thumbnail for QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") kipi.plugins: Request to update thumbnail for QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") kipi.plugins: Update thumb in list for QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") kipi.plugins: Received new thumbnail for url QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") for view KIPIPlugins::KPImagesListView(0x482c7b0) kipi.plugins: Chosen printer: "iP7200series-TurboPrint" kipi.plugins: Dialog exit, new size QSizeF(210, 297) internal size QSizeF(210, 297) kipi.plugins: Dialog exit, new margins: left 0 right 0 top 0 bottom 0 kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(210, 297) kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(210, 297) Stuart On 16/08/16 00:06, Andrew Goodbody wrote: > I can see this bug on Debian Testing as well. > > Messages from the console are: > > kipi.plugins: 0x4c219d8 > kipi.plugins: printers: 1 > kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page size QSizeF(-1, > -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > I'm guessing that perhaps in parsing the templates.xml file it looks for > a paper size of 210x297 and fails to match against the A4 size of > 210.0x297.0? > > That does not explain why the selection of a different paper size or > orientation does not stick though. > > Andrew > > On 13/08/16 10:21, Gilles Caulier wrote: >> >> >> 2016-08-13 11:07 GMT+02:00 Stuart T Rogers <[hidden email] >> <mailto:[hidden email]>>: >> >> Can anyone here please let me know whether or not they see this >> issue? I am getting nowhere trying to figure out why this does not >> work for me in V5 but does in 4.14 on the same openSUSE Tumbleweed >> system. I'd like to try and work out if this is a bug in the Print >> Assistant or if it is something to do with the openSUSE >> implementation/compilation. I must point out that Print Images also >> fails >> >> No idea about OpenSuse. >> >> If it work with 4.x and not 5.x, i suspect something different with Qt5 >> about Print interface and the way to handle printer >> features/configuration. >> >> The tools have been ported as well from Qt4 to Qt5. Nothing have been >> removed especially. >> >> >> >> I assume the Print Assistant is part of the Kipi Plugins which are >> at V5.1.0 and digiKam itself is 5.1.0. >> >> >> yes it is... >> >> Gilles Caulier >> >> >> >> Stuart >> >> >> On 10/08/16 10:32, Stuart T Rogers wrote: >> >> I have been doing some more on this. When I start the Print >> Assistant I >> see two lines in the top left box, one saying Unsupported Paper >> Size and >> a second line saying Custom and that's it, no templates at all. >> >> I can see the templates.xml file in >> /usr/share/kipiplugin_printimages/templates/ and it seems to >> contain >> what it should and I've checked the permissions and all files are >> publicly readable. I do not have my own templates file in my home >> directory. Surely I should see the templates from this file when >> I start >> the Print Assistant. I think I need to fix this before trying to >> progress further. >> >> Also found that I am unable to change orientation between >> portrait and >> landscape, it changes on the dialog but when I OK it and go back >> into >> the dialog portrait is still selected. >> >> Stuart >> >> On 06/08/16 06:42, Gilles Caulier wrote: >> >> Well the driver for Qt application pass through the Qt5Print >> interface. >> The problem must be located in Qt5... >> >> Gilles Caulier >> >> 2016-08-04 23:01 GMT+02:00 Stuart T Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>: >> >> Further testing shows that the printer driver works >> perfectly with >> darktable and shotwell as well as Gimp. It only fails >> using digikam, >> showfoto and gwenview. >> >> Stuart >> >> >> On 04/08/16 20:07, Stuart T Rogers wrote: >> >> Gilles >> >> I will check that out but all I can say is the >> driver works >> perfectly in >> V4.14 of digikam, and in other programs. It shows >> the papaer >> sizes but >> will not allow me to select them, it still leaves >> the previous >> setting >> when I click on the photo paper size I want. >> >> Stuart >> >> On 04/08/16 11:06, Gilles Caulier wrote: >> >> In Print assistant, there are few config >> template files >> which define >> paper layout to use with printers (if i >> remember)... >> >> Look here for details : >> >> >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >> >> >> >> >> But, i feel that your printer driver is not >> complete and do >> not provide >> all device information to use in high level side. >> >> Gilles Caulier >> >> >> 2016-08-03 18:46 GMT+02:00 Stuart T Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>: >> >> I have just tried to print a photo from >> digikam using >> the Print >> Assistant and found that I am unable to >> select some of >> the paper >> sizes supported by my printer, a Canon >> IP7250. I can >> load most of >> the normal A4 type and Envelope sizes but it >> will not >> select 5x7 >> Borderless when I click on it, which is what >> I wanted to >> use. >> >> I have used Gimp to print the photo now as I >> wanted but >> still cannot >> get it to allow that size either in the >> Print Assistant >> or just >> Print Images. >> >> Anyone any ideas please? >> >> Stuart >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] <mailto:[hidden email]> >> <mailto:[hidden email] <mailto:[hidden email]>> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
Where is the problem exactly in this debug trace from the console ? Gilles Caulier 2016-08-19 11:18 GMT+02:00 Stuart T Rogers <[hidden email]>: I have run digikam from a console and see these messages when trying to use the Print Assistant. Can anyone here please help in fixing this? I am more than happy to do some testing but need some advice on how to proceed. |
|
|
This is the console messages from the point at which I start the Print
Assitant to the point at which I close the Assistant. I have the whole trace from start to finish of running digikam but searching through it all this is all the messages which come up while running the Assitant, the only other mention of printing is where it loads the PrintImagesUI. The last couple of lines appear when trying to change paper size from A4 to 6x4 which does not work. On 19/08/16 10:22, Gilles Caulier wrote: > Where is the problem exactly in this debug trace from the console ? > > Gilles Caulier > > 2016-08-19 11:18 GMT+02:00 Stuart T Rogers <[hidden email] > <mailto:[hidden email]>>: > > I have run digikam from a console and see these messages when trying > to use the Print Assistant. Can anyone here please help in fixing > this? I am more than happy to do some testing but need some advice > on how to proceed. > > kipi.plugins: printers: 1 > kipi.plugins: printer: "iP7200series-TurboPrint" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(-1, -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > digikam.dimg: > "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : > JPEG file identified > digikam.metaengine: Loading image history "" > digikam.metaengine: DateTime => Exif.Photo.DateTimeOriginal => > QDateTime(2015-12-26 16:41:57.000 GMT Qt::TimeSpec(LocalTime)) > digikam.metaengine: Exif color-space tag is sRGB. Using default sRGB > ICC profile. > digikam.metaengine: Orientation => Exif.Image.Orientation => 1 > kipi.plugins: Creating new ImageListViewItem with url > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for list view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: "Select page layout" > kipi.plugins: before "Select page layout" > kipi.plugins: current "Select page layout" > kipi.plugins: Creating new ImageListViewItem with url > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for list view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: Request to update thumbnail for > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Request to update thumbnail for > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Update thumb in list for > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Received new thumbnail for url > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: Chosen printer: "iP7200series-TurboPrint" > kipi.plugins: Dialog exit, new size QSizeF(210, 297) internal size > QSizeF(210, 297) > kipi.plugins: Dialog exit, new margins: left 0 right 0 top 0 > bottom 0 > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > > Stuart > > > On 16/08/16 00:06, Andrew Goodbody wrote: > > I can see this bug on Debian Testing as well. > > Messages from the console are: > > kipi.plugins: 0x4c219d8 > kipi.plugins: printers: 1 > kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(-1, > -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > I'm guessing that perhaps in parsing the templates.xml file it > looks for > a paper size of 210x297 and fails to match against the A4 size of > 210.0x297.0? > > That does not explain why the selection of a different paper size or > orientation does not stick though. > > Andrew > > On 13/08/16 10:21, Gilles Caulier wrote: > > > > 2016-08-13 11:07 GMT+02:00 Stuart T Rogers > <[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>: > > Can anyone here please let me know whether or not they > see this > issue? I am getting nowhere trying to figure out why > this does not > work for me in V5 but does in 4.14 on the same openSUSE > Tumbleweed > system. I'd like to try and work out if this is a bug in > the Print > Assistant or if it is something to do with the openSUSE > implementation/compilation. I must point out that Print > Images also > fails > > No idea about OpenSuse. > > If it work with 4.x and not 5.x, i suspect something > different with Qt5 > about Print interface and the way to handle printer > features/configuration. > > The tools have been ported as well from Qt4 to Qt5. Nothing > have been > removed especially. > > > > I assume the Print Assistant is part of the Kipi Plugins > which are > at V5.1.0 and digiKam itself is 5.1.0. > > > yes it is... > > Gilles Caulier > > > > Stuart > > > On 10/08/16 10:32, Stuart T Rogers wrote: > > I have been doing some more on this. When I start > the Print > Assistant I > see two lines in the top left box, one saying > Unsupported Paper > Size and > a second line saying Custom and that's it, no > templates at all. > > I can see the templates.xml file in > /usr/share/kipiplugin_printimages/templates/ and it > seems to > contain > what it should and I've checked the permissions and > all files are > publicly readable. I do not have my own templates > file in my home > directory. Surely I should see the templates from > this file when > I start > the Print Assistant. I think I need to fix this > before trying to > progress further. > > Also found that I am unable to change orientation > between > portrait and > landscape, it changes on the dialog but when I OK it > and go back > into > the dialog portrait is still selected. > > Stuart > > On 06/08/16 06:42, Gilles Caulier wrote: > > Well the driver for Qt application pass through > the Qt5Print > interface. > The problem must be located in Qt5... > > Gilles Caulier > > 2016-08-04 23:01 GMT+02:00 Stuart T Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>: > > Further testing shows that the printer > driver works > perfectly with > darktable and shotwell as well as Gimp. It > only fails > using digikam, > showfoto and gwenview. > > Stuart > > > On 04/08/16 20:07, Stuart T Rogers wrote: > > Gilles > > I will check that out but all I can say > is the > driver works > perfectly in > V4.14 of digikam, and in other programs. > It shows > the papaer > sizes but > will not allow me to select them, it > still leaves > the previous > setting > when I click on the photo paper size I want. > > Stuart > > On 04/08/16 11:06, Gilles Caulier wrote: > > In Print assistant, there are few config > template files > which define > paper layout to use with printers (if i > remember)... > > Look here for details : > > > > https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> > > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>> > > > > > But, i feel that your printer driver > is not > complete and do > not provide > all device information to use in > high level side. > > Gilles Caulier > > > 2016-08-03 18:46 GMT+02:00 Stuart T > Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>>: > > I have just tried to print a > photo from > digikam using > the Print > Assistant and found that I am > unable to > select some of > the paper > sizes supported by my printer, a > Canon > IP7250. I can > load most of > the normal A4 type and Envelope > sizes but it > will not > select 5x7 > Borderless when I click on it, > which is what > I wanted to > use. > > I have used Gimp to print the > photo now as I > wanted but > still cannot > get it to allow that size either > in the > Print Assistant > or just > Print Images. > > Anyone any ideas please? > > Stuart > -- > Website: > http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > > > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>>> > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
yes sure. But what it expected to see in this trace as dysfonctions ? The trace are generated by qCDebug in C++ source, located in kipiplugin tool. Code is here if you xant to take a look : Gilles Caulier 2016-08-19 11:48 GMT+02:00 Stuart T Rogers <[hidden email]>: This is the console messages from the point at which I start the Print Assitant to the point at which I close the Assistant. I have the whole trace from start to finish of running digikam but searching through it all this is all the messages which come up while running the Assitant, the only other mention of printing is where it loads the PrintImagesUI. The last couple of lines appear when trying to change paper size from A4 to 6x4 which does not work. |
|
|
That's my problem, these are all the messages seen in the console and
none of them seem to indicate what has gone wrong. There are no error messages shown which I had hoped might happen. There is no indication as to why the templates dont show up in the UI like they do in V4 and apart from the last two messages saying the paper changed from A4 to A$ when it should have changed to 4x6 there is nothing to explain it. I was hoping someone with more knowledge of this code might be able to re-create the problem. Are you saying that when you open the Print Assistant that you see a list of template sizes in V5 as I do in only V4? Stuart On 19/08/16 11:31, Gilles Caulier wrote: > yes sure. But what it expected to see in this trace as dysfonctions ? > > The trace are generated by qCDebug in C++ source, located in kipiplugin > tool. Code is here if you xant to take a look : > > https://quickgit.kde.org/?p=kipi-plugins.git&a=tree&f=printimages > > Gilles Caulier > > > > 2016-08-19 11:48 GMT+02:00 Stuart T Rogers <[hidden email] > <mailto:[hidden email]>>: > > This is the console messages from the point at which I start the > Print Assitant to the point at which I close the Assistant. I have > the whole trace from start to finish of running digikam but > searching through it all this is all the messages which come up > while running the Assitant, the only other mention of printing is > where it loads the PrintImagesUI. The last couple of lines appear > when trying to change paper size from A4 to 6x4 which does not work. > > On 19/08/16 10:22, Gilles Caulier wrote: > > Where is the problem exactly in this debug trace from the console ? > > Gilles Caulier > > 2016-08-19 11:18 GMT+02:00 Stuart T Rogers > <[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>: > > > I have run digikam from a console and see these messages > when trying > to use the Print Assistant. Can anyone here please help in > fixing > this? I am more than happy to do some testing but need some > advice > on how to proceed. > > kipi.plugins: printers: 1 > kipi.plugins: printer: "iP7200series-TurboPrint" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(-1, -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > digikam.dimg: > "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : > JPEG file identified > digikam.metaengine: Loading image history "" > digikam.metaengine: DateTime => Exif.Photo.DateTimeOriginal => > QDateTime(2015-12-26 16:41:57.000 GMT Qt::TimeSpec(LocalTime)) > digikam.metaengine: Exif color-space tag is sRGB. Using > default sRGB > ICC profile. > digikam.metaengine: Orientation => Exif.Image.Orientation => 1 > kipi.plugins: Creating new ImageListViewItem with url > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for list view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: "Select page layout" > kipi.plugins: before "Select page layout" > kipi.plugins: current "Select page layout" > kipi.plugins: Creating new ImageListViewItem with url > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for list view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: Request to update thumbnail for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Request to update thumbnail for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Update thumb in list for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Received new thumbnail for url > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: Chosen printer: "iP7200series-TurboPrint" > kipi.plugins: Dialog exit, new size QSizeF(210, 297) > internal size > QSizeF(210, 297) > kipi.plugins: Dialog exit, new margins: left 0 right 0 > top 0 > bottom 0 > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > > Stuart > > > On 16/08/16 00:06, Andrew Goodbody wrote: > > I can see this bug on Debian Testing as well. > > Messages from the console are: > > kipi.plugins: 0x4c219d8 > kipi.plugins: printers: 1 > kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page > size > QSizeF(-1, > -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > I'm guessing that perhaps in parsing the templates.xml > file it > looks for > a paper size of 210x297 and fails to match against the > A4 size of > 210.0x297.0? > > That does not explain why the selection of a different > paper size or > orientation does not stick though. > > Andrew > > On 13/08/16 10:21, Gilles Caulier wrote: > > > > 2016-08-13 11:07 GMT+02:00 Stuart T Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > > <mailto:[hidden email] > <mailto:[hidden email]>>>>: > > Can anyone here please let me know whether or > not they > see this > issue? I am getting nowhere trying to figure out why > this does not > work for me in V5 but does in 4.14 on the same > openSUSE > Tumbleweed > system. I'd like to try and work out if this is > a bug in > the Print > Assistant or if it is something to do with the > openSUSE > implementation/compilation. I must point out > that Print > Images also > fails > > No idea about OpenSuse. > > If it work with 4.x and not 5.x, i suspect something > different with Qt5 > about Print interface and the way to handle printer > features/configuration. > > The tools have been ported as well from Qt4 to Qt5. > Nothing > have been > removed especially. > > > > I assume the Print Assistant is part of the Kipi > Plugins > which are > at V5.1.0 and digiKam itself is 5.1.0. > > > yes it is... > > Gilles Caulier > > > > Stuart > > > On 10/08/16 10:32, Stuart T Rogers wrote: > > I have been doing some more on this. When I > start > the Print > Assistant I > see two lines in the top left box, one saying > Unsupported Paper > Size and > a second line saying Custom and that's it, no > templates at all. > > I can see the templates.xml file in > /usr/share/kipiplugin_printimages/templates/ > and it > seems to > contain > what it should and I've checked the > permissions and > all files are > publicly readable. I do not have my own > templates > file in my home > directory. Surely I should see the templates > from > this file when > I start > the Print Assistant. I think I need to fix this > before trying to > progress further. > > Also found that I am unable to change > orientation > between > portrait and > landscape, it changes on the dialog but when > I OK it > and go back > into > the dialog portrait is still selected. > > Stuart > > On 06/08/16 06:42, Gilles Caulier wrote: > > Well the driver for Qt application pass > through > the Qt5Print > interface. > The problem must be located in Qt5... > > Gilles Caulier > > 2016-08-04 23:01 GMT+02:00 Stuart T Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>>: > > Further testing shows that the printer > driver works > perfectly with > darktable and shotwell as well as > Gimp. It > only fails > using digikam, > showfoto and gwenview. > > Stuart > > > On 04/08/16 20:07, Stuart T Rogers > wrote: > > Gilles > > I will check that out but all I > can say > is the > driver works > perfectly in > V4.14 of digikam, and in other > programs. > It shows > the papaer > sizes but > will not allow me to select them, it > still leaves > the previous > setting > when I click on the photo paper > size I want. > > Stuart > > On 04/08/16 11:06, Gilles > Caulier wrote: > > In Print assistant, there > are few config > template files > which define > paper layout to use with > printers (if i > remember)... > > Look here for details : > > > > > https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>> > > > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>>> > > > > > But, i feel that your > printer driver > is not > complete and do > not provide > all device information to use in > high level side. > > Gilles Caulier > > > 2016-08-03 18:46 GMT+02:00 > Stuart T > Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>>>: > > I have just tried to print a > photo from > digikam using > the Print > Assistant and found that > I am > unable to > select some of > the paper > sizes supported by my > printer, a > Canon > IP7250. I can > load most of > the normal A4 type and > Envelope > sizes but it > will not > select 5x7 > Borderless when I click > on it, > which is what > I wanted to > use. > > I have used Gimp to > print the > photo now as I > wanted but > still cannot > get it to allow that > size either > in the > Print Assistant > or just > Print Images. > > Anyone any ideas please? > > Stuart > -- > Website: > http://www.stella-maris.org.uk > or: > http://www.broadstairs.org > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > <mailto:[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>> > > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>>> > > > > > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
I've been looking at the code pointed to and the message which appears
is in kipi-plugins/printimages/wizard/wizard.cpp and says Unsupported Paper Size. This is in the code which sas // get template-files and parse them. So the problem initially is that it cannot find the templates. This is a start but not sure where to go from here as I'm not a programmer! My templates are in /usr/share/kipiplugin_printimages/templates. Stuart On 19/08/16 15:38, Stuart T Rogers wrote: > That's my problem, these are all the messages seen in the console and > none of them seem to indicate what has gone wrong. There are no error > messages shown which I had hoped might happen. There is no indication as > to why the templates dont show up in the UI like they do in V4 and apart > from the last two messages saying the paper changed from A4 to A$ when > it should have changed to 4x6 there is nothing to explain it. > > I was hoping someone with more knowledge of this code might be able to > re-create the problem. > > Are you saying that when you open the Print Assistant that you see a > list of template sizes in V5 as I do in only V4? > > Stuart > > On 19/08/16 11:31, Gilles Caulier wrote: >> yes sure. But what it expected to see in this trace as dysfonctions ? >> >> The trace are generated by qCDebug in C++ source, located in kipiplugin >> tool. Code is here if you xant to take a look : >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=tree&f=printimages >> >> Gilles Caulier >> >> >> >> 2016-08-19 11:48 GMT+02:00 Stuart T Rogers <[hidden email] >> <mailto:[hidden email]>>: >> >> This is the console messages from the point at which I start the >> Print Assitant to the point at which I close the Assistant. I have >> the whole trace from start to finish of running digikam but >> searching through it all this is all the messages which come up >> while running the Assitant, the only other mention of printing is >> where it loads the PrintImagesUI. The last couple of lines appear >> when trying to change paper size from A4 to 6x4 which does not work. >> >> On 19/08/16 10:22, Gilles Caulier wrote: >> >> Where is the problem exactly in this debug trace from the >> console ? >> >> Gilles Caulier >> >> 2016-08-19 11:18 GMT+02:00 Stuart T Rogers >> <[hidden email] <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>: >> >> >> I have run digikam from a console and see these messages >> when trying >> to use the Print Assistant. Can anyone here please help in >> fixing >> this? I am more than happy to do some testing but need some >> advice >> on how to proceed. >> >> kipi.plugins: printers: 1 >> kipi.plugins: printer: "iP7200series-TurboPrint" >> kipi.plugins: current "Select page layout" >> kipi.plugins: "Select page layout" >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(-1, -1) >> kipi.plugins: d->m_photoSizes.count()= 0 >> kipi.plugins: d->m_photoSizes.isEmpty()= true >> kipi.plugins: Empty photoSize-list, create default size >> >> digikam.dimg: >> >> "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : >> JPEG file identified >> digikam.metaengine: Loading image history "" >> digikam.metaengine: DateTime => >> Exif.Photo.DateTimeOriginal => >> QDateTime(2015-12-26 16:41:57.000 GMT >> Qt::TimeSpec(LocalTime)) >> digikam.metaengine: Exif color-space tag is sRGB. Using >> default sRGB >> ICC profile. >> digikam.metaengine: Orientation => Exif.Image.Orientation >> => 1 >> kipi.plugins: Creating new ImageListViewItem with url >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> for list view KIPIPlugins::KPImagesListView(0x482c7b0) >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> kipi.plugins: "Select page layout" >> kipi.plugins: before "Select page layout" >> kipi.plugins: current "Select page layout" >> kipi.plugins: Creating new ImageListViewItem with url >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> for list view KIPIPlugins::KPImagesListView(0x482c7b0) >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> kipi.plugins: Request to update thumbnail for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: Request to update thumbnail for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: Update thumb in list for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: Received new thumbnail for url >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> for view KIPIPlugins::KPImagesListView(0x482c7b0) >> kipi.plugins: Chosen printer: "iP7200series-TurboPrint" >> kipi.plugins: Dialog exit, new size QSizeF(210, 297) >> internal size >> QSizeF(210, 297) >> kipi.plugins: Dialog exit, new margins: left 0 right 0 >> top 0 >> bottom 0 >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> >> Stuart >> >> >> On 16/08/16 00:06, Andrew Goodbody wrote: >> >> I can see this bug on Debian Testing as well. >> >> Messages from the console are: >> >> kipi.plugins: 0x4c219d8 >> kipi.plugins: printers: 1 >> kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" >> kipi.plugins: current "Select page layout" >> kipi.plugins: "Select page layout" >> kipi.plugins: New page size QSizeF(210, 297) , old page >> size >> QSizeF(-1, >> -1) >> kipi.plugins: d->m_photoSizes.count()= 0 >> kipi.plugins: d->m_photoSizes.isEmpty()= true >> kipi.plugins: Empty photoSize-list, create default size >> >> I'm guessing that perhaps in parsing the templates.xml >> file it >> looks for >> a paper size of 210x297 and fails to match against the >> A4 size of >> 210.0x297.0? >> >> That does not explain why the selection of a different >> paper size or >> orientation does not stick though. >> >> Andrew >> >> On 13/08/16 10:21, Gilles Caulier wrote: >> >> >> >> 2016-08-13 11:07 GMT+02:00 Stuart T Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>: >> >> Can anyone here please let me know whether or >> not they >> see this >> issue? I am getting nowhere trying to figure >> out why >> this does not >> work for me in V5 but does in 4.14 on the same >> openSUSE >> Tumbleweed >> system. I'd like to try and work out if this is >> a bug in >> the Print >> Assistant or if it is something to do with the >> openSUSE >> implementation/compilation. I must point out >> that Print >> Images also >> fails >> >> No idea about OpenSuse. >> >> If it work with 4.x and not 5.x, i suspect something >> different with Qt5 >> about Print interface and the way to handle printer >> features/configuration. >> >> The tools have been ported as well from Qt4 to Qt5. >> Nothing >> have been >> removed especially. >> >> >> >> I assume the Print Assistant is part of the Kipi >> Plugins >> which are >> at V5.1.0 and digiKam itself is 5.1.0. >> >> >> yes it is... >> >> Gilles Caulier >> >> >> >> Stuart >> >> >> On 10/08/16 10:32, Stuart T Rogers wrote: >> >> I have been doing some more on this. When I >> start >> the Print >> Assistant I >> see two lines in the top left box, one saying >> Unsupported Paper >> Size and >> a second line saying Custom and that's it, no >> templates at all. >> >> I can see the templates.xml file in >> /usr/share/kipiplugin_printimages/templates/ >> and it >> seems to >> contain >> what it should and I've checked the >> permissions and >> all files are >> publicly readable. I do not have my own >> templates >> file in my home >> directory. Surely I should see the templates >> from >> this file when >> I start >> the Print Assistant. I think I need to fix >> this >> before trying to >> progress further. >> >> Also found that I am unable to change >> orientation >> between >> portrait and >> landscape, it changes on the dialog but when >> I OK it >> and go back >> into >> the dialog portrait is still selected. >> >> Stuart >> >> On 06/08/16 06:42, Gilles Caulier wrote: >> >> Well the driver for Qt application pass >> through >> the Qt5Print >> interface. >> The problem must be located in Qt5... >> >> Gilles Caulier >> >> 2016-08-04 23:01 GMT+02:00 Stuart T >> Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>>: >> >> Further testing shows that the >> printer >> driver works >> perfectly with >> darktable and shotwell as well as >> Gimp. It >> only fails >> using digikam, >> showfoto and gwenview. >> >> Stuart >> >> >> On 04/08/16 20:07, Stuart T Rogers >> wrote: >> >> Gilles >> >> I will check that out but all I >> can say >> is the >> driver works >> perfectly in >> V4.14 of digikam, and in other >> programs. >> It shows >> the papaer >> sizes but >> will not allow me to select >> them, it >> still leaves >> the previous >> setting >> when I click on the photo paper >> size I want. >> >> Stuart >> >> On 04/08/16 11:06, Gilles >> Caulier wrote: >> >> In Print assistant, there >> are few config >> template files >> which define >> paper layout to use with >> printers (if i >> remember)... >> >> Look here for details : >> >> >> >> >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>> >> >> >> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>>> >> >> >> >> >> >> But, i feel that your >> printer driver >> is not >> complete and do >> not provide >> all device information to >> use in >> high level side. >> >> Gilles Caulier >> >> >> 2016-08-03 18:46 GMT+02:00 >> Stuart T >> Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>>>: >> >> I have just tried to >> print a >> photo from >> digikam using >> the Print >> Assistant and found that >> I am >> unable to >> select some of >> the paper >> sizes supported by my >> printer, a >> Canon >> IP7250. I can >> load most of >> the normal A4 type and >> Envelope >> sizes but it >> will not >> select 5x7 >> Borderless when I click >> on it, >> which is what >> I wanted to >> use. >> >> I have used Gimp to >> print the >> photo now as I >> wanted but >> still cannot >> get it to allow that >> size either >> in the >> Print Assistant >> or just >> Print Images. >> >> Anyone any ideas please? >> >> Stuart >> -- >> Website: >> http://www.stella-maris.org.uk >> or: >> http://www.broadstairs.org >> >> _______________________________________________ >> Digikam-users mailing >> list >> [hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> <mailto:[hidden email] <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>> >> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>>> >> >> >> >> >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >> >> >> >> -- >> Website: >> http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
In reply to this post by Gilles Caulier-4
(gdb) n
653 const QStringList list = QStandardPaths::locateAll(QStandardPaths::GenericDataLocation, QLatin1String("kipiplugin_printimages/templates/*.xml")); (gdb) n 655 foreach(const QString& fn, list) (gdb) p list $4 = {<QList<QString>> = {<QListSpecialMethods<QString>> = {<No data fields>}, {p = {static shared_null = {ref = {atomic = { _q_value = {<std::__atomic_base<int>> = {static _S_alignment = 4, _M_i = -1}, <No data fields>}}}, alloc = 0, begin = 0, end = 0, array = {0x0}}, d = 0x7fffe9ac3e00 <QListData::shared_null>}, d = 0x7fffe9ac3e00 <QListData::shared_null>}}, <No data fields>} (gdb) So it is failing to find the templates file, however that exists at $ find /usr/share/kipiplugin_printimages/templates/ -name templates.xml /usr/share/kipiplugin_printimages/templates/templates.xml So this is probably bad news (gdb) p QStandardPaths::standardLocations(QStandardPaths::GenericDataLocation) $9 = {<QList<QString>> = {<QListSpecialMethods<QString>> = {<No data fields>}, {p = {static shared_null = {ref = {atomic = { _q_value = {<std::__atomic_base<int>> = {static _S_alignment = 4, _M_i = -1}, <No data fields>}}}, alloc = 0, begin = 0, end = 0, array = {0x0}}, d = 0x5a4f660}, d = 0x5a4f660}}, <No data fields>} (gdb) It seems like QStandardPaths::GenericDataLocation is not returning the paths that is should. However qtdiag shows the correct entries, so I have no idea what is going on here. Andrew On 19/08/16 11:31, Gilles Caulier wrote: > yes sure. But what it expected to see in this trace as dysfonctions ? > > The trace are generated by qCDebug in C++ source, located in kipiplugin > tool. Code is here if you xant to take a look : > > https://quickgit.kde.org/?p=kipi-plugins.git&a=tree&f=printimages > > Gilles Caulier > > > > 2016-08-19 11:48 GMT+02:00 Stuart T Rogers <[hidden email] > <mailto:[hidden email]>>: > > This is the console messages from the point at which I start the > Print Assitant to the point at which I close the Assistant. I have > the whole trace from start to finish of running digikam but > searching through it all this is all the messages which come up > while running the Assitant, the only other mention of printing is > where it loads the PrintImagesUI. The last couple of lines appear > when trying to change paper size from A4 to 6x4 which does not work. > > On 19/08/16 10:22, Gilles Caulier wrote: > > Where is the problem exactly in this debug trace from the console ? > > Gilles Caulier > > 2016-08-19 11:18 GMT+02:00 Stuart T Rogers > <[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>: > > > I have run digikam from a console and see these messages > when trying > to use the Print Assistant. Can anyone here please help in > fixing > this? I am more than happy to do some testing but need some > advice > on how to proceed. > > kipi.plugins: printers: 1 > kipi.plugins: printer: "iP7200series-TurboPrint" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(-1, -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > digikam.dimg: > "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : > JPEG file identified > digikam.metaengine: Loading image history "" > digikam.metaengine: DateTime => Exif.Photo.DateTimeOriginal => > QDateTime(2015-12-26 16:41:57.000 GMT Qt::TimeSpec(LocalTime)) > digikam.metaengine: Exif color-space tag is sRGB. Using > default sRGB > ICC profile. > digikam.metaengine: Orientation => Exif.Image.Orientation => 1 > kipi.plugins: Creating new ImageListViewItem with url > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for list view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: "Select page layout" > kipi.plugins: before "Select page layout" > kipi.plugins: current "Select page layout" > kipi.plugins: Creating new ImageListViewItem with url > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for list view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: Request to update thumbnail for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Request to update thumbnail for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Update thumb in list for > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > kipi.plugins: Received new thumbnail for url > > QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") > for view KIPIPlugins::KPImagesListView(0x482c7b0) > kipi.plugins: Chosen printer: "iP7200series-TurboPrint" > kipi.plugins: Dialog exit, new size QSizeF(210, 297) > internal size > QSizeF(210, 297) > kipi.plugins: Dialog exit, new margins: left 0 right 0 > top 0 > bottom 0 > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > kipi.plugins: New page size QSizeF(210, 297) , old page size > QSizeF(210, 297) > > Stuart > > > On 16/08/16 00:06, Andrew Goodbody wrote: > > I can see this bug on Debian Testing as well. > > Messages from the console are: > > kipi.plugins: 0x4c219d8 > kipi.plugins: printers: 1 > kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" > kipi.plugins: current "Select page layout" > kipi.plugins: "Select page layout" > kipi.plugins: New page size QSizeF(210, 297) , old page > size > QSizeF(-1, > -1) > kipi.plugins: d->m_photoSizes.count()= 0 > kipi.plugins: d->m_photoSizes.isEmpty()= true > kipi.plugins: Empty photoSize-list, create default size > > I'm guessing that perhaps in parsing the templates.xml > file it > looks for > a paper size of 210x297 and fails to match against the > A4 size of > 210.0x297.0? > > That does not explain why the selection of a different > paper size or > orientation does not stick though. > > Andrew > > On 13/08/16 10:21, Gilles Caulier wrote: > > > > 2016-08-13 11:07 GMT+02:00 Stuart T Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > > <mailto:[hidden email] > <mailto:[hidden email]>>>>: > > Can anyone here please let me know whether or > not they > see this > issue? I am getting nowhere trying to figure out why > this does not > work for me in V5 but does in 4.14 on the same > openSUSE > Tumbleweed > system. I'd like to try and work out if this is > a bug in > the Print > Assistant or if it is something to do with the > openSUSE > implementation/compilation. I must point out > that Print > Images also > fails > > No idea about OpenSuse. > > If it work with 4.x and not 5.x, i suspect something > different with Qt5 > about Print interface and the way to handle printer > features/configuration. > > The tools have been ported as well from Qt4 to Qt5. > Nothing > have been > removed especially. > > > > I assume the Print Assistant is part of the Kipi > Plugins > which are > at V5.1.0 and digiKam itself is 5.1.0. > > > yes it is... > > Gilles Caulier > > > > Stuart > > > On 10/08/16 10:32, Stuart T Rogers wrote: > > I have been doing some more on this. When I > start > the Print > Assistant I > see two lines in the top left box, one saying > Unsupported Paper > Size and > a second line saying Custom and that's it, no > templates at all. > > I can see the templates.xml file in > /usr/share/kipiplugin_printimages/templates/ > and it > seems to > contain > what it should and I've checked the > permissions and > all files are > publicly readable. I do not have my own > templates > file in my home > directory. Surely I should see the templates > from > this file when > I start > the Print Assistant. I think I need to fix this > before trying to > progress further. > > Also found that I am unable to change > orientation > between > portrait and > landscape, it changes on the dialog but when > I OK it > and go back > into > the dialog portrait is still selected. > > Stuart > > On 06/08/16 06:42, Gilles Caulier wrote: > > Well the driver for Qt application pass > through > the Qt5Print > interface. > The problem must be located in Qt5... > > Gilles Caulier > > 2016-08-04 23:01 GMT+02:00 Stuart T Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>>: > > Further testing shows that the printer > driver works > perfectly with > darktable and shotwell as well as > Gimp. It > only fails > using digikam, > showfoto and gwenview. > > Stuart > > > On 04/08/16 20:07, Stuart T Rogers > wrote: > > Gilles > > I will check that out but all I > can say > is the > driver works > perfectly in > V4.14 of digikam, and in other > programs. > It shows > the papaer > sizes but > will not allow me to select them, it > still leaves > the previous > setting > when I click on the photo paper > size I want. > > Stuart > > On 04/08/16 11:06, Gilles > Caulier wrote: > > In Print assistant, there > are few config > template files > which define > paper layout to use with > printers (if i > remember)... > > Look here for details : > > > > > https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>> > > > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> > > > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> > > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO > <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>>> > > > > > But, i feel that your > printer driver > is not > complete and do > not provide > all device information to use in > high level side. > > Gilles Caulier > > > 2016-08-03 18:46 GMT+02:00 > Stuart T > Rogers > <[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>>>: > > I have just tried to print a > photo from > digikam using > the Print > Assistant and found that > I am > unable to > select some of > the paper > sizes supported by my > printer, a > Canon > IP7250. I can > load most of > the normal A4 type and > Envelope > sizes but it > will not > select 5x7 > Borderless when I click > on it, > which is what > I wanted to > use. > > I have used Gimp to > print the > photo now as I > wanted but > still cannot > get it to allow that > size either > in the > Print Assistant > or just > Print Images. > > Anyone any ideas please? > > Stuart > -- > Website: > http://www.stella-maris.org.uk > or: > http://www.broadstairs.org > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > <mailto:[hidden email] <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>>> > > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>>> > > > > > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> <mailto:[hidden email] > <mailto:[hidden email]>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > _______________________________________________ > Digikam-users mailing list > [hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>> > <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>> <mailto:[hidden email] > <mailto:[hidden email]> > <mailto:[hidden email] > <mailto:[hidden email]>>>> > > https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>> > > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users> > <https://mail.kde.org/mailman/listinfo/digikam-users > <https://mail.kde.org/mailman/listinfo/digikam-users>>>> > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > > > -- > Website: http://www.stella-maris.org.uk > or: http://www.broadstairs.org > > |
|
|
Having done some more testing I now find that I am unable to select all
paper sizes using the Kate editor which also uses QT5 printing, so this is starting to look very much like a QT5 issue. In my case QT5 is V5.6.1 on openSUSE Tumbleweed. Stuart On 20/08/16 00:06, Andrew Goodbody wrote: > (gdb) n > 653 const QStringList list = > QStandardPaths::locateAll(QStandardPaths::GenericDataLocation, > QLatin1String("kipiplugin_printimages/templates/*.xml")); > (gdb) n > 655 foreach(const QString& fn, list) > (gdb) p list > $4 = {<QList<QString>> = {<QListSpecialMethods<QString>> = {<No data > fields>}, {p = {static shared_null = {ref = {atomic = { > _q_value = {<std::__atomic_base<int>> = {static > _S_alignment = 4, _M_i = -1}, <No data fields>}}}, alloc = 0, > begin = 0, end = 0, array = {0x0}}, d = 0x7fffe9ac3e00 > <QListData::shared_null>}, > d = 0x7fffe9ac3e00 <QListData::shared_null>}}, <No data fields>} > (gdb) > > So it is failing to find the templates file, however that exists at > > $ find /usr/share/kipiplugin_printimages/templates/ -name templates.xml > /usr/share/kipiplugin_printimages/templates/templates.xml > > So this is probably bad news > > (gdb) p > QStandardPaths::standardLocations(QStandardPaths::GenericDataLocation) > $9 = {<QList<QString>> = {<QListSpecialMethods<QString>> = {<No data > fields>}, {p = {static shared_null = {ref = {atomic = { > _q_value = {<std::__atomic_base<int>> = {static > _S_alignment = 4, _M_i = -1}, <No data fields>}}}, alloc = 0, > begin = 0, end = 0, array = {0x0}}, d = 0x5a4f660}, d = > 0x5a4f660}}, <No data fields>} > (gdb) > > It seems like QStandardPaths::GenericDataLocation is not returning the > paths that is should. However qtdiag shows the correct entries, so I > have no idea what is going on here. > > Andrew > > On 19/08/16 11:31, Gilles Caulier wrote: >> yes sure. But what it expected to see in this trace as dysfonctions ? >> >> The trace are generated by qCDebug in C++ source, located in kipiplugin >> tool. Code is here if you xant to take a look : >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=tree&f=printimages >> >> Gilles Caulier >> >> >> >> 2016-08-19 11:48 GMT+02:00 Stuart T Rogers <[hidden email] >> <mailto:[hidden email]>>: >> >> This is the console messages from the point at which I start the >> Print Assitant to the point at which I close the Assistant. I have >> the whole trace from start to finish of running digikam but >> searching through it all this is all the messages which come up >> while running the Assitant, the only other mention of printing is >> where it loads the PrintImagesUI. The last couple of lines appear >> when trying to change paper size from A4 to 6x4 which does not work. >> >> On 19/08/16 10:22, Gilles Caulier wrote: >> >> Where is the problem exactly in this debug trace from the >> console ? >> >> Gilles Caulier >> >> 2016-08-19 11:18 GMT+02:00 Stuart T Rogers >> <[hidden email] <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>: >> >> >> I have run digikam from a console and see these messages >> when trying >> to use the Print Assistant. Can anyone here please help in >> fixing >> this? I am more than happy to do some testing but need some >> advice >> on how to proceed. >> >> kipi.plugins: printers: 1 >> kipi.plugins: printer: "iP7200series-TurboPrint" >> kipi.plugins: current "Select page layout" >> kipi.plugins: "Select page layout" >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(-1, -1) >> kipi.plugins: d->m_photoSizes.count()= 0 >> kipi.plugins: d->m_photoSizes.isEmpty()= true >> kipi.plugins: Empty photoSize-list, create default size >> >> digikam.dimg: >> >> "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : >> JPEG file identified >> digikam.metaengine: Loading image history "" >> digikam.metaengine: DateTime => >> Exif.Photo.DateTimeOriginal => >> QDateTime(2015-12-26 16:41:57.000 GMT >> Qt::TimeSpec(LocalTime)) >> digikam.metaengine: Exif color-space tag is sRGB. Using >> default sRGB >> ICC profile. >> digikam.metaengine: Orientation => Exif.Image.Orientation >> => 1 >> kipi.plugins: Creating new ImageListViewItem with url >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> for list view KIPIPlugins::KPImagesListView(0x482c7b0) >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> kipi.plugins: "Select page layout" >> kipi.plugins: before "Select page layout" >> kipi.plugins: current "Select page layout" >> kipi.plugins: Creating new ImageListViewItem with url >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> for list view KIPIPlugins::KPImagesListView(0x482c7b0) >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> kipi.plugins: Request to update thumbnail for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: Request to update thumbnail for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: Update thumb in list for >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> kipi.plugins: Received new thumbnail for url >> >> >> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >> >> for view KIPIPlugins::KPImagesListView(0x482c7b0) >> kipi.plugins: Chosen printer: "iP7200series-TurboPrint" >> kipi.plugins: Dialog exit, new size QSizeF(210, 297) >> internal size >> QSizeF(210, 297) >> kipi.plugins: Dialog exit, new margins: left 0 right 0 >> top 0 >> bottom 0 >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> kipi.plugins: New page size QSizeF(210, 297) , old page size >> QSizeF(210, 297) >> >> Stuart >> >> >> On 16/08/16 00:06, Andrew Goodbody wrote: >> >> I can see this bug on Debian Testing as well. >> >> Messages from the console are: >> >> kipi.plugins: 0x4c219d8 >> kipi.plugins: printers: 1 >> kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" >> kipi.plugins: current "Select page layout" >> kipi.plugins: "Select page layout" >> kipi.plugins: New page size QSizeF(210, 297) , old page >> size >> QSizeF(-1, >> -1) >> kipi.plugins: d->m_photoSizes.count()= 0 >> kipi.plugins: d->m_photoSizes.isEmpty()= true >> kipi.plugins: Empty photoSize-list, create default size >> >> I'm guessing that perhaps in parsing the templates.xml >> file it >> looks for >> a paper size of 210x297 and fails to match against the >> A4 size of >> 210.0x297.0? >> >> That does not explain why the selection of a different >> paper size or >> orientation does not stick though. >> >> Andrew >> >> On 13/08/16 10:21, Gilles Caulier wrote: >> >> >> >> 2016-08-13 11:07 GMT+02:00 Stuart T Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>: >> >> Can anyone here please let me know whether or >> not they >> see this >> issue? I am getting nowhere trying to figure >> out why >> this does not >> work for me in V5 but does in 4.14 on the same >> openSUSE >> Tumbleweed >> system. I'd like to try and work out if this is >> a bug in >> the Print >> Assistant or if it is something to do with the >> openSUSE >> implementation/compilation. I must point out >> that Print >> Images also >> fails >> >> No idea about OpenSuse. >> >> If it work with 4.x and not 5.x, i suspect something >> different with Qt5 >> about Print interface and the way to handle printer >> features/configuration. >> >> The tools have been ported as well from Qt4 to Qt5. >> Nothing >> have been >> removed especially. >> >> >> >> I assume the Print Assistant is part of the Kipi >> Plugins >> which are >> at V5.1.0 and digiKam itself is 5.1.0. >> >> >> yes it is... >> >> Gilles Caulier >> >> >> >> Stuart >> >> >> On 10/08/16 10:32, Stuart T Rogers wrote: >> >> I have been doing some more on this. When I >> start >> the Print >> Assistant I >> see two lines in the top left box, one saying >> Unsupported Paper >> Size and >> a second line saying Custom and that's it, no >> templates at all. >> >> I can see the templates.xml file in >> /usr/share/kipiplugin_printimages/templates/ >> and it >> seems to >> contain >> what it should and I've checked the >> permissions and >> all files are >> publicly readable. I do not have my own >> templates >> file in my home >> directory. Surely I should see the templates >> from >> this file when >> I start >> the Print Assistant. I think I need to fix >> this >> before trying to >> progress further. >> >> Also found that I am unable to change >> orientation >> between >> portrait and >> landscape, it changes on the dialog but when >> I OK it >> and go back >> into >> the dialog portrait is still selected. >> >> Stuart >> >> On 06/08/16 06:42, Gilles Caulier wrote: >> >> Well the driver for Qt application pass >> through >> the Qt5Print >> interface. >> The problem must be located in Qt5... >> >> Gilles Caulier >> >> 2016-08-04 23:01 GMT+02:00 Stuart T >> Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>>: >> >> Further testing shows that the >> printer >> driver works >> perfectly with >> darktable and shotwell as well as >> Gimp. It >> only fails >> using digikam, >> showfoto and gwenview. >> >> Stuart >> >> >> On 04/08/16 20:07, Stuart T Rogers >> wrote: >> >> Gilles >> >> I will check that out but all I >> can say >> is the >> driver works >> perfectly in >> V4.14 of digikam, and in other >> programs. >> It shows >> the papaer >> sizes but >> will not allow me to select >> them, it >> still leaves >> the previous >> setting >> when I click on the photo paper >> size I want. >> >> Stuart >> >> On 04/08/16 11:06, Gilles >> Caulier wrote: >> >> In Print assistant, there >> are few config >> template files >> which define >> paper layout to use with >> printers (if i >> remember)... >> >> Look here for details : >> >> >> >> >> >> https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>> >> >> >> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >> >> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >> >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >> >> >> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>>> >> >> >> >> >> >> But, i feel that your >> printer driver >> is not >> complete and do >> not provide >> all device information to >> use in >> high level side. >> >> Gilles Caulier >> >> >> 2016-08-03 18:46 GMT+02:00 >> Stuart T >> Rogers >> <[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>>>: >> >> I have just tried to >> print a >> photo from >> digikam using >> the Print >> Assistant and found that >> I am >> unable to >> select some of >> the paper >> sizes supported by my >> printer, a >> Canon >> IP7250. I can >> load most of >> the normal A4 type and >> Envelope >> sizes but it >> will not >> select 5x7 >> Borderless when I click >> on it, >> which is what >> I wanted to >> use. >> >> I have used Gimp to >> print the >> photo now as I >> wanted but >> still cannot >> get it to allow that >> size either >> in the >> Print Assistant >> or just >> Print Images. >> >> Anyone any ideas please? >> >> Stuart >> -- >> Website: >> http://www.stella-maris.org.uk >> or: >> http://www.broadstairs.org >> >> _______________________________________________ >> Digikam-users mailing >> list >> [hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> <mailto:[hidden email] <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>>> >> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>>> >> >> >> >> >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> <mailto:[hidden email] >> <mailto:[hidden email]>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >> >> >> >> -- >> Website: >> http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> _______________________________________________ >> Digikam-users mailing list >> [hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>> >> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>> <mailto:[hidden email] >> <mailto:[hidden email]> >> <mailto:[hidden email] >> <mailto:[hidden email]>>>> >> >> https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>> >> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users> >> <https://mail.kde.org/mailman/listinfo/digikam-users >> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> >> >> -- >> Website: http://www.stella-maris.org.uk >> or: http://www.broadstairs.org >> >> > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
There is 2 parts in print assistant where template files are parsed in system : Line 545 and line 653 Both use QStandardPaths::GenericDataLocation to find templates files. With this commit, i print on the console the result of search : Please git pull and recompile. Let's me see the results printed on the console. Gilles Caulier 2016-08-21 8:43 GMT+02:00 Stuart T Rogers <[hidden email]>: Having done some more testing I now find that I am unable to select all paper sizes using the Kate editor which also uses QT5 printing, so this is starting to look very much like a QT5 issue. In my case QT5 is V5.6.1 on openSUSE Tumbleweed. |
|
|
In reply to this post by Stuart T Rogers
I have today reported a bug to openSUSE (#994809 in bugzilla) for the
issue of paper sizes not being selectable as this issue does affect more than just digikam. However I am not yet convinced that the issue of the missing templates in the Print Assistant is clear enough yet and I'm hoping Andrew Goodbody may be able to progress this issue and help decide whether this is a programming error in the Print Assistant of another QT5 bug. Stuart On 21/08/16 07:43, Stuart T Rogers wrote: > Having done some more testing I now find that I am unable to select all > paper sizes using the Kate editor which also uses QT5 printing, so this > is starting to look very much like a QT5 issue. In my case QT5 is V5.6.1 > on openSUSE Tumbleweed. > > Stuart > > On 20/08/16 00:06, Andrew Goodbody wrote: >> (gdb) n >> 653 const QStringList list = >> QStandardPaths::locateAll(QStandardPaths::GenericDataLocation, >> QLatin1String("kipiplugin_printimages/templates/*.xml")); >> (gdb) n >> 655 foreach(const QString& fn, list) >> (gdb) p list >> $4 = {<QList<QString>> = {<QListSpecialMethods<QString>> = {<No data >> fields>}, {p = {static shared_null = {ref = {atomic = { >> _q_value = {<std::__atomic_base<int>> = {static >> _S_alignment = 4, _M_i = -1}, <No data fields>}}}, alloc = 0, >> begin = 0, end = 0, array = {0x0}}, d = 0x7fffe9ac3e00 >> <QListData::shared_null>}, >> d = 0x7fffe9ac3e00 <QListData::shared_null>}}, <No data fields>} >> (gdb) >> >> So it is failing to find the templates file, however that exists at >> >> $ find /usr/share/kipiplugin_printimages/templates/ -name templates.xml >> /usr/share/kipiplugin_printimages/templates/templates.xml >> >> So this is probably bad news >> >> (gdb) p >> QStandardPaths::standardLocations(QStandardPaths::GenericDataLocation) >> $9 = {<QList<QString>> = {<QListSpecialMethods<QString>> = {<No data >> fields>}, {p = {static shared_null = {ref = {atomic = { >> _q_value = {<std::__atomic_base<int>> = {static >> _S_alignment = 4, _M_i = -1}, <No data fields>}}}, alloc = 0, >> begin = 0, end = 0, array = {0x0}}, d = 0x5a4f660}, d = >> 0x5a4f660}}, <No data fields>} >> (gdb) >> >> It seems like QStandardPaths::GenericDataLocation is not returning the >> paths that is should. However qtdiag shows the correct entries, so I >> have no idea what is going on here. >> >> Andrew >> >> On 19/08/16 11:31, Gilles Caulier wrote: >>> yes sure. But what it expected to see in this trace as dysfonctions ? >>> >>> The trace are generated by qCDebug in C++ source, located in kipiplugin >>> tool. Code is here if you xant to take a look : >>> >>> https://quickgit.kde.org/?p=kipi-plugins.git&a=tree&f=printimages >>> >>> Gilles Caulier >>> >>> >>> >>> 2016-08-19 11:48 GMT+02:00 Stuart T Rogers <[hidden email] >>> <mailto:[hidden email]>>: >>> >>> This is the console messages from the point at which I start the >>> Print Assitant to the point at which I close the Assistant. I have >>> the whole trace from start to finish of running digikam but >>> searching through it all this is all the messages which come up >>> while running the Assitant, the only other mention of printing is >>> where it loads the PrintImagesUI. The last couple of lines appear >>> when trying to change paper size from A4 to 6x4 which does not work. >>> >>> On 19/08/16 10:22, Gilles Caulier wrote: >>> >>> Where is the problem exactly in this debug trace from the >>> console ? >>> >>> Gilles Caulier >>> >>> 2016-08-19 11:18 GMT+02:00 Stuart T Rogers >>> <[hidden email] <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>: >>> >>> >>> I have run digikam from a console and see these messages >>> when trying >>> to use the Print Assistant. Can anyone here please help in >>> fixing >>> this? I am more than happy to do some testing but need some >>> advice >>> on how to proceed. >>> >>> kipi.plugins: printers: 1 >>> kipi.plugins: printer: "iP7200series-TurboPrint" >>> kipi.plugins: current "Select page layout" >>> kipi.plugins: "Select page layout" >>> kipi.plugins: New page size QSizeF(210, 297) , old page >>> size >>> QSizeF(-1, -1) >>> kipi.plugins: d->m_photoSizes.count()= 0 >>> kipi.plugins: d->m_photoSizes.isEmpty()= true >>> kipi.plugins: Empty photoSize-list, create default size >>> >>> digikam.dimg: >>> >>> "/home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG" : >>> JPEG file identified >>> digikam.metaengine: Loading image history "" >>> digikam.metaengine: DateTime => >>> Exif.Photo.DateTimeOriginal => >>> QDateTime(2015-12-26 16:41:57.000 GMT >>> Qt::TimeSpec(LocalTime)) >>> digikam.metaengine: Exif color-space tag is sRGB. Using >>> default sRGB >>> ICC profile. >>> digikam.metaengine: Orientation => Exif.Image.Orientation >>> => 1 >>> kipi.plugins: Creating new ImageListViewItem with url >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> for list view KIPIPlugins::KPImagesListView(0x482c7b0) >>> kipi.plugins: New page size QSizeF(210, 297) , old page >>> size >>> QSizeF(210, 297) >>> kipi.plugins: "Select page layout" >>> kipi.plugins: before "Select page layout" >>> kipi.plugins: current "Select page layout" >>> kipi.plugins: Creating new ImageListViewItem with url >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> for list view KIPIPlugins::KPImagesListView(0x482c7b0) >>> kipi.plugins: New page size QSizeF(210, 297) , old page >>> size >>> QSizeF(210, 297) >>> kipi.plugins: Request to update thumbnail for >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> kipi.plugins: Request to update thumbnail for >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> kipi.plugins: KIPI host send thumb ( QSize(169, 256) ) for >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> kipi.plugins: Update thumb in list for >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> kipi.plugins: Received new thumbnail for url >>> >>> >>> QUrl("file:///home/stuart/Work/Graphics/Pentax-K500/2015/12/IMGP7556.JPG") >>> >>> >>> for view KIPIPlugins::KPImagesListView(0x482c7b0) >>> kipi.plugins: Chosen printer: "iP7200series-TurboPrint" >>> kipi.plugins: Dialog exit, new size QSizeF(210, 297) >>> internal size >>> QSizeF(210, 297) >>> kipi.plugins: Dialog exit, new margins: left 0 right 0 >>> top 0 >>> bottom 0 >>> kipi.plugins: New page size QSizeF(210, 297) , old page >>> size >>> QSizeF(210, 297) >>> kipi.plugins: New page size QSizeF(210, 297) , old page >>> size >>> QSizeF(210, 297) >>> >>> Stuart >>> >>> >>> On 16/08/16 00:06, Andrew Goodbody wrote: >>> >>> I can see this bug on Debian Testing as well. >>> >>> Messages from the console are: >>> >>> kipi.plugins: 0x4c219d8 >>> kipi.plugins: printers: 1 >>> kipi.plugins: printer: "EPSON-Epson-Stylus-SX420W" >>> kipi.plugins: current "Select page layout" >>> kipi.plugins: "Select page layout" >>> kipi.plugins: New page size QSizeF(210, 297) , old page >>> size >>> QSizeF(-1, >>> -1) >>> kipi.plugins: d->m_photoSizes.count()= 0 >>> kipi.plugins: d->m_photoSizes.isEmpty()= true >>> kipi.plugins: Empty photoSize-list, create default size >>> >>> I'm guessing that perhaps in parsing the templates.xml >>> file it >>> looks for >>> a paper size of 210x297 and fails to match against the >>> A4 size of >>> 210.0x297.0? >>> >>> That does not explain why the selection of a different >>> paper size or >>> orientation does not stick though. >>> >>> Andrew >>> >>> On 13/08/16 10:21, Gilles Caulier wrote: >>> >>> >>> >>> 2016-08-13 11:07 GMT+02:00 Stuart T Rogers >>> <[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>>: >>> >>> Can anyone here please let me know whether or >>> not they >>> see this >>> issue? I am getting nowhere trying to figure >>> out why >>> this does not >>> work for me in V5 but does in 4.14 on the same >>> openSUSE >>> Tumbleweed >>> system. I'd like to try and work out if this is >>> a bug in >>> the Print >>> Assistant or if it is something to do with the >>> openSUSE >>> implementation/compilation. I must point out >>> that Print >>> Images also >>> fails >>> >>> No idea about OpenSuse. >>> >>> If it work with 4.x and not 5.x, i suspect something >>> different with Qt5 >>> about Print interface and the way to handle printer >>> features/configuration. >>> >>> The tools have been ported as well from Qt4 to Qt5. >>> Nothing >>> have been >>> removed especially. >>> >>> >>> >>> I assume the Print Assistant is part of the Kipi >>> Plugins >>> which are >>> at V5.1.0 and digiKam itself is 5.1.0. >>> >>> >>> yes it is... >>> >>> Gilles Caulier >>> >>> >>> >>> Stuart >>> >>> >>> On 10/08/16 10:32, Stuart T Rogers wrote: >>> >>> I have been doing some more on this. When I >>> start >>> the Print >>> Assistant I >>> see two lines in the top left box, one >>> saying >>> Unsupported Paper >>> Size and >>> a second line saying Custom and that's >>> it, no >>> templates at all. >>> >>> I can see the templates.xml file in >>> /usr/share/kipiplugin_printimages/templates/ >>> and it >>> seems to >>> contain >>> what it should and I've checked the >>> permissions and >>> all files are >>> publicly readable. I do not have my own >>> templates >>> file in my home >>> directory. Surely I should see the templates >>> from >>> this file when >>> I start >>> the Print Assistant. I think I need to fix >>> this >>> before trying to >>> progress further. >>> >>> Also found that I am unable to change >>> orientation >>> between >>> portrait and >>> landscape, it changes on the dialog but when >>> I OK it >>> and go back >>> into >>> the dialog portrait is still selected. >>> >>> Stuart >>> >>> On 06/08/16 06:42, Gilles Caulier wrote: >>> >>> Well the driver for Qt application pass >>> through >>> the Qt5Print >>> interface. >>> The problem must be located in Qt5... >>> >>> Gilles Caulier >>> >>> 2016-08-04 23:01 GMT+02:00 Stuart T >>> Rogers >>> <[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>>>: >>> >>> Further testing shows that the >>> printer >>> driver works >>> perfectly with >>> darktable and shotwell as well as >>> Gimp. It >>> only fails >>> using digikam, >>> showfoto and gwenview. >>> >>> Stuart >>> >>> >>> On 04/08/16 20:07, Stuart T Rogers >>> wrote: >>> >>> Gilles >>> >>> I will check that out but all I >>> can say >>> is the >>> driver works >>> perfectly in >>> V4.14 of digikam, and in other >>> programs. >>> It shows >>> the papaer >>> sizes but >>> will not allow me to select >>> them, it >>> still leaves >>> the previous >>> setting >>> when I click on the photo paper >>> size I want. >>> >>> Stuart >>> >>> On 04/08/16 11:06, Gilles >>> Caulier wrote: >>> >>> In Print assistant, there >>> are few config >>> template files >>> which define >>> paper layout to use with >>> printers (if i >>> remember)... >>> >>> Look here for details : >>> >>> >>> >>> >>> >>> https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >>> >>> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>> >>> >>> >>> >>> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>> >>> >>> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO> >>> >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO >>> >>> >>> >>> <https://quickgit.kde.org/?p=kipi-plugins.git&a=blob&h=9062af87c03cd646299aa35c6e644df21ce7024b&hb=9e52b5a0f27360750598bebf7ac927b0e832a07b&f=printimages%2Ftemplates%2FTEMPLATE_HOWTO>>>> >>> >>> >>> >>> >>> >>> >>> But, i feel that your >>> printer driver >>> is not >>> complete and do >>> not provide >>> all device information to >>> use in >>> high level side. >>> >>> Gilles Caulier >>> >>> >>> 2016-08-03 18:46 GMT+02:00 >>> Stuart T >>> Rogers >>> <[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>> >>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>>>>: >>> >>> I have just tried to >>> print a >>> photo from >>> digikam using >>> the Print >>> Assistant and found that >>> I am >>> unable to >>> select some of >>> the paper >>> sizes supported by my >>> printer, a >>> Canon >>> IP7250. I can >>> load most of >>> the normal A4 type and >>> Envelope >>> sizes but it >>> will not >>> select 5x7 >>> Borderless when I click >>> on it, >>> which is what >>> I wanted to >>> use. >>> >>> I have used Gimp to >>> print the >>> photo now as I >>> wanted but >>> still cannot >>> get it to allow that >>> size either >>> in the >>> Print Assistant >>> or just >>> Print Images. >>> >>> Anyone any ideas please? >>> >>> Stuart >>> -- >>> Website: >>> http://www.stella-maris.org.uk >>> or: >>> http://www.broadstairs.org >>> >>> _______________________________________________ >>> Digikam-users mailing >>> list >>> [hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>> >>> >>> <mailto:[hidden email] <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>>> >>> >>> >>> https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>>>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Digikam-users mailing list >>> [hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> <mailto:[hidden email] >>> <mailto:[hidden email]>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>> >>> >>> >>> https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >>> >>> >>> >>> -- >>> Website: >>> http://www.stella-maris.org.uk >>> or: http://www.broadstairs.org >>> >>> _______________________________________________ >>> Digikam-users mailing list >>> [hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>> >>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>> <mailto:[hidden email] >>> <mailto:[hidden email]> >>> <mailto:[hidden email] >>> <mailto:[hidden email]>>>> >>> >>> https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>> >>> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users> >>> <https://mail.kde.org/mailman/listinfo/digikam-users >>> <https://mail.kde.org/mailman/listinfo/digikam-users>>>> >>> >>> >>> >>> >>> -- >>> Website: http://www.stella-maris.org.uk >>> or: http://www.broadstairs.org >>> >>> >>> >>> >>> -- >>> Website: http://www.stella-maris.org.uk >>> or: http://www.broadstairs.org >>> >>> >>> >>> -- >>> Website: http://www.stella-maris.org.uk >>> or: http://www.broadstairs.org >>> >>> >> > -- Website: http://www.stella-maris.org.uk or: http://www.broadstairs.org |
|
|
I can confirm that template files are not found on my computer : kipi.plugins: Template files list: () Gilles Caulier 2016-08-22 10:39 GMT+02:00 Stuart T Rogers <[hidden email]>: I have today reported a bug to openSUSE (#994809 in bugzilla) for the issue of paper sizes not being selectable as this issue does affect more than just digikam. |
«
Return to digikam-users
|
1 view|%1 views
| Free forum by Nabble | Edit this page |