Installing digikam 5.3 on Kubuntu 16.04 with KDE 5,8,5 from the backport ppa

[Kai Benndorf]

Hi all,

I just updated my Kubuntu 16.04 installation with KDE 5.8.5 from the
backports ppa.

Afterwards I wanted to update digikam as well and added the philip5 ppa.

On trying to install digikam5 I get the following error message:

apt-get install digikam5
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
      digikam5 : Depends: libmarblewidget-qt5-23 (>= 4:15.12.0) but it
is not going to be installed
E: Unable to correct problems, you have held broken packages.

Are the packages provided by the philip5 ppa currently not be usable
with KDE 5.8.5?

Thanks for any help

Kai

[Gilles Caulier-4]

This is a question for Philips, who is in this room...

From my side, until Philips respond, you can try last digiKam version through the AppImage Linux Bundle, which work fine under Unbuntu. See this section for download :

https://www.digikam.org/download

Gilles Caulier

2017-01-08 12:48 GMT+01:00 Kai Benndorf <[hidden email]>:

Hi all,

I just updated my Kubuntu 16.04 installation with KDE 5.8.5 from the backports ppa.

Afterwards I wanted to update digikam as well and added the philip5 ppa.

On trying to install digikam5 I get the following error message:

apt-get install digikam5
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
     digikam5 : Depends: libmarblewidget-qt5-23 (>= 4:15.12.0) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Are the packages provided by the philip5 ppa currently not be usable with KDE 5.8.5?

Thanks for any help

Kai

[Philip Johnsson]

This error is because of updated version of KDE have been released in some sources from what standard official Ubuntu 16.04 comes with. So if you use the updated version of KDE you need a rebuild version of Digikam 5.x for it (I think Linux Mint have the new KDE version backported). This will be solved with my "kubuntu-backports" PPA for users that have the updated version of KDE and the users that still use the standard ubuntu 16.04 KDE use my "extra" PPA as before. Note that you always need my "extra" PPA as it contains other dependent packages for digikam to work. "kubuntu-backports" PPA will only have some packages rebuilt.

I'm just waiting for official digikam 5.4 tarball to be released to upload the different builds of digikam 5.4 for the different versions of KDE but right now you have to wait a bit for the fix.

/Philip

On Sun, Jan 8, 2017 at 12:48 PM, Kai Benndorf <[hidden email]> wrote:

Hi all,

I just updated my Kubuntu 16.04 installation with KDE 5.8.5 from the backports ppa.

Afterwards I wanted to update digikam as well and added the philip5 ppa.

On trying to install digikam5 I get the following error message:

apt-get install digikam5
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
     digikam5 : Depends: libmarblewidget-qt5-23 (>= 4:15.12.0) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Are the packages provided by the philip5 ppa currently not be usable with KDE 5.8.5?

Thanks for any help

Kai

[Kai Benndorf]

Thanks Philip,

I will try it when available.

Kai

Am 08.01.2017 um 23:35 schrieb Philip Johnsson:

> This error is because of updated version of KDE have been released in
> some sources from what standard official Ubuntu 16.04 comes with. So if
> you use the updated version of KDE you need a rebuild version of Digikam
> 5.x for it (I think Linux Mint have the new KDE version backported).
> This will be solved with my "kubuntu-backports" PPA for users that have
> the updated version of KDE and the users that still use the standard
> ubuntu 16.04 KDE use my "extra" PPA as before. Note that you always need
> my "extra" PPA as it contains other dependent packages for digikam to
> work. "kubuntu-backports" PPA will only have some packages rebuilt.
>
> I'm just waiting for official digikam 5.4 tarball to be released to
> upload the different builds of digikam 5.4 for the different versions of
> KDE but right now you have to wait a bit for the fix.
>
> /Philip
>
>
> On Sun, Jan 8, 2017 at 12:48 PM, Kai Benndorf <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Hi all,
>
>     I just updated my Kubuntu 16.04 installation with KDE 5.8.5 from the
>     backports ppa.
>
>     Afterwards I wanted to update digikam as well and added the philip5 ppa.
>
>     On trying to install digikam5 I get the following error message:
>
>     apt-get install digikam5
>     Reading package lists... Done
>     Building dependency tree
>     Reading state information... Done
>     Some packages could not be installed. This may mean that you have
>     requested an impossible situation or if you are using the unstable
>     distribution that some required packages have not yet been created
>     or been moved out of Incoming.
>     The following information may help to resolve the situation:
>
>     The following packages have unmet dependencies:
>          digikam5 : Depends: libmarblewidget-qt5-23 (>= 4:15.12.0) but
>     it is not going to be installed
>     E: Unable to correct problems, you have held broken packages.
>
>     Are the packages provided by the philip5 ppa currently not be usable
>     with KDE 5.8.5?
>
>     Thanks for any help
>
>     Kai
>
>
>
>
>

--
----------------------------------------------------------------
  Kai Benndorf                        E-Mail: [hidden email]
  Zur Maibolte 44                     MOBILE: [phone]
  32657 Lemgo                         WORK:   05251 150623
  Germany                             PHONE:  [phone]
----------------------------------------------------------------

[Philip Johnsson]

I just uploaded digikam 5.4 packages built (building at the moment) for users of ubuntu 16.04 (or derivative distros) with updated version of KDE to KDE 5.8.x instead of the standard KDE 5.5.5 that ubuntu 16.04 comes with. IF you have installed and use the updated KDE 5.8.x on your system then add my "kubuntu-backports" PPA so you use BOTH my "extra" PPA AND my "kubuntu-backports" PPA. IF you use the standard KDE 5.5.x that ubuntu 16.04 comes with then ONLY use my "extra" PPA as before. This only apply to ubuntu 16.04 and not users of ubuntu 16.10 that keep on using ONLY my "extra" PPA. The "kubuntu-backports" PPA only contains rebuilds of packages in my "extra" PPA for other versions of KDE but "kubuntu-backports" PPA can NOT be used alone.

/Philip

On Mon, Jan 9, 2017 at 9:33 AM, Kai Benndorf <[hidden email]> wrote:

Thanks Philip,

I will try it when available.

Kai

Am 08.01.2017 um 23:35 schrieb Philip Johnsson:

This error is because of updated version of KDE have been released in
some sources from what standard official Ubuntu 16.04 comes with. So if
you use the updated version of KDE you need a rebuild version of Digikam
5.x for it (I think Linux Mint have the new KDE version backported).
This will be solved with my "kubuntu-backports" PPA for users that have
the updated version of KDE and the users that still use the standard
ubuntu 16.04 KDE use my "extra" PPA as before. Note that you always need
my "extra" PPA as it contains other dependent packages for digikam to
work. "kubuntu-backports" PPA will only have some packages rebuilt.

I'm just waiting for official digikam 5.4 tarball to be released to
upload the different builds of digikam 5.4 for the different versions of
KDE but right now you have to wait a bit for the fix.

/Philip


On Sun, Jan 8, 2017 at 12:48 PM, Kai Benndorf <[hidden email]
<mailto:[hidden email]>> wrote:

    Hi all,

    I just updated my Kubuntu 16.04 installation with KDE 5.8.5 from the
    backports ppa.

    Afterwards I wanted to update digikam as well and added the philip5 ppa.

    On trying to install digikam5 I get the following error message:

    apt-get install digikam5
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:

    The following packages have unmet dependencies:
         digikam5 : Depends: libmarblewidget-qt5-23 (>= 4:15.12.0) but
    it is not going to be installed
    E: Unable to correct problems, you have held broken packages.

    Are the packages provided by the philip5 ppa currently not be usable
    with KDE 5.8.5?

    Thanks for any help

    Kai

--
----------------------------------------------------------------
 Kai Benndorf                        E-Mail: [hidden email]
 Zur Maibolte 44                     MOBILE: [phone]
 32657 Lemgo                         WORK:   05251 150623
 Germany                             PHONE:  [phone]
----------------------------------------------------------------

[NeiNei]

Thanks a lot Philip for the extra service providing digikam 5.4 packages
for KDE 5.5.x and KDE 5.8.x distros :-)

On 11.01.2017 23:04, Philip Johnsson wrote:

> I just uploaded digikam 5.4 packages built (building at the moment) for
> users of ubuntu 16.04 (or derivative distros) with updated version of
> KDE to KDE 5.8.x instead of the standard KDE 5.5.5 that ubuntu 16.04
> comes with. IF you have installed and use the updated KDE 5.8.x on your
> system then add my "kubuntu-backports" PPA so you use BOTH my "extra"
> PPA AND my "kubuntu-backports" PPA. IF you use the standard KDE 5.5.x
> that ubuntu 16.04 comes with then ONLY use my "extra" PPA as before.
> This only apply to ubuntu 16.04 and not users of ubuntu 16.10 that keep
> on using ONLY my "extra" PPA. The "kubuntu-backports" PPA only contains
> rebuilds of packages in my "extra" PPA for other versions of KDE but
> "kubuntu-backports" PPA can NOT be used alone.
>
> /Philip
>
> On Mon, Jan 9, 2017 at 9:33 AM, Kai Benndorf <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Thanks Philip,
>
>     I will try it when available.
>
>     Kai
>
>     Am 08.01.2017 um 23:35 schrieb Philip Johnsson:
>
>         This error is because of updated version of KDE have been
>         released in
>         some sources from what standard official Ubuntu 16.04 comes
>         with. So if
>         you use the updated version of KDE you need a rebuild version of
>         Digikam
>         5.x for it (I think Linux Mint have the new KDE version backported).
>         This will be solved with my "kubuntu-backports" PPA for users
>         that have
>         the updated version of KDE and the users that still use the standard
>         ubuntu 16.04 KDE use my "extra" PPA as before. Note that you
>         always need
>         my "extra" PPA as it contains other dependent packages for
>         digikam to
>         work. "kubuntu-backports" PPA will only have some packages rebuilt.
>
>         I'm just waiting for official digikam 5.4 tarball to be released to
>         upload the different builds of digikam 5.4 for the different
>         versions of
>         KDE but right now you have to wait a bit for the fix.
>
>         /Philip
>
>
>         On Sun, Jan 8, 2017 at 12:48 PM, Kai Benndorf
>         <[hidden email] <mailto:[hidden email]>
>         <mailto:[hidden email] <mailto:[hidden email]>>> wrote:
>
>             Hi all,
>
>             I just updated my Kubuntu 16.04 installation with KDE 5.8.5
>         from the
>             backports ppa.
>
>             Afterwards I wanted to update digikam as well and added the
>         philip5 ppa.
>
>             On trying to install digikam5 I get the following error message:
>
>             apt-get install digikam5
>             Reading package lists... Done
>             Building dependency tree
>             Reading state information... Done
>             Some packages could not be installed. This may mean that you
>         have
>             requested an impossible situation or if you are using the
>         unstable
>             distribution that some required packages have not yet been
>         created
>             or been moved out of Incoming.
>             The following information may help to resolve the situation:
>
>             The following packages have unmet dependencies:
>                  digikam5 : Depends: libmarblewidget-qt5-23 (>=
>         4:15.12.0) but
>             it is not going to be installed
>             E: Unable to correct problems, you have held broken packages.
>
>             Are the packages provided by the philip5 ppa currently not
>         be usable
>             with KDE 5.8.5?
>
>             Thanks for any help
>
>             Kai
>
>
>
>
>
>
>     --
>     ----------------------------------------------------------------
>      Kai Benndorf                        E-Mail: [hidden email]
>     <mailto:[hidden email]>
>      Zur Maibolte 44                     MOBILE: [phone]
>      32657 Lemgo                         WORK:   05251 150623
>      Germany                             PHONE:  [phone]
>     ----------------------------------------------------------------
>
>

[Kai Benndorf]

Thanks Philip,

I just installed digikam 5.4 from your extra and kubuntu-backports ppa
without problems.

Best regards

Kai

Am 11.01.2017 um 23:04 schrieb Philip Johnsson:

> I just uploaded digikam 5.4 packages built (building at the moment) for
> users of ubuntu 16.04 (or derivative distros) with updated version of
> KDE to KDE 5.8.x instead of the standard KDE 5.5.5 that ubuntu 16.04
> comes with. IF you have installed and use the updated KDE 5.8.x on your
> system then add my "kubuntu-backports" PPA so you use BOTH my "extra"
> PPA AND my "kubuntu-backports" PPA. IF you use the standard KDE 5.5.x
> that ubuntu 16.04 comes with then ONLY use my "extra" PPA as before.
> This only apply to ubuntu 16.04 and not users of ubuntu 16.10 that keep
> on using ONLY my "extra" PPA. The "kubuntu-backports" PPA only contains
> rebuilds of packages in my "extra" PPA for other versions of KDE but
> "kubuntu-backports" PPA can NOT be used alone.
>
> /Philip
>
> On Mon, Jan 9, 2017 at 9:33 AM, Kai Benndorf <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Thanks Philip,
>
>     I will try it when available.
>
>     Kai
>
>     Am 08.01.2017 um 23:35 schrieb Philip Johnsson:
>
>         This error is because of updated version of KDE have been
>         released in
>         some sources from what standard official Ubuntu 16.04 comes
>         with. So if
>         you use the updated version of KDE you need a rebuild version of
>         Digikam
>         5.x for it (I think Linux Mint have the new KDE version backported).
>         This will be solved with my "kubuntu-backports" PPA for users
>         that have
>         the updated version of KDE and the users that still use the standard
>         ubuntu 16.04 KDE use my "extra" PPA as before. Note that you
>         always need
>         my "extra" PPA as it contains other dependent packages for
>         digikam to
>         work. "kubuntu-backports" PPA will only have some packages rebuilt.
>
>         I'm just waiting for official digikam 5.4 tarball to be released to
>         upload the different builds of digikam 5.4 for the different
>         versions of
>         KDE but right now you have to wait a bit for the fix.
>
>         /Philip
>
>
>         On Sun, Jan 8, 2017 at 12:48 PM, Kai Benndorf
>         <[hidden email] <mailto:[hidden email]>
>         <mailto:[hidden email] <mailto:[hidden email]>>> wrote:
>
>             Hi all,
>
>             I just updated my Kubuntu 16.04 installation with KDE 5.8.5
>         from the
>             backports ppa.
>
>             Afterwards I wanted to update digikam as well and added the
>         philip5 ppa.
>
>             On trying to install digikam5 I get the following error message:
>
>             apt-get install digikam5
>             Reading package lists... Done
>             Building dependency tree
>             Reading state information... Done
>             Some packages could not be installed. This may mean that you
>         have
>             requested an impossible situation or if you are using the
>         unstable
>             distribution that some required packages have not yet been
>         created
>             or been moved out of Incoming.
>             The following information may help to resolve the situation:
>
>             The following packages have unmet dependencies:
>                  digikam5 : Depends: libmarblewidget-qt5-23 (>=
>         4:15.12.0) but
>             it is not going to be installed
>             E: Unable to correct problems, you have held broken packages.
>
>             Are the packages provided by the philip5 ppa currently not
>         be usable
>             with KDE 5.8.5?
>
>             Thanks for any help
>
>             Kai
>
>
>
>
>
>
>     --
>     ----------------------------------------------------------------
>      Kai Benndorf                        E-Mail: [hidden email]
>     <mailto:[hidden email]>
>      Zur Maibolte 44                     MOBILE: [phone]
>      32657 Lemgo                         WORK:   05251 150623
>      Germany                             PHONE:  [phone]
>     ----------------------------------------------------------------
>
>

--
----------------------------------------------------------------
  Kai Benndorf                        E-Mail: [hidden email]
  Zur Maibolte 44                     MOBILE: [phone]
  32657 Lemgo                         WORK:   [phone]
  Germany                             PHONE:  [phone]
----------------------------------------------------------------

[Philip Johnsson]

Kai, good to know. Let me know if you get any problem, even though you shouldn't... :)

/Philip 

On Jan 14, 2017 13:28, "Kai Benndorf" <[hidden email]> wrote:

Thanks Philip,

I just installed digikam 5.4 from your extra and kubuntu-backports ppa without problems.

Best regards

Kai

Am 11.01.2017 um 23:04 schrieb Philip Johnsson:

I just uploaded digikam 5.4 packages built (building at the moment) for
users of ubuntu 16.04 (or derivative distros) with updated version of
KDE to KDE 5.8.x instead of the standard KDE 5.5.5 that ubuntu 16.04
comes with. IF you have installed and use the updated KDE 5.8.x on your
system then add my "kubuntu-backports" PPA so you use BOTH my "extra"
PPA AND my "kubuntu-backports" PPA. IF you use the standard KDE 5.5.x
that ubuntu 16.04 comes with then ONLY use my "extra" PPA as before.
This only apply to ubuntu 16.04 and not users of ubuntu 16.10 that keep
on using ONLY my "extra" PPA. The "kubuntu-backports" PPA only contains
rebuilds of packages in my "extra" PPA for other versions of KDE but
"kubuntu-backports" PPA can NOT be used alone.

/Philip

On Mon, Jan 9, 2017 at 9:33 AM, Kai Benndorf <[hidden email]
<mailto:[hidden email]>> wrote:

    Thanks Philip,

    I will try it when available.

    Kai

    Am 08.01.2017 um 23:35 schrieb Philip Johnsson:

        This error is because of updated version of KDE have been
        released in
        some sources from what standard official Ubuntu 16.04 comes
        with. So if
        you use the updated version of KDE you need a rebuild version of
        Digikam
        5.x for it (I think Linux Mint have the new KDE version backported).
        This will be solved with my "kubuntu-backports" PPA for users
        that have
        the updated version of KDE and the users that still use the standard
        ubuntu 16.04 KDE use my "extra" PPA as before. Note that you
        always need
        my "extra" PPA as it contains other dependent packages for
        digikam to
        work. "kubuntu-backports" PPA will only have some packages rebuilt.

        I'm just waiting for official digikam 5.4 tarball to be released to
        upload the different builds of digikam 5.4 for the different
        versions of
        KDE but right now you have to wait a bit for the fix.

        /Philip


        On Sun, Jan 8, 2017 at 12:48 PM, Kai Benndorf
        <[hidden email] <mailto:[hidden email]>
        <mailto:[hidden email] <mailto:[hidden email]>>> wrote:

            Hi all,

            I just updated my Kubuntu 16.04 installation with KDE 5.8.5
        from the
            backports ppa.

            Afterwards I wanted to update digikam as well and added the
        philip5 ppa.

            On trying to install digikam5 I get the following error message:

            apt-get install digikam5
            Reading package lists... Done
            Building dependency tree
            Reading state information... Done
            Some packages could not be installed. This may mean that you
        have
            requested an impossible situation or if you are using the
        unstable
            distribution that some required packages have not yet been
        created
            or been moved out of Incoming.
            The following information may help to resolve the situation:

            The following packages have unmet dependencies:
                 digikam5 : Depends: libmarblewidget-qt5-23 (>=
        4:15.12.0) but
            it is not going to be installed
            E: Unable to correct problems, you have held broken packages.

            Are the packages provided by the philip5 ppa currently not
        be usable
            with KDE 5.8.5?

            Thanks for any help

            Kai






    --
    ----------------------------------------------------------------
     Kai Benndorf                        E-Mail: [hidden email]
    <mailto:[hidden email]>
     Zur Maibolte 44                     MOBILE: [phone]
     32657 Lemgo                         WORK:   05251 150623
     Germany                             PHONE:  [phone]
    ----------------------------------------------------------------

--
----------------------------------------------------------------
 Kai Benndorf                        E-Mail: [hidden email]
 Zur Maibolte 44                     MOBILE: <a href="tel:%2B49%20151%20%2055627946" value="[phone]" target="_blank">[phone]
 32657 Lemgo                         WORK:   <a href="tel:%2B49%205251%20150623" value="[phone]" target="_blank">[phone]
 Germany                             PHONE:  <a href="tel:%2B49%205261%2014465" value="[phone]" target="_blank">[phone]
----------------------------------------------------------------