8.2 aspect ratio crop problem

[Francesco Scaglioni-2]

Hi,

All of a sudden if I attempt to use the aspect ratio crop
tool then my machine almost freezes (only solution is to log
to text console - very slow to happen - then kill the
digikam process.  All other functions appear to work
normally.  Any suggestions most welcome.

TIA

F

---------------------------------------------------------------------
-
-
-
-
-
-
The information in this e-mail and any attachments is confidential
and
is
intended for the attention and use of the named addressee(s).  It
must
not
be disclosed to any other person  without our authority.  If you are
not
the intended recipient, or a person responsible for delivering it to
the
intended recipient or are aware that this e-mail has been sent to
you
in
error, you are not authorised to and must not disclose, copy,
distribute,
or retain this message or any part of it.

We sweep all outgoing messages for the presence of computer viruses.
However, we cannot accept any responsibility for any loss or damage
to
your systems due to viruses or malicious code not detected.

The statements and opinions expressed in this message are those of
the
author and do not necessarily reflect those of the organisations
within
the Cornwall & Isles of Scilly Health Community.

This email may be disclosed under the Freedom of Information  Act
2000
or
the Environmental Information Regulations 2004.
---------------------------------------------------------------------
-
-
-
-
-
-
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Arnd Baecker]

Hi Francesco,

On Tue, 9 Oct 2007, Francesco Scaglioni wrote:

> Hi,
>
> All of a sudden if I attempt to use the aspect ratio crop
> tool then my machine almost freezes (only solution is to log
> to text console - very slow to happen - then kill the
> digikam process.  All other functions appear to work
> normally.  Any suggestions most welcome.


Hmm, just guessing:
could you be running out of disk space (in particular /tmp/ ?)

Do you have any more information on the image (raw, tiff, jpeg, size,
...), or is it completely independent of the image?

Arnd
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[James Strickland]

Greetings all...

Here's what I'm trying to do.  I used to use digikam to rename and
resize entire directories of photos (via the batch menu).  Now, since I
have upgraded and now it doesn't work.  The menu is empty. I have
re-emerged digikam, plugins, etc... I can't get it to work at all.  Now.
I did get 0.9.2 installed, the plugins were blocking them, so I had to
un-emerge the plugins.  After 0.9.2 emerged, when I emerged the plugins,
it downgraded digikam back to 0.9.1?  Even before the downgrade, the
batch menu was empty.  So, now I'm at 0.9.1 with no batch menu.

Any help would be great please.  

screenshots:  http://strickstuff.com/digikam.html

I'm running Sabayon Linux 3.4e x64 (Linux 2.6.22), 1 gig ram.  

thanks,

--
James Strickland
www.StrickStuff.com

  -----BEGIN GEEK CODE BLOCK-----
  Version: 3.1
  GO d- s+:+ a C++ UL P+ L+++ E- W++ N+ K- O- M- PS-- PGP+
  t tv+ b- G e h---- y+++
  ------END GEEK CODE BLOCK------

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Francesco Scaglioni-2]

Hi,

> > All of a sudden if I attempt to use the aspect ratio crop
> > tool then my machine almost freezes (only solution is to log
> > to text console - very slow to happen - then kill the
> > digikam process.  All other functions appear to work
> > normally.  Any suggestions most welcome.
>
>
> Hmm, just guessing:
> could you be running out of disk space (in particular /tmp/ ?)
>
> Do you have any more information on the image (raw, tiff, jpeg, size,
> ...), or is it completely independent of the image?
>
> Arnd

1.5 G free space.  Seems to happen irrespective of the file
size, just tried it on an elderly 1600x1200 jpg instead of
the usual 3264x2448.

F

---------------------------------------------------------------------
-
-
-
-
-
-
The information in this e-mail and any attachments is confidential
and
is
intended for the attention and use of the named addressee(s).  It
must
not
be disclosed to any other person  without our authority.  If you are
not
the intended recipient, or a person responsible for delivering it to
the
intended recipient or are aware that this e-mail has been sent to
you
in
error, you are not authorised to and must not disclose, copy,
distribute,
or retain this message or any part of it.

We sweep all outgoing messages for the presence of computer viruses.
However, we cannot accept any responsibility for any loss or damage
to
your systems due to viruses or malicious code not detected.

The statements and opinions expressed in this message are those of
the
author and do not necessarily reflect those of the organisations
within
the Cornwall & Isles of Scilly Health Community.

This email may be disclosed under the Freedom of Information  Act
2000
or
the Environmental Information Regulations 2004.
---------------------------------------------------------------------
-
-
-
-
-
-
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Gilles Caulier-4]

James,

Are you installed "kipi-plugins" package with digiKam 0.9.2 ? (not digikamimageplugins witch have been merged to digiKam core with this release)

Gilles Caulier

2007/10/9, James Strickland <[hidden email]>:

Greetings all...

Here's what I'm trying to do.  I used to use digikam to rename and
resize entire directories of photos (via the batch menu).  Now, since I
have upgraded and now it doesn't work.  The menu is empty. I have
re-emerged digikam, plugins, etc... I can't get it to work at all.  Now.
I did get 0.9.2 installed, the plugins were blocking them, so I had to
un-emerge the plugins.  After 0.9.2 emerged, when I emerged the plugins,
it downgraded digikam back to 0.9.1?  Even before the downgrade, the
batch menu was empty.  So, now I'm at 0.9.1 with no batch menu.

Any help would be great please.

screenshots:   http://strickstuff.com/digikam.html

I'm running Sabayon Linux 3.4e x64 (Linux 2.6.22), 1 gig ram.

thanks,

--
James Strickland
www.StrickStuff.com

  -----BEGIN GEEK CODE BLOCK-----
  Version: 3.1
  GO d- s+:+ a C++ UL P+ L+++ E- W++ N+ K- O- M- PS-- PGP+
  t tv+ b- G e h---- y+++
  ------END GEEK CODE BLOCK------

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Gerhard Kulzer]

Am Tuesday 09 October 2007 schrieb James Strickland:

> Greetings all...
>
> Here's what I'm trying to do.  I used to use digikam to rename and
> resize entire directories of photos (via the batch menu).  Now, since I
> have upgraded and now it doesn't work.  The menu is empty. I have
> re-emerged digikam, plugins, etc... I can't get it to work at all.  Now.
> I did get 0.9.2 installed, the plugins were blocking them, so I had to
> un-emerge the plugins.  After 0.9.2 emerged, when I emerged the plugins,
> it downgraded digikam back to 0.9.1?  Even before the downgrade, the
> batch menu was empty.  So, now I'm at 0.9.1 with no batch menu.
>
> Any help would be great please.
>
> screenshots:  http://strickstuff.com/digikam.html
>
> I'm running Sabayon Linux 3.4e x64 (Linux 2.6.22), 1 gig ram.
>
> thanks,

Stick with 0.9.2 and get rid of the digikamimageplugins before. They are now
integrated into digikam, so digiKam 0.9.2 and Kipi-plugins is all you need.

When you loose the menu, try Ctrl+M or cycle 1 time through FullScreenMode
Ctrl+Shift+F

Gerhard
--
Hakuna matata
http://www.gerhard.fr

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[Gerhard Kulzer]

Am Tuesday 09 October 2007 schrieb James Strickland:

> Thanks, I'll give it a shot... as soon as this current compile finishes,
> I'll emerge 0.9.2.
>
> -James
>
> On Tue, 2007-10-09 at 12:35 +0200, Gerhard Kulzer wrote:
> > Am Tuesday 09 October 2007 schrieb James Strickland:
> > > Greetings all...
> > >
> > > Here's what I'm trying to do.  I used to use digikam to rename and
> > > resize entire directories of photos (via the batch menu).  Now, since I
> > > have upgraded and now it doesn't work.  The menu is empty. I have
> > > re-emerged digikam, plugins, etc... I can't get it to work at all.
> > > Now. I did get 0.9.2 installed, the plugins were blocking them, so I
> > > had to un-emerge the plugins.  After 0.9.2 emerged, when I emerged the
> > > plugins, it downgraded digikam back to 0.9.1?  Even before the
> > > downgrade, the batch menu was empty.  So, now I'm at 0.9.1 with no
> > > batch menu.
> > >
> > > Any help would be great please.
> > >
> > > screenshots:  http://strickstuff.com/digikam.html
> > >
> > > I'm running Sabayon Linux 3.4e x64 (Linux 2.6.22), 1 gig ram.
> > >
> > > thanks,
> >
> > Stick with 0.9.2 and get rid of the digikamimageplugins before. They are
> > now integrated into digikam, so digiKam 0.9.2 and Kipi-plugins is all you
> > need.
> >
> > When you loose the menu, try Ctrl+M or cycle 1 time through
> > FullScreenMode Ctrl+Shift+F
> >
> > Gerhard
> > _______________________________________________
> > Digikam-users mailing list
> > [hidden email]
> > https://mail.kde.org/mailman/listinfo/digikam-users

If you compile digiKam, then take the brandnew 0.9.3-beta1 which is out since
yesterday.

Gerhard

--
Hakuna matata
http://www.gerhard.fr

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users

[James Strickland]

Everyone, I still can't get the batch menu up and running.

I emerged 0.9.2 and have a stable version of kipiplugins (0.1.3-r1)
installed and still a no go.  The plugins are enabled.  I tried the
full-screen mode and still a no-go.

Any ideas on what I can do?

-Thanks,
James...


On Tue, 2007-10-09 at 12:33 +0200, Gilles Caulier wrote:

> James,
>
> Are you installed "kipi-plugins" package with digiKam 0.9.2 ? (not
> digikamimageplugins witch have been merged to digiKam core with this
> release)
>
> Gilles Caulier
>
> 2007/10/9, James Strickland <[hidden email]>:
>         Greetings all...
>        
>         Here's what I'm trying to do.  I used to use digikam to rename
>         and
>         resize entire directories of photos (via the batch
>         menu).  Now, since I
>         have upgraded and now it doesn't work.  The menu is empty. I
>         have
>         re-emerged digikam, plugins, etc... I can't get it to work at
>         all.  Now.
>         I did get 0.9.2 installed, the plugins were blocking them, so
>         I had to
>         un-emerge the plugins.  After 0.9.2 emerged, when I emerged
>         the plugins,
>         it downgraded digikam back to 0.9.1?  Even before the
>         downgrade, the
>         batch menu was empty.  So, now I'm at 0.9.1 with no batch
>         menu.
>        
>         Any help would be great please.
>        
>         screenshots:  http://strickstuff.com/digikam.html
>        
>         I'm running Sabayon Linux 3.4e x64 (Linux 2.6.22), 1 gig ram.
>        
>         thanks,
>        
>         --
>         James Strickland
>         www.StrickStuff.com
>        
>           -----BEGIN GEEK CODE BLOCK-----
>           Version: 3.1
>           GO d- s+:+ a C++ UL P+ L+++ E- W++ N+ K- O- M- PS-- PGP+
>           t tv+ b- G e h---- y+++
>           ------END GEEK CODE BLOCK------
>        
>         _______________________________________________
>         Digikam-users mailing list
>         [hidden email]
>         https://mail.kde.org/mailman/listinfo/digikam-users
>
> _______________________________________________
> Digikam-users mailing list
> [hidden email]
> https://mail.kde.org/mailman/listinfo/digikam-users

_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users