Linker error compiling 0.9.0-rc1

Hi all,

I know I'm doing something stupid here.  I properly compiled 0.9.0-beta3, but
I'm getting a linker error compiling 0.9.0-rc1.  /usr/lib/libexiv2.so is not
getting found, which makes sense, since I've compiled and installed it
in /usr/local.  It is version 0.11.  Any help would be greatly appreciated!

Paul

$ ls /usr/local/lib/
kde3              libexiv2.la   libpano12.so        libpfs-1.2.a  
libpfs-1.2.so.0      python2.3
libexiv2-0.11.so  libexiv2.so   libpano12.so.0      libpfs-1.2.la  
libpfs-1.2.so.0.0.0  python2.4
libexiv2.a        libpano12.la  libpano12.so.0.0.0  libpfs-1.2.so  pkgconfig
$ export WANT_AUTOCONF_2_5=1
$ export KDEDIR=/usr/local
$ export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:$PKG_CONFIG_PATH
$ ./configure
[...]
config.status: executing depfiles commands

-- digiKam configure results -------------------
-- sqlite3 found.................. YES
-- libgphoto2 found............... YES
-- libkipi found.................. YES
-- libtiff found.................. YES
-- libpng found................... YES
-- lcms found..................... YES
-- Exiv2 library found............ YES
------------------------------------------------

Good - your configure finished. Start make now

$ time make -j 4
[...]
/bin/sh ../../libtool --silent --tag=CXX --mode=link
g++  -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_CLEAN_NAMESPACE    -o
libdigikam.la -rpath /usr/lib -L/usr/lib -L/usr/share/qt3/lib -L/usr/X11R6/lib    -R /usr/lib -R /usr/lib -R /usr/share/qt3/lib -R /usr/X11R6/lib -no-undefined -Wl,--no-undefined -Wl,--allow-shlib-undefined
firstrun.lo albummanager.lo album.lo albumitemhandler.lo albumdb.lo
albumdb_sqlite2.lo albumlister.lo dragobjects.lo iconview.lo icongroupitem.lo
iconitem.lo digikamapp.lo digikamview.lo albumfolderview.lo
albumwidgetstack.lo albumiconview.lo albumicongroupitem.lo albumiconitem.lo
albumpropsedit.lo albumsettings.lo cameralist.lo cameratype.lo
cameradragobject.lo kipiinterface.lo tagcreatedlg.lo albumfiletip.lo
tagspopupmenu.lo syncjob.lo albumhistory.lo scanlib.lo imageinfo.lo
imagepreviewwidget.lo imagepreviewjob.lo datefolderview.lo pixmapmanager.lo
tagfolderview.lo tagfilterview.lo monthwidget.lo searchfolderview.lo dio.lo
searchresultsview.lo searchresultsitem.lo searchquickdialog.lo
searchadvanceddialog.lo searchwidgets.lo kdateedit.lo kdatetimeedit.lo
kdatepickerpopup.lo folderview.lo folderitem.lo upgradedb_sqlite2tosqlite3.lo
ratingwidget.lo digikamfirstrun.lo imageattributeswatch.lo
albumthumbnailloader.lo batchthumbsgenerator.lo dcopiface.lo
dcopiface_skel.lo -lkio -lsqlite3   -lkabc -lkipi   -lkutils -lexiv2 ../../digikam/sqlite/libsqlite.la ../../digikam/libs/thumbbar/libthumbbar.la ../../digikam/libs/themeengine/libthemeengine.la ../../digikam/libs/widgets/libwidgets.la ../../digikam/libs/dialogs/libdialog.la ../../digikam/libs/jpegutils/libjpegutils.la ../../digikam/libs/imageproperties/libimagepropertiesdigikam.la ../../digikam/libs/threadimageio/libthreadimageio.la ../../digikam/utilities/cameragui/libcameragui.la ../../digikam/utilities/imageeditor/canvas/libdimgcanvas.la ../../digikam/utilities/imageeditor/editor/libdimgeditor.la ../../digikam/utilities/splashscreen/libsplashscreen.la ../../digikam/utilities/setup/libsetup.la
g++: /usr/lib/libexiv2.so: No such file or directory
make[3]: *** [libdigikam.la] Error 1
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Fabien-5]

Hi,

Paul Waldo wrote:
> I know I'm doing something stupid here.  I properly compiled 0.9.0-beta3, but
> I'm getting a linker error compiling 0.9.0-rc1.  /usr/lib/libexiv2.so is not
> getting found, which makes sense, since I've compiled and installed it
> in /usr/local.  It is version 0.11.  Any help would be greatly appreciated!

Try to add :
--with-extra-includes --with-extra-libs --prefix
with your values when you start ./configure

> $ ./configure
> [...]

--
Fabien

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

On Thursday 23 November 2006 4:58 am, Fabien wrote:

> Hi,
>
> Paul Waldo wrote:
> > I know I'm doing something stupid here.  I properly compiled 0.9.0-beta3,
> > but I'm getting a linker error compiling 0.9.0-rc1.  /usr/lib/libexiv2.so
> > is not getting found, which makes sense, since I've compiled and
> > installed it in /usr/local.  It is version 0.11.  Any help would be
> > greatly appreciated!
>
> Try to add :
> --with-extra-includes --with-extra-libs --prefix
> with your values when you start ./configure
>
> > $ ./configure
> > [...]
>
> --
> Fabien

 Thanks for the reply, Fabien.  It was a good suggestion, but no luck.  I
still get the error "g++: /usr/lib/libexiv2.so: No such file or directory".  
Here is my configure command:

./configure --with-extra-libs=/usr/local/lib --with-extra-includes=/usr/local/include

I also forgot to mention that I have /usr/local/lib in my LD_LIBRARY_PATH

It looks like it should work, as the link step has the appropriate library
include path:
make[3]: Entering directory
`/home/local_pwaldo/src/graphics/digikam/0.9.0-rc1/digikam-0.9.0-rc1/digikam/digikam'
/bin/sh ../../libtool --silent --tag=CXX --mode=link
g++  -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_CLEAN_NAMESPACE    -o
libdigikam.la -rpath /usr/lib -L/usr/lib -L/usr/share/qt3/lib -L/usr/X11R6/lib    -L/usr/local/lib -R /usr/lib -R /usr/lib -R /usr/share/qt3/lib -R /usr/X11R6/lib -R /usr/local/lib -no-undefined -Wl,--no-undefined -Wl,--allow-shlib-undefined
firstrun.lo albummanager.lo album.lo albumitemhandler.lo albumdb.lo
albumdb_sqlite2.lo albumlister.lo dragobjects.lo iconview.lo icongroupitem.lo
iconitem.lo digikamapp.lo digikamview.lo albumfolderview.lo
albumwidgetstack.lo albumiconview.lo albumicongroupitem.lo albumiconitem.lo
albumpropsedit.lo albumsettings.lo cameralist.lo cameratype.lo
cameradragobject.lo kipiinterface.lo tagcreatedlg.lo albumfiletip.lo
tagspopupmenu.lo syncjob.lo albumhistory.lo scanlib.lo imageinfo.lo
imagepreviewwidget.lo imagepreviewjob.lo datefolderview.lo pixmapmanager.lo
tagfolderview.lo tagfilterview.lo monthwidget.lo searchfolderview.lo dio.lo
searchresultsview.lo searchresultsitem.lo searchquickdialog.lo
searchadvanceddialog.lo searchwidgets.lo kdateedit.lo kdatetimeedit.lo
kdatepickerpopup.lo folderview.lo folderitem.lo upgradedb_sqlite2tosqlite3.lo
ratingwidget.lo digikamfirstrun.lo imageattributeswatch.lo
albumthumbnailloader.lo batchthumbsgenerator.lo dcopiface.lo
dcopiface_skel.lo -lkio -lsqlite3   -lkabc -lkipi   -lkutils -lexiv2 ../../digikam/sqlite/libsqlite.la ../../digikam/libs/thumbbar/libthumbbar.la ../../digikam/libs/themeengine/libthemeengine.la ../../digikam/libs/widgets/libwidgets.la ../../digikam/libs/dialogs/libdialog.la ../../digikam/libs/jpegutils/libjpegutils.la ../../digikam/libs/imageproperties/libimagepropertiesdigikam.la ../../digikam/libs/threadimageio/libthreadimageio.la ../../digikam/utilities/cameragui/libcameragui.la ../../digikam/utilities/imageeditor/canvas/libdimgcanvas.la ../../digikam/utilities/imageeditor/editor/libdimgeditor.la ../../digikam/utilities/splashscreen/libsplashscreen.la ../../digikam/utilities/setup/libsetup.la
g++: /usr/lib/libexiv2.so: No such file or directory

Notice that the command contains "-L/usr/local/lib" and I do have exiv2 there:
$ ls -l /usr/local/lib/libexiv2.*
-rw-r--r-- 1 pwaldo pwaldo 7086898 2006-10-26 08:30 /usr/local/lib/libexiv2.a
-rw-r--r-- 1 pwaldo pwaldo     820 2006-10-26 08:30 /usr/local/lib/libexiv2.la
lrwxrwxrwx 1 pwaldo pwaldo      16 2006-10-26
08:30 /usr/local/lib/libexiv2.so -> libexiv2-0.11.so

I'm dying to try the new digikam, but I'm stuck! :-(

Paul
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Arnd Baecker]

On Thu, 23 Nov 2006, Paul Waldo wrote:
[...]
> g++: /usr/lib/libexiv2.so: No such file or directory
[...]
> Notice that the command contains "-L/usr/local/lib" and I do have exiv2 there:
> $ ls -l /usr/local/lib/libexiv2.*
> -rw-r--r-- 1 pwaldo pwaldo 7086898 2006-10-26 08:30 /usr/local/lib/libexiv2.a
> -rw-r--r-- 1 pwaldo pwaldo     820 2006-10-26 08:30 /usr/local/lib/libexiv2.la
> lrwxrwxrwx 1 pwaldo pwaldo      16 2006-10-26
> 08:30 /usr/local/lib/libexiv2.so -> libexiv2-0.11.so

Do you also have a libexiv2-0.11.so ?
(just to be sure ;-)

> I'm dying to try the new digikam, but I'm stuck! :-(

Could you try to copy and paste the above long compile line into
the shell, but add  -L/usr/local/lib just before -lexiv2 ?

No idea if that could help ...

Best, Arnd

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

On Thursday 23 November 2006 7:59 am, Arnd Baecker wrote:

> On Thu, 23 Nov 2006, Paul Waldo wrote:
> [...]
>
> > g++: /usr/lib/libexiv2.so: No such file or directory
>
> [...]
>
> > Notice that the command contains "-L/usr/local/lib" and I do have exiv2
> > there: $ ls -l /usr/local/lib/libexiv2.*
> > -rw-r--r-- 1 pwaldo pwaldo 7086898 2006-10-26 08:30
> > /usr/local/lib/libexiv2.a -rw-r--r-- 1 pwaldo pwaldo     820 2006-10-26
> > 08:30 /usr/local/lib/libexiv2.la lrwxrwxrwx 1 pwaldo pwaldo      16
> > 2006-10-26
> > 08:30 /usr/local/lib/libexiv2.so -> libexiv2-0.11.so
>
> Do you also have a libexiv2-0.11.so ?
> (just to be sure ;-)
>
> > I'm dying to try the new digikam, but I'm stuck! :-(
>
> Could you try to copy and paste the above long compile line into
> the shell, but add  -L/usr/local/lib just before -lexiv2 ?
>
> No idea if that could help ...
>
> Best, Arnd

I found the problem!  The above suggestion didn't work, but got me to
thinking:
$ ldconfig -p|grep exiv
        libexiv2-0.7.so (libc6) => /usr/lib/libexiv2-0.7.so
$ dpkg -S /usr/lib/libexiv2-0.7.so
libexiv2c2a: /usr/lib/libexiv2-0.7.so
$ sudo apt-get remove libexiv2c2a
[...]
$ sudo ldconfig

Make was then successful!  It was user error :-).  Thanks to all for the help
and suggestions.  Now to play with RC1!!

Paul
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users