[Bug 199497] New: Open camera rejected with: "Fehler beim Auflisten der Dateien in /store_00010001/DCIM/100CANON."

https://bugs.kde.org/show_bug.cgi?id=199497

           Summary: Open camera rejected with:  "Fehler beim Auflisten der
                    Dateien in /store_00010001/DCIM/100CANON."
           Product: digikam
           Version: 0.9.3
          Platform: unspecified
        OS/Version: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: NOR
         Component: general
        AssignedTo: [hidden email]
        ReportedBy: [hidden email]


Version:           0.9.3 (using 3.5.9 "release 49.1" , openSUSE 11.0)
Compiler:          Target: i586-suse-linux
OS:                Linux (i686) release 2.6.25.20-0.4-pae

Camera "Canon Digital IXUS 85 IS"  dont open.
Camera was identified as "USB PTB class camera"

I downloaded (camera to Computer) more then 1000 pics. same computer, same
system + software. It works well.

Now when i (try to) open the camera, i get the Message-Window:
"Fehler beim Auflisten der Dateien in /store_00010001/DCIM/100CANON." after
about 20 seconds time.

Why? I dont know what to do?

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

https://bugs.kde.org/show_bug.cgi?id=199497


Gilles Caulier <[hidden email]> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
          Component|general                     |Camera GUI




--- Comment #1 from Gilles Caulier <caulier gilles gmail com>  2009-07-09 06:19:09 ---
digiKam 0.9.3 is too old. Please update to :

0.9.6 for KDE3.
0.10.0 for KDE4.

Note : Canon camera driver come from libgphoto2.

Gilles Caulier

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

https://bugs.kde.org/show_bug.cgi?id=199497





--- Comment #2 from Andi Clemens <andi clemens gmx net>  2009-07-09 10:20:03 ---
Nur mal so am Rande: Deutsche Fehlermeldungen sind nicht sehr vorteilhaft in
einem internationalen Bugreport ;-)

---

Somehow I don't quite understand where the problem is right now?

Did you successfully download the images, but you are not able to access the
camera from within digiKam (how did you download them in that case)?

Or were you able to download them in the past, but now it is not working
anymore?

In the first case, you should be able to access the camera also via the
cardreader menu entries in digiKam. I never was able to access my Nikon D50
with digiKam, but via the cardreader entry that also shows up, it always works.

Like Gilles said, libgphoto2 handles camera access, so if you can access the
images via the cardreader slot but not the camera slot, it is defintely a
gphoto2 problem.

Can you try the cardreader menu entry?

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

https://bugs.kde.org/show_bug.cgi?id=199497





--- Comment #3 from Lutz <LpMat web de>  2009-07-09 10:46:40 ---
Thanx.

Workaround:  Delete some old Pics+Vids (which have been downloaded
earlier) on camera directly by button to increase the amount of Data on
the SD-card. Than it works without Error-window.  Greetz LpMat

Gilles Caulier schrieb:

> https://bugs.kde.org/show_bug.cgi?id=199497
>
>
> Gilles Caulier <[hidden email]> changed:
>
>            What    |Removed                     |Added
> ----------------------------------------------------------------------------
>           Component|general                     |Camera GUI
>
>
>
>
> --- Comment #1 from Gilles Caulier <caulier gilles gmail com>  2009-07-09 06:19:09 ---
> digiKam 0.9.3 is too old. Please update to :
>
> 0.9.6 for KDE3.
> 0.10.0 for KDE4.
>
> Note : Canon camera driver come from libgphoto2.
>
> Gilles Caulier
>

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

https://bugs.kde.org/show_bug.cgi?id=199497


Lutz <[hidden email]> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|UNCONFIRMED                 |RESOLVED
         Resolution|                            |WORKSFORME




--- Comment #4 from Lutz <LpMat web de>  2009-07-09 12:49:32 ---
(In reply to comment #2)
> Nur mal so am Rande: Deutsche Fehlermeldungen ...(...)

Sry. Next time i switch in EN before writing. ;-)

>
> ---
>
> Somehow I don't quite understand where the problem is right now?
>
> Did you successfully download the images, but you are not able to access the
> camera from within digiKam (how did you download them in that case)?
>
> Or were you able to download them in the past, but now it is not working
> anymore?

yes. In the past it works. Yesterday i got the Error-Window.

>
> In the first case, you should be able to access the camera also via the
> cardreader menu entries in digiKam. I never was able to access my Nikon D50
> with digiKam, but via the cardreader entry that also shows up, it always works.
>
> Like Gilles said, libgphoto2 handles camera access, so if you can access the
> images via the cardreader slot but not the camera slot, it is defintely a
> gphoto2 problem.
>
> Can you try the cardreader menu entry?

Dont know the difference between "via cardreader" and "somewhat..". I've no
cardreader. Plugin my cam direct to usb. Access them via digicam ==> menu
"camera" ==> "USB-PTP-Class-Cam" ==> opens a window which shows me the content
of cam with buttons to download, delete and so on.
The Menu "Camera" ==> "Browse media" dont displays a way to it.

But see  WORKAROND above.  

Try to change the state to "Resolved"  
Thx.  Greetz Lutz

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel

[Gilles Caulier-4]

https://bugs.kde.org/show_bug.cgi?id=199497


Gilles Caulier <[hidden email]> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
          Component|Camera GUI                  |Import




--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Digikam-devel mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-devel