Help building on OS X

[Viktor Hedefalk]

Hi,

I'm trying to get started with digiKam on OS X. I think the
instructions are a bit outdated and I could really use some help.

I first tried the macports installation. Everything went smoothly but
trying to start

/Applications/MacPorts/KDE4/digikam.app

it just crashes before any GUI is shown. I'll attach the thread dump.

However, I then noticed that this was an outdated version (3.x) so I
didn't research this any further but tried to build from source
instead.

So i cloned:

git clone git://anongit.kde.org/digikam-software-compilation dk

installed deps:

> sudo port -v install qt4-mac +debug
> sudo port -v install qt4-mac-sqlite3-plugin +debug
> sudo port -v install kdelibs4 +debug
> sudo port -v install kde4-baseapps +debug
> sudo port -v install opencv +debug
> sudo port -v install marble +debug
> sudo port -v install oxygen-icons +debug
> sudo port -v install sane-backends +debug
> sudo port -v install libgpod +debug
> sudo port -v install libgphoto2 +debug
> sudo port -v install lensfun +debug
> sudo port -v install liblqr +debug

> ./download-repos
> ./bootstrap.macports

This seemed to go OK:

"--  digiKam can be compiled.................. YES"

Then
make install

which also succeeds and

sudo make install/fast

I then also ran:

> launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
> /opt/local/bin/kbuildsycoca4


Now it crashes with another failure. See attached log for 4.2.

I guess the most relevant part is the main thread:

Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib         0x00007fff8a29f0c2 close + 10
1   libkdeui.5.dylib               0x000000010fb2bec7
KCrash::defaultCrashHandler(int) + 247
2   libsystem_platform.dylib       0x00007fff92c6c5aa _sigtramp + 26
3   ???                           000000000000000000 0 + 0
4   libsystem_c.dylib             0x00007fff894c7b1a abort + 125
5   QtCore                         0x000000011111112b
qt_message_output(QtMsgType, char const*) + 203
6   QtCore                         0x00000001111113c9
qt_message(QtMsgType, char const*, __va_list_tag*) + 409
7   QtCore                         0x0000000111110caf qFatal(char
const*, ...) + 159
8   QtGui                         0x0000000110164786
QWidgetPrivate::QWidgetPrivate(int) + 774
9   QtGui                         0x00000001104ccf73
QFramePrivate::QFramePrivate() + 19
10  QtGui                         0x000000011054f8fe
QAbstractScrollAreaPrivate::QAbstractScrollAreaPrivate() + 14
11  QtGui                         0x0000000110554645
QScrollArea::QScrollArea(QWidget*) + 37
12  digikam                       0x000000010ba4e3be
Digikam::AssistantDlgPage::AssistantDlgPage(KAssistantDialog*, QString
const&) + 46 (assistantdlgpage.cpp:65)
13  digikam                       0x000000010ba4ef8a
Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 106
(welcomepage.cpp:44)
14  digikam                       0x000000010ba4ef0d
Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 29
(welcomepage.cpp:57)
15  digikam                       0x000000010ba4dcac
Digikam::AssistantDlg::AssistantDlg(QWidget*) + 300
(assistantdlg.cpp:75)
16  digikam                       0x000000010ba4db6d
Digikam::AssistantDlg::AssistantDlg(QWidget*) + 29
(assistantdlg.cpp:91)
17  digikam                       0x000000010baa9511 main + 5169 (main.cpp:148)
18  libdyld.dylib                 0x00007fff92d0f5fd start + 1



I probably don't correctly understand the instructions and miss some
dependency or something.

Any help is highly appreciated!

Thanks,
Viktor

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Gilles Caulier-4]

The trace look like a problem in KDELibs.

In this typical situation, i uninstall all macports, reinstall it, and
run my script to automatize installation of all components. digiKam
need to be compiled after that. You can use git/master as you said
previously. Here it work fine.

My scripts are here :

https://projects.kde.org/projects/extragear/graphics/digikam/digikam-software-compilation/repository/revisions/master/show/project/macosx

macports-uninstall.sh remove whole macport from your MAC, typically
installed in /opt. This remove macport binary too...

macports-install.sh re-install all, including macports binary, process
update, and install all components to compile digiKam from git/master
After that, just checkout git/master code, and configure and compile
as you do previously.

macports-update.sh update all components installed through macports on
your computer.

Mine is installed since february 2014 and i just updated all since.

Gilles Caulier

2014-08-02 23:27 GMT+02:00 Viktor Hedefalk <[hidden email]>:

> Hi,
>
> I'm trying to get started with digiKam on OS X. I think the
> instructions are a bit outdated and I could really use some help.
>
> I first tried the macports installation. Everything went smoothly but
> trying to start
>
> /Applications/MacPorts/KDE4/digikam.app
>
> it just crashes before any GUI is shown. I'll attach the thread dump.
>
> However, I then noticed that this was an outdated version (3.x) so I
> didn't research this any further but tried to build from source
> instead.
>
> So i cloned:
>
> git clone git://anongit.kde.org/digikam-software-compilation dk
>
> installed deps:
>
>> sudo port -v install qt4-mac +debug
>> sudo port -v install qt4-mac-sqlite3-plugin +debug
>> sudo port -v install kdelibs4 +debug
>> sudo port -v install kde4-baseapps +debug
>> sudo port -v install opencv +debug
>> sudo port -v install marble +debug
>> sudo port -v install oxygen-icons +debug
>> sudo port -v install sane-backends +debug
>> sudo port -v install libgpod +debug
>> sudo port -v install libgphoto2 +debug
>> sudo port -v install lensfun +debug
>> sudo port -v install liblqr +debug
>
>> ./download-repos
>> ./bootstrap.macports
>
> This seemed to go OK:
>
> "--  digiKam can be compiled.................. YES"
>
> Then
> make install
>
> which also succeeds and
>
> sudo make install/fast
>
> I then also ran:
>
>> launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
>> /opt/local/bin/kbuildsycoca4
>
>
> Now it crashes with another failure. See attached log for 4.2.
>
> I guess the most relevant part is the main thread:
>
> Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
> 0   libsystem_kernel.dylib         0x00007fff8a29f0c2 close + 10
> 1   libkdeui.5.dylib               0x000000010fb2bec7
> KCrash::defaultCrashHandler(int) + 247
> 2   libsystem_platform.dylib       0x00007fff92c6c5aa _sigtramp + 26
> 3   ???                           000000000000000000 0 + 0
> 4   libsystem_c.dylib             0x00007fff894c7b1a abort + 125
> 5   QtCore                         0x000000011111112b
> qt_message_output(QtMsgType, char const*) + 203
> 6   QtCore                         0x00000001111113c9
> qt_message(QtMsgType, char const*, __va_list_tag*) + 409
> 7   QtCore                         0x0000000111110caf qFatal(char
> const*, ...) + 159
> 8   QtGui                         0x0000000110164786
> QWidgetPrivate::QWidgetPrivate(int) + 774
> 9   QtGui                         0x00000001104ccf73
> QFramePrivate::QFramePrivate() + 19
> 10  QtGui                         0x000000011054f8fe
> QAbstractScrollAreaPrivate::QAbstractScrollAreaPrivate() + 14
> 11  QtGui                         0x0000000110554645
> QScrollArea::QScrollArea(QWidget*) + 37
> 12  digikam                       0x000000010ba4e3be
> Digikam::AssistantDlgPage::AssistantDlgPage(KAssistantDialog*, QString
> const&) + 46 (assistantdlgpage.cpp:65)
> 13  digikam                       0x000000010ba4ef8a
> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 106
> (welcomepage.cpp:44)
> 14  digikam                       0x000000010ba4ef0d
> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 29
> (welcomepage.cpp:57)
> 15  digikam                       0x000000010ba4dcac
> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 300
> (assistantdlg.cpp:75)
> 16  digikam                       0x000000010ba4db6d
> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 29
> (assistantdlg.cpp:91)
> 17  digikam                       0x000000010baa9511 main + 5169 (main.cpp:148)
> 18  libdyld.dylib                 0x00007fff92d0f5fd start + 1
>
>
>
> I probably don't correctly understand the instructions and miss some
> dependency or something.
>
> Any help is highly appreciated!
>
> Thanks,
> Viktor
>
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users
>

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Viktor Hedefalk]

Awesome, thanks! It worked.

Cheers,
Viktor

On Sun, Aug 3, 2014 at 11:32 AM, Gilles Caulier
<[hidden email]> wrote:

> The trace look like a problem in KDELibs.
>
> In this typical situation, i uninstall all macports, reinstall it, and
> run my script to automatize installation of all components. digiKam
> need to be compiled after that. You can use git/master as you said
> previously. Here it work fine.
>
> My scripts are here :
>
> https://projects.kde.org/projects/extragear/graphics/digikam/digikam-software-compilation/repository/revisions/master/show/project/macosx
>
> macports-uninstall.sh remove whole macport from your MAC, typically
> installed in /opt. This remove macport binary too...
>
> macports-install.sh re-install all, including macports binary, process
> update, and install all components to compile digiKam from git/master
> After that, just checkout git/master code, and configure and compile
> as you do previously.
>
> macports-update.sh update all components installed through macports on
> your computer.
>
> Mine is installed since february 2014 and i just updated all since.
>
> Gilles Caulier
>
> 2014-08-02 23:27 GMT+02:00 Viktor Hedefalk <[hidden email]>:
>> Hi,
>>
>> I'm trying to get started with digiKam on OS X. I think the
>> instructions are a bit outdated and I could really use some help.
>>
>> I first tried the macports installation. Everything went smoothly but
>> trying to start
>>
>> /Applications/MacPorts/KDE4/digikam.app
>>
>> it just crashes before any GUI is shown. I'll attach the thread dump.
>>
>> However, I then noticed that this was an outdated version (3.x) so I
>> didn't research this any further but tried to build from source
>> instead.
>>
>> So i cloned:
>>
>> git clone git://anongit.kde.org/digikam-software-compilation dk
>>
>> installed deps:
>>
>>> sudo port -v install qt4-mac +debug
>>> sudo port -v install qt4-mac-sqlite3-plugin +debug
>>> sudo port -v install kdelibs4 +debug
>>> sudo port -v install kde4-baseapps +debug
>>> sudo port -v install opencv +debug
>>> sudo port -v install marble +debug
>>> sudo port -v install oxygen-icons +debug
>>> sudo port -v install sane-backends +debug
>>> sudo port -v install libgpod +debug
>>> sudo port -v install libgphoto2 +debug
>>> sudo port -v install lensfun +debug
>>> sudo port -v install liblqr +debug
>>
>>> ./download-repos
>>> ./bootstrap.macports
>>
>> This seemed to go OK:
>>
>> "--  digiKam can be compiled.................. YES"
>>
>> Then
>> make install
>>
>> which also succeeds and
>>
>> sudo make install/fast
>>
>> I then also ran:
>>
>>> launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
>>> /opt/local/bin/kbuildsycoca4
>>
>>
>> Now it crashes with another failure. See attached log for 4.2.
>>
>> I guess the most relevant part is the main thread:
>>
>> Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
>> 0   libsystem_kernel.dylib         0x00007fff8a29f0c2 close + 10
>> 1   libkdeui.5.dylib               0x000000010fb2bec7
>> KCrash::defaultCrashHandler(int) + 247
>> 2   libsystem_platform.dylib       0x00007fff92c6c5aa _sigtramp + 26
>> 3   ???                           000000000000000000 0 + 0
>> 4   libsystem_c.dylib             0x00007fff894c7b1a abort + 125
>> 5   QtCore                         0x000000011111112b
>> qt_message_output(QtMsgType, char const*) + 203
>> 6   QtCore                         0x00000001111113c9
>> qt_message(QtMsgType, char const*, __va_list_tag*) + 409
>> 7   QtCore                         0x0000000111110caf qFatal(char
>> const*, ...) + 159
>> 8   QtGui                         0x0000000110164786
>> QWidgetPrivate::QWidgetPrivate(int) + 774
>> 9   QtGui                         0x00000001104ccf73
>> QFramePrivate::QFramePrivate() + 19
>> 10  QtGui                         0x000000011054f8fe
>> QAbstractScrollAreaPrivate::QAbstractScrollAreaPrivate() + 14
>> 11  QtGui                         0x0000000110554645
>> QScrollArea::QScrollArea(QWidget*) + 37
>> 12  digikam                       0x000000010ba4e3be
>> Digikam::AssistantDlgPage::AssistantDlgPage(KAssistantDialog*, QString
>> const&) + 46 (assistantdlgpage.cpp:65)
>> 13  digikam                       0x000000010ba4ef8a
>> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 106
>> (welcomepage.cpp:44)
>> 14  digikam                       0x000000010ba4ef0d
>> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 29
>> (welcomepage.cpp:57)
>> 15  digikam                       0x000000010ba4dcac
>> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 300
>> (assistantdlg.cpp:75)
>> 16  digikam                       0x000000010ba4db6d
>> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 29
>> (assistantdlg.cpp:91)
>> 17  digikam                       0x000000010baa9511 main + 5169 (main.cpp:148)
>> 18  libdyld.dylib                 0x00007fff92d0f5fd start + 1
>>
>>
>>
>> I probably don't correctly understand the instructions and miss some
>> dependency or something.
>>
>> Any help is highly appreciated!
>>
>> Thanks,
>> Viktor
>>
>> _______________________________________________
>> Digikam-users mailing list
>> [hidden email]
>> https://mail.kde.org/mailman/listinfo/digikam-users
>>
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Agustin Lobo]

Why not having a dmg? Installing Digikam on Mac OSX is just a nightmare.
Such an excellent software (the best photo cataloging system) is
unavailable in practice for most Mac OSX users.
I'm finally using lightroom (which is definetly not as good!) just
because cannot afford investing so much time on installing every new
version of digikam. What an absurd situation.
Agus



On Mon, Aug 4, 2014 at 8:32 AM, Viktor Hedefalk <[hidden email]> wrote:

> Awesome, thanks! It worked.
>
> Cheers,
> Viktor
>
> On Sun, Aug 3, 2014 at 11:32 AM, Gilles Caulier
> <[hidden email]> wrote:
>> The trace look like a problem in KDELibs.
>>
>> In this typical situation, i uninstall all macports, reinstall it, and
>> run my script to automatize installation of all components. digiKam
>> need to be compiled after that. You can use git/master as you said
>> previously. Here it work fine.
>>
>> My scripts are here :
>>
>> https://projects.kde.org/projects/extragear/graphics/digikam/digikam-software-compilation/repository/revisions/master/show/project/macosx
>>
>> macports-uninstall.sh remove whole macport from your MAC, typically
>> installed in /opt. This remove macport binary too...
>>
>> macports-install.sh re-install all, including macports binary, process
>> update, and install all components to compile digiKam from git/master
>> After that, just checkout git/master code, and configure and compile
>> as you do previously.
>>
>> macports-update.sh update all components installed through macports on
>> your computer.
>>
>> Mine is installed since february 2014 and i just updated all since.
>>
>> Gilles Caulier
>>
>> 2014-08-02 23:27 GMT+02:00 Viktor Hedefalk <[hidden email]>:
>>> Hi,
>>>
>>> I'm trying to get started with digiKam on OS X. I think the
>>> instructions are a bit outdated and I could really use some help.
>>>
>>> I first tried the macports installation. Everything went smoothly but
>>> trying to start
>>>
>>> /Applications/MacPorts/KDE4/digikam.app
>>>
>>> it just crashes before any GUI is shown. I'll attach the thread dump.
>>>
>>> However, I then noticed that this was an outdated version (3.x) so I
>>> didn't research this any further but tried to build from source
>>> instead.
>>>
>>> So i cloned:
>>>
>>> git clone git://anongit.kde.org/digikam-software-compilation dk
>>>
>>> installed deps:
>>>
>>>> sudo port -v install qt4-mac +debug
>>>> sudo port -v install qt4-mac-sqlite3-plugin +debug
>>>> sudo port -v install kdelibs4 +debug
>>>> sudo port -v install kde4-baseapps +debug
>>>> sudo port -v install opencv +debug
>>>> sudo port -v install marble +debug
>>>> sudo port -v install oxygen-icons +debug
>>>> sudo port -v install sane-backends +debug
>>>> sudo port -v install libgpod +debug
>>>> sudo port -v install libgphoto2 +debug
>>>> sudo port -v install lensfun +debug
>>>> sudo port -v install liblqr +debug
>>>
>>>> ./download-repos
>>>> ./bootstrap.macports
>>>
>>> This seemed to go OK:
>>>
>>> "--  digiKam can be compiled.................. YES"
>>>
>>> Then
>>> make install
>>>
>>> which also succeeds and
>>>
>>> sudo make install/fast
>>>
>>> I then also ran:
>>>
>>>> launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
>>>> /opt/local/bin/kbuildsycoca4
>>>
>>>
>>> Now it crashes with another failure. See attached log for 4.2.
>>>
>>> I guess the most relevant part is the main thread:
>>>
>>> Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
>>> 0   libsystem_kernel.dylib         0x00007fff8a29f0c2 close + 10
>>> 1   libkdeui.5.dylib               0x000000010fb2bec7
>>> KCrash::defaultCrashHandler(int) + 247
>>> 2   libsystem_platform.dylib       0x00007fff92c6c5aa _sigtramp + 26
>>> 3   ???                           000000000000000000 0 + 0
>>> 4   libsystem_c.dylib             0x00007fff894c7b1a abort + 125
>>> 5   QtCore                         0x000000011111112b
>>> qt_message_output(QtMsgType, char const*) + 203
>>> 6   QtCore                         0x00000001111113c9
>>> qt_message(QtMsgType, char const*, __va_list_tag*) + 409
>>> 7   QtCore                         0x0000000111110caf qFatal(char
>>> const*, ...) + 159
>>> 8   QtGui                         0x0000000110164786
>>> QWidgetPrivate::QWidgetPrivate(int) + 774
>>> 9   QtGui                         0x00000001104ccf73
>>> QFramePrivate::QFramePrivate() + 19
>>> 10  QtGui                         0x000000011054f8fe
>>> QAbstractScrollAreaPrivate::QAbstractScrollAreaPrivate() + 14
>>> 11  QtGui                         0x0000000110554645
>>> QScrollArea::QScrollArea(QWidget*) + 37
>>> 12  digikam                       0x000000010ba4e3be
>>> Digikam::AssistantDlgPage::AssistantDlgPage(KAssistantDialog*, QString
>>> const&) + 46 (assistantdlgpage.cpp:65)
>>> 13  digikam                       0x000000010ba4ef8a
>>> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 106
>>> (welcomepage.cpp:44)
>>> 14  digikam                       0x000000010ba4ef0d
>>> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 29
>>> (welcomepage.cpp:57)
>>> 15  digikam                       0x000000010ba4dcac
>>> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 300
>>> (assistantdlg.cpp:75)
>>> 16  digikam                       0x000000010ba4db6d
>>> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 29
>>> (assistantdlg.cpp:91)
>>> 17  digikam                       0x000000010baa9511 main + 5169 (main.cpp:148)
>>> 18  libdyld.dylib                 0x00007fff92d0f5fd start + 1
>>>
>>>
>>>
>>> I probably don't correctly understand the instructions and miss some
>>> dependency or something.
>>>
>>> Any help is highly appreciated!
>>>
>>> Thanks,
>>> Viktor
>>>
>>> _______________________________________________
>>> Digikam-users mailing list
>>> [hidden email]
>>> https://mail.kde.org/mailman/listinfo/digikam-users
>>>
>> _______________________________________________
>> Digikam-users mailing list
>> [hidden email]
>> https://mail.kde.org/mailman/listinfo/digikam-users
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Gilles Caulier-4]

As MACBook Pro user, i tried to package offcial digiKam 4.0.0 release
through macports, which compile and install fine.

I tried to run "port mdmg digikam" as explained here :

https://guide.macports.org/chunked/using.binaries.html

... but compilation fail somewhere with dependencies. I think
something is wrong with macports rules somewhere and must be reported
to macports bugzilla.

Gilles Caulier

2014-08-17 11:04 GMT+02:00 Agustin Lobo <[hidden email]>:

> Why not having a dmg? Installing Digikam on Mac OSX is just a nightmare.
> Such an excellent software (the best photo cataloging system) is
> unavailable in practice for most Mac OSX users.
> I'm finally using lightroom (which is definetly not as good!) just
> because cannot afford investing so much time on installing every new
> version of digikam. What an absurd situation.
> Agus
>
>
>
> On Mon, Aug 4, 2014 at 8:32 AM, Viktor Hedefalk <[hidden email]> wrote:
>> Awesome, thanks! It worked.
>>
>> Cheers,
>> Viktor
>>
>> On Sun, Aug 3, 2014 at 11:32 AM, Gilles Caulier
>> <[hidden email]> wrote:
>>> The trace look like a problem in KDELibs.
>>>
>>> In this typical situation, i uninstall all macports, reinstall it, and
>>> run my script to automatize installation of all components. digiKam
>>> need to be compiled after that. You can use git/master as you said
>>> previously. Here it work fine.
>>>
>>> My scripts are here :
>>>
>>> https://projects.kde.org/projects/extragear/graphics/digikam/digikam-software-compilation/repository/revisions/master/show/project/macosx
>>>
>>> macports-uninstall.sh remove whole macport from your MAC, typically
>>> installed in /opt. This remove macport binary too...
>>>
>>> macports-install.sh re-install all, including macports binary, process
>>> update, and install all components to compile digiKam from git/master
>>> After that, just checkout git/master code, and configure and compile
>>> as you do previously.
>>>
>>> macports-update.sh update all components installed through macports on
>>> your computer.
>>>
>>> Mine is installed since february 2014 and i just updated all since.
>>>
>>> Gilles Caulier
>>>
>>> 2014-08-02 23:27 GMT+02:00 Viktor Hedefalk <[hidden email]>:
>>>> Hi,
>>>>
>>>> I'm trying to get started with digiKam on OS X. I think the
>>>> instructions are a bit outdated and I could really use some help.
>>>>
>>>> I first tried the macports installation. Everything went smoothly but
>>>> trying to start
>>>>
>>>> /Applications/MacPorts/KDE4/digikam.app
>>>>
>>>> it just crashes before any GUI is shown. I'll attach the thread dump.
>>>>
>>>> However, I then noticed that this was an outdated version (3.x) so I
>>>> didn't research this any further but tried to build from source
>>>> instead.
>>>>
>>>> So i cloned:
>>>>
>>>> git clone git://anongit.kde.org/digikam-software-compilation dk
>>>>
>>>> installed deps:
>>>>
>>>>> sudo port -v install qt4-mac +debug
>>>>> sudo port -v install qt4-mac-sqlite3-plugin +debug
>>>>> sudo port -v install kdelibs4 +debug
>>>>> sudo port -v install kde4-baseapps +debug
>>>>> sudo port -v install opencv +debug
>>>>> sudo port -v install marble +debug
>>>>> sudo port -v install oxygen-icons +debug
>>>>> sudo port -v install sane-backends +debug
>>>>> sudo port -v install libgpod +debug
>>>>> sudo port -v install libgphoto2 +debug
>>>>> sudo port -v install lensfun +debug
>>>>> sudo port -v install liblqr +debug
>>>>
>>>>> ./download-repos
>>>>> ./bootstrap.macports
>>>>
>>>> This seemed to go OK:
>>>>
>>>> "--  digiKam can be compiled.................. YES"
>>>>
>>>> Then
>>>> make install
>>>>
>>>> which also succeeds and
>>>>
>>>> sudo make install/fast
>>>>
>>>> I then also ran:
>>>>
>>>>> launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
>>>>> /opt/local/bin/kbuildsycoca4
>>>>
>>>>
>>>> Now it crashes with another failure. See attached log for 4.2.
>>>>
>>>> I guess the most relevant part is the main thread:
>>>>
>>>> Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
>>>> 0   libsystem_kernel.dylib         0x00007fff8a29f0c2 close + 10
>>>> 1   libkdeui.5.dylib               0x000000010fb2bec7
>>>> KCrash::defaultCrashHandler(int) + 247
>>>> 2   libsystem_platform.dylib       0x00007fff92c6c5aa _sigtramp + 26
>>>> 3   ???                           000000000000000000 0 + 0
>>>> 4   libsystem_c.dylib             0x00007fff894c7b1a abort + 125
>>>> 5   QtCore                         0x000000011111112b
>>>> qt_message_output(QtMsgType, char const*) + 203
>>>> 6   QtCore                         0x00000001111113c9
>>>> qt_message(QtMsgType, char const*, __va_list_tag*) + 409
>>>> 7   QtCore                         0x0000000111110caf qFatal(char
>>>> const*, ...) + 159
>>>> 8   QtGui                         0x0000000110164786
>>>> QWidgetPrivate::QWidgetPrivate(int) + 774
>>>> 9   QtGui                         0x00000001104ccf73
>>>> QFramePrivate::QFramePrivate() + 19
>>>> 10  QtGui                         0x000000011054f8fe
>>>> QAbstractScrollAreaPrivate::QAbstractScrollAreaPrivate() + 14
>>>> 11  QtGui                         0x0000000110554645
>>>> QScrollArea::QScrollArea(QWidget*) + 37
>>>> 12  digikam                       0x000000010ba4e3be
>>>> Digikam::AssistantDlgPage::AssistantDlgPage(KAssistantDialog*, QString
>>>> const&) + 46 (assistantdlgpage.cpp:65)
>>>> 13  digikam                       0x000000010ba4ef8a
>>>> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 106
>>>> (welcomepage.cpp:44)
>>>> 14  digikam                       0x000000010ba4ef0d
>>>> Digikam::WelcomePage::WelcomePage(KAssistantDialog*) + 29
>>>> (welcomepage.cpp:57)
>>>> 15  digikam                       0x000000010ba4dcac
>>>> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 300
>>>> (assistantdlg.cpp:75)
>>>> 16  digikam                       0x000000010ba4db6d
>>>> Digikam::AssistantDlg::AssistantDlg(QWidget*) + 29
>>>> (assistantdlg.cpp:91)
>>>> 17  digikam                       0x000000010baa9511 main + 5169 (main.cpp:148)
>>>> 18  libdyld.dylib                 0x00007fff92d0f5fd start + 1
>>>>
>>>>
>>>>
>>>> I probably don't correctly understand the instructions and miss some
>>>> dependency or something.
>>>>
>>>> Any help is highly appreciated!
>>>>
>>>> Thanks,
>>>> Viktor
>>>>
>>>> _______________________________________________
>>>> Digikam-users mailing list
>>>> [hidden email]
>>>> https://mail.kde.org/mailman/listinfo/digikam-users
>>>>
>>> _______________________________________________
>>> Digikam-users mailing list
>>> [hidden email]
>>> https://mail.kde.org/mailman/listinfo/digikam-users
>> _______________________________________________
>> Digikam-users mailing list
>> [hidden email]
>> https://mail.kde.org/mailman/listinfo/digikam-users
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Gilles Caulier-4]

> 2014-08-17 11:04 GMT+02:00 Agustin Lobo <[hidden email]>:
>> Why not having a dmg? Installing Digikam on Mac OSX is just a nightmare.
>> Such an excellent software (the best photo cataloging system) is
>> unavailable in practice for most Mac OSX users.
>> I'm finally using lightroom (which is definetly not as good!) just
>> because cannot afford investing so much time on installing every new
>> version of digikam. What an absurd situation.
>> Agus
>>

Else digiKam compile fine under Macports. 4.2.0 run with enough
quality to be suitable. It do not run like under Linux. For ex, OSX
trash is not managed (as under Windows), it's a KDElibs bug. Camera
Import cannot be started automatically yet. I also see dysfunction in
BQM. It will become better in the future.

https://www.flickr.com/photos/digikam/14581614670/

To compile current code from git/Master (next 4.3.0), this can be
automated following instructions here :

https://projects.kde.org/projects/extragear/graphics/digikam/digikam-software-compilation/repository/revisions/master/entry/README.MACOSX

I also write 3 scripts here :

https://projects.kde.org/projects/extragear/graphics/digikam/digikam-software-compilation/repository/revisions/master/show/project/macosx

macports-install.sh : install macports and all digiKam dependencies.
After that, you can checkout digiKam code and compile/install it as
well
macports-uninstall.sh : remove all macports installation.
macports-update.sh : update macports packages installed.

Gilles Caulier
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users